What is a practical, real world example of the Linked List?

问题

I understand the definition of a Linked List, but how can it be represented and related to a common concept or item?

For example, composition (EDIT: originally said 'inheritance') in OOP can be related to automobiles. All (most) automobiles in real life are the essentially same thing; an automobile has an Engine, you can start() it, you can make the car go(), stop() and so on. An automobile would typically have a maximum passenger capacity but it would differ between a Bus and a SportsCar, which are both automobiles.

Is there some real life, intuitive example of the plain ole' singly Linked List like we have with inheritance? The typical textbook Linked List example shows a node with an integer and a pointer to the next, and it just doesn't seem very useful.

Your input is appreciated.

回答1:

A linked list is like a conga line. Everyone holds the hips of the person in front of them and their hips are held in turn by the person to their rear, excepting only those in the front and the back. The only way to add people to the line is to find the right spot and decouple that connection, then insert the new person or people.

回答2:

I'm assuming you want a more metaphorical explanation than the book definition, instead of examples of how you could use a linked list.

A linked list is kind of like a scavenger hunt. You have a clue, and that clue has a pointer to place to find the next clue. So you go to the next place and get another piece of data, and another pointer. To get something in the middle, or at the end, the only way to get to it is to follow this list from the beginning (or to cheat ;) )

回答3:

What is a practical, real world example of the Linked List?

The simplest and most straightforward is a train.

Train cars are linked in a specific order so that they may be loaded, unloaded, transferred, dropped off, and picked up in the most efficient manner possible.

For instance, the Jiffy Mix plant needs sugar, flour, cornmeal, etc. Just around the bend might be a paper processing plant that needs chlorine, sulfuric acid, and hydrogen.

Now, we can stop the train, unload each car of its contents, then let the train go on, but then everything else on the train has to sit while flour is sucked out of the caisson, then the sugar, etc.

Instead, the cars are loaded on the train in order so that a whole chunk of it can be detached, and the remainder of the train moves on.

The end of the train is easier to detach than a portion in the middle, and vastly easier than detaching a few cars in one spot, and a few cars in another spot.

If needed, however, you can insert and remove items at any point in the train.

Much like a linked list.

-Adam

回答4:

Waiting line at a teller/cashier, etc...

A series of orders which must be executed in order.

Any FIFO structure can be implemented as a linked list.

回答5:

First thing to understand is that a linked list is conceptually the same as an array.

The only difference is in the efficiency of various operations. Most importantly:

• Insertion in the middle: O(1) for list, O(n) for array.
• Direct access to an element in the middle: O(n) for list, O(1) for array.

Thus any analogy that can be used for an array (all the engines of a plane, all the items on a shopping list...) also applies to a linked list, but the efficiency consideration could make it appropriate to make another analogy:

An array would be boxes in a bookcase. When you remove the box from from the n-th row, all boxes from n+1 up need to be moved one shelf down (so you don't have a troublesome empty shelf).

A linked list, conversely, would be a necklace. When you find you don't like that blue jewel anymore, take it out of the sequence and tie the resulting two ends together. No need to loop through each pearl and displace it just so you can fix your necklace.

回答6:

The way Blame moves around a bunch of software engineers working on different modules in a project.

First, the GUI guy gets blamed for the product not working. He checks his code and sees it's not his fault: the API is screwing up. The API guy checks his code: not his fault, it's a problem with the logger module. Logger module guy now blames database guy, who blames installer guy, who blames...

回答7:

I remember, many years ago, in one of my first college classes, wondering where I would ever , ever use a linked list. Today, I don't think there is a single project I work on where I haven't used one, and in many places. It's an incredibly fundamental data structure, and believe me, it's used heavily in the real world.

For example:

• A list of images that need to be burned to a CD in a medical imaging application
• A list of users of a website that need to be emailed some notification
• A list of objects in a 3D game that need to be rendered to the screen

It may seem slightly useless to you now, but a few years from now, ask yourself the same question, you'll find yourself surprised that you ever wondered where it would be used.

Edit: I noticed in one of your comments you asked about why the pointer matters. Someone rightly answered that the pointer doesn't really matter to a user of a linked list. A user just wants a list that contains a, well, list of things. How that list "contains" that list of things doesn't really matter to the user. The pointer is part of that "how". Imagine a line, drawn on the floor, that leads to a teller. People need to be standing on that line to be able to get to the teller. That line is a (and I admit, this is a bit of a stretch) analogy for the pointer a linked list uses. The first person, at the teller, on the line, is the head of the list. The person directly behind them on the line is the next in the list. And finally, the last person in the line, on the line, is the tail of the list.

回答8:

Your DNA molecules are double-linked lists.

回答9:

A chain:

Especially the roller chain:

Each element of the chain is connected to its successor and predecessor.

回答10:

Real life example for:

**1) Singly linked list **

1. Human brain of a child(In order to remember something eg . poem he has to link it , if you will ask him the last line he will have to read from the first line)
2. message delivery on network (message is broken into packets and each packet has a key of the next one so that at the receiver's end , it will be easy to club them)

2) Doubly linked list

1. DNA molecules
2. Browser cache which allows to use BACK button.
3. Train coaches are connected with the next and the previous ones.
4. Roller chain of bicycle(doubly circular linked list)

3) Circular linked list

1. Escalator
2. Time sharing problem used by the scheduler during the scheduling of the processes in the Operating system.
3. Multiple Player board game

回答11:

If you think about it, a "Link" is simply a way of identifying a "Next", "Previous", "Child" or "Parent" relationship among data instances. So, among real world applications you'll find a broad variety of applications. Think of a simple List (e.g. Grocery List) for basic Linked Lists. But consider too the uses to which we can place Graphs (plotting distances between cities on a map, interactions among species in biology) or Trees (hierarchies in an organization or data in an index of a database for two very diverse examples).

