So I installed the GPU version of TensorFlow on a Windows 10 machine with a GeForce GTX 980 graphics card on it.
Admittedly, I know very little about graphics cards, but according to dxdiag it does have:
4060MB of dedicated memory (VRAM) and;
8163MB of shared memory
for a total of about 12224MB.
What I noticed, though, is that this "shared" memory seems to be pretty much useless. When I start training a model, the VRAM will fill up and if the memory requirement exceeds these 4GB, TensorFlow will crash with a "resource exhausted" error message.
I CAN, of course, prevent reaching that point by choosing the batch size suitably low, but I do wonder if there's a way to make use of these "extra" 8GB of RAM, or if that's it and TensorFlow requires the memory to be dedicated.
Shared memory is an area of the main system RAM reserved for graphics. References:
https://en.wikipedia.org/wiki/Shared_graphics_memory
https://www.makeuseof.com/tag/can-shared-graphics-finally-compete-with-a-dedicated-graphics-card/
https://youtube.com/watch?v=E5WyJY1zwcQ
This type of memory is what integrated graphics eg Intel HD series typically use.
This is not on your NVIDIA GPU, and CUDA can't use it. Tensorflow can't use it when running on GPU because CUDA can't use it, and also when running on CPU because it's reserved for graphics.
Even if CUDA could use it somehow. It won't be useful because system RAM bandwidth is around 10x less than GPU memory bandwidth, and you have to somehow get the data to and from the GPU over the slow (and high latency) PCIE bus.
Bandwidth numbers for reference : GeForce GTX 980: 224 GB/s DDR4 on desktop motherboard: approx 25GB/s PCIe 16x: 16GB/s
This doesn't take into account latency. In practice, running a GPU compute task on data which is too big to fit in GPU memory and has to be transferred over PCIe every time it is accessed is so slow for most types of compute that doing the same calculation on CPU would be much faster.
Why do you see that kind of memory being allocated when you have a NVIDIA card in your machine? Good question. I can think of a couple of possibilities:
(a) You have both NVIDIA and Intel graphics drivers active (eg as happens when running different displays on both). Uninstaller the Intel drivers and/or disable Intel HD graphics in the BIOS and shared memory will disappear.
(b) NVIDIA is using it. This may be eg extra texture memory, etc. It could also not be real memory but just a memory mapped area that corresponds to GPU memory. Look in the advanced settings of the NVIDIA driver for a setting that controls this.
In any case, no, there isn't anything that Tensorflow can use.
CUDA can make use of the RAM, as well. In CUDA shared memory between VRAM and RAM is called unified memory. However, TensorFlow does not allow it due to performance reasons.
来源：https://stackoverflow.com/questions/47859924/use-shared-gpu-memory-with-tensorflow