How would you implement logical operators in DOS Batch files?
You can do and with nested conditions:
if %age% geq 2 (
if %age% leq 12 (
set class=child
)
)
or:
if %age% geq 2 if %age% leq 12 set class=child
You can do or with a separate variable:
set res=F
if %hour% leq 6 set res=T
if %hour% geq 22 set res=T
if "%res%"=="T" (
set state=asleep
)
The IF statement does not support logical operators (AND and OR), cascading IF statements make an implicit conjunction.
IF Exist File1.Dat IF Exist File2.Dat GOTO FILE12_EXIST_LABEL
If File1.Dat and File1.Dat exist then jump the label FILE12_EXIST_LABEL.
See also: IF /?
De Morgan's laws allow us to convert disjunctions ("OR") into logical equivalents using only conjunctions ("AND") and negations ("NOT"). This means we can chain disjunctions ("OR") on to one line.
This means if name is "Yakko" or "Wakko" or "Dot", then echo "Warner brother or sister".
set warner=true
if not "%name%"=="Yakko" if not "%name%"=="Wakko" if not "%name%"=="Dot" set warner=false
if "%warner%"=="true" echo Warner brother or sister
This is another version of paxdiablo's "OR" example, but the conditions are chained on to one line. (Note that the opposite of leq is gtr, and the opposite of geq is lss.)
set res=true
if %hour% gtr 6 if %hour% lss 22 set res=false
if "%res%"=="true" set state=asleep
The following examples show how to make an AND statement (used for setting variables or including parameters for a command).
To start Notepad and close the CMD window:
start notepad.exe & exit
To set variables x, y, and z to values if the variable 'a' equals blah.
IF "%a%"=="blah" (set x=1) & (set y=2) & (set z=3)
Hope that helps!
OR is slightly tricky, but not overly so. Here is an example
set var1=%~1
set var2=%~2
::
set or_=
if "%var1%"=="Stack" set or_=true
if "%var2%"=="Overflow" set or_=true
if defined or_ echo Stack OR Overflow
Try the negation operand - 'not'!
Well, if you can perform 'AND' operation on an if statement using nested 'if's (refer previous answers), then you can do the same thing with 'if not' to perform an 'or' operation.
If you haven't got the idea quite as yet, read on. Otherwise, just don't waste your time and get back to programming.
Just as nested 'if's are satisfied only when all conditions are true, nested 'if not's are satisfied only when all conditions are false. This is similar to what you want to do with an 'or' operand, isn't it?
Even when any one of the conditions in the nested 'if not' is true, the whole statement remains non-satisfied. Hence, you can use negated 'if's in succession by remembering that the body of the condition statement should be what you wanna do if all your nested conditions are false. The body that you actually wanted to give should come under the else statement.
And if you still didn't get the jist of the thing, sorry, I'm 16 and that's the best I can do to explain.
Athul Prakash (age 16 at the time) gave a logical idea for how to implement an OR test by negating the conditions in IF statements and then using the ELSE clause as the location to put the code that requires execution. I thought to myself that there are however two else clauses usually needed since he is suggesting using two IF statements, and so the executed code needs to be written twice. However, if a GOTO is used to skip past the required code, instead of writing ELSE clauses the code for execution only needs to be written once.
Here is a testable example of how I would implement Athul Prakash's negative logic to create an OR.
In my example, someone is allowed to drive a tank if they have a tank licence OR they are doing their military service. Enter true or false at the two prompts and you will be able to see whether the logic allows you to drive a tank.
@ECHO OFF
@SET /p tanklicence=tanklicence:
@SET /p militaryservice=militaryservice:
IF /I NOT %tanklicence%==true IF /I NOT %militaryservice%==true GOTO done
ECHO I am driving a tank with tanklicence set to %tanklicence% and militaryservice set to %militaryservice%
:done
PAUSE
It's just as easy as the following:
AND> if+if
if "%VAR1%"=="VALUE" if "%VAR2%"=="VALUE" *do something*
OR> if // if
set BOTH=0
if "%VAR1%"=="VALUE" if "%VAR2%"=="VALUE" set BOTH=1
if "%BOTH%"=="0" if "%VAR1%"=="VALUE" *do something*
if "%BOTH%"=="0" if "%VAR2%"=="VALUE" *do something*
I know that there are other answers, but I think that the mine is more simple, so more easy to understand. Hope this helps you! ;)
If you have interested to write an if+AND/OR in one statement, then there is no any of it. But, you can still group if with &&/|| and (/) statements to achieve that you want in one line w/o any additional variables and w/o if-else block duplication (single echo command for TRUE and FALSE code sections):
@echo off
setlocal
set "A=1" & set "B=2" & call :IF_AND
set "A=1" & set "B=3" & call :IF_AND
set "A=2" & set "B=2" & call :IF_AND
set "A=2" & set "B=3" & call :IF_AND
echo.
set "A=1" & set "B=2" & call :IF_OR
set "A=1" & set "B=3" & call :IF_OR
set "A=2" & set "B=2" & call :IF_OR
set "A=2" & set "B=3" & call :IF_OR
exit /b 0
:IF_OR
( ( if %A% EQU 1 ( type nul>nul ) else type 2>nul ) || ( if %B% EQU 2 ( type nul>nul ) else type 2>nul ) || ( echo.FALSE-& type 2>nul ) ) && echo TRUE+
exit /b 0
:IF_AND
( ( if %A% EQU 1 ( type nul>nul ) else type 2>nul ) && ( if %B% EQU 2 ( type nul>nul ) else type 2>nul ) && echo.TRUE+ ) || echo.FALSE-
exit /b 0
Output:
TRUE+
FALSE-
FALSE-
FALSE-
TRUE+
TRUE+
TRUE+
FALSE-
The trick is in the type command which drops/sets the errorlevel and so handles the way to the next command.
An alternative is to look for a unix shell which does give you logical operators and a whole lot more. You can get a native win32 implementation of a Bourne shell here if you don't want to go the cygwin route. A native bash can be found here. I'm quite certain you could easily google other good alternatives such as zsh or tcsh.
K
Slight modification to Andry's answer, reducing duplicate type commands:
set "A=1" & set "B=2" & call :IF_AND
set "A=1" & set "B=3" & call :IF_AND
set "A=2" & set "B=2" & call :IF_AND
set "A=2" & set "B=3" & call :IF_AND
echo.
set "A=1" & set "B=2" & call :IF_OR
set "A=1" & set "B=3" & call :IF_OR
set "A=2" & set "B=2" & call :IF_OR
set "A=2" & set "B=3" & call :IF_OR
goto :eof
:IF_OR
(if /i not %A% EQU 1 (
if /i not %B% EQU 2 (
echo FALSE-
type 2>nul
)
)) && echo TRUE+
goto :eof
:IF_AND
(if /i %A% EQU 1 (
if /i %B% EQU 2 (
echo TRUE+
type 2>nul
)
)) && echo FALSE-
goto :eof
来源：https://stackoverflow.com/questions/2143187/logical-operators-and-or-in-dos-batch