回答12:

In the general case, linked lists are one of the most devilishly useful things you will encounter.

Real world examples:

• A bunch of people waiting in line for something or other - a special kind of LL called a "queue".

• The stack of dishes in your china cabinet - a special kind of LL called a "stack".

• The "take a number" lines (where the numbers have to start over again at "1" at some point) - a special kind of LL called a "circular queue".

Generally the metaphor I like to use for almost all linked data structures though is a deck of cards. Just about anything you can do with linked lists, you can use a deck of cards to visualise. This is particularly handy to show yourself what is going on in some of the more esoteric sorting algorithms.

My personal favorite: Bogosort = play 52 card pickup until your deck is sorted. :-)

回答13:

Human brain can be a good example of singly linked list. In the initial stages of learning something by heart, the natural process is to link one item to next. It's a subconscious act. Let's take an example of mugging up 8 lines of Wordsworth's Solitary Reaper:

Behold her, single in the field,
Yon solitary Highland Lass!
Reaping and singing by herself;
Stop here, or gently pass!
Alone she cuts and binds the grain,
And sings a melancholy strain;
O listen! for the Vale profound
Is overflowing with the sound.

Our mind doesn't work well like an array that facilitates random access. If you ask the guy what's the last line, it will be harder for him to tell. He will have to go from line one to reach there. It's even harder if you ask him what's the fifth line.

At the same time if you give him a pointer, he will go forward. Ok start from Reaping and singing by herself;?. It becomes easier now. It's even easier if you could give him two lines, Alone she cuts and binds the grain, And sings a melancholy strain; because he gets the flow better. Similarly, if you give him nothing at all, he will have to start from the start to get the lines. This is classic linked list.

There should be few anomalies in the analogy which might not fit well, but this somewhat explains how linked list works. Once you become somewhat proficient or know the poem inside-out, the linked list rolls (brain) into a hash table or array which facilitates O(1) lookup where you will be able to pick the lines from anywhere.

回答14:

A linked list can be used to implement a queue. The canonical real life example would be a line for a cashier.

A linked list can also be used to implement a stack. The cononical real ife example would be one of those plate dispensers at a buffet restaurant where pull the top plate off the top of the stack.

回答15:

My first reaction to this question was "Look around! This stuff is everywhere!" But after thinking about it for a bit, I couldn't think of any example that isn't contrived.

The concept of a linked list is a compound concept, a two-fer. You have the notion of a list, which is no problem. A grocery list, for example. Then you get to the link part. One grocery item doesn't know about the next grocery item, so the model breaks down.

I think that the reason you are having trouble with finding a real world eample is that the link part is a programming artifact, an implementation detail. There are many ways to implement lists programatically and one good way is to have each list item know about its neighbors. Another way is to have a List object that keeps track of the items and their order. This is how most lists work in real life. In the example above, the List object for the grocery list would be the paper (or whatever) it's written on.

Maybe it's more useful to think about lists in general and view linked lists as just a specific implementation of a list.

回答16:

Giving travel directions: With each step in the directions being a node, and the travel instruction between each node as your link.

Example:

Node 1: Start at Home

Link: Walk 3 blocks South to Bob's House

Node 2: Bob's house

Link: Walk 2 blocks North to Alice's House.

Node 3: Alice's house

If you want to get one place to another you have to follow the links(instructions) from each intermediate place(node), you can't just skip from home to Alice's.

回答17:

Look at a linked list :

[A]=> [B]=> [C]=> [D]=>

It's a ... Train ! Each railroad car contain something and is attached to another railroad car (or nothing for the last one). You can only add a railroad car at the end and if you want to get rid of one you must attach the previous one with the next one.

回答18:

A telephone chain is implemented directly as a linked list. Here's how it works:

1. A group organizer collects the phone numbers of all members.

2. The organizer assigns each member the number of one other member to call. (Sometimes they will assign their own number so that they know the message got through, but this is optional.)

3. When a message needs to be sent, the organizer calls the head of the list and delivers the message.

4. The head calls the number they were assigned and delivers the message.

5. Step 4 is repeated until everyone has heard the message.

Obviously care must be taken to set up the list in step 2 so that everyone is linked. Also, the list is usually public so that if someone gets an answering machine or busy tone, they can call the next number down and keep the chain moving.

回答19:

A linked list is very similar to a stack of papers, each with one item on it. (As opposed to arrays, which are like pegboards.) It's generally used to solve a problem with these characteristics:

• There are an unknown or changeable number of items
• The items are in an order, like a list
• Items might be rearranged, added in mid-list, deleted in mid-list, etc.

Rearranging a plain array is a pain, adding an element somewhere in the middle while making sure the array has enough memory etc. is a pain. With linked list these operations are simple. Say you wanted to move item #10 to be between item #2 and item #3. With papers, you could just pick it up and move it. With an array, you would have to move items 3 through 9 over a slot, then put it in. With a linked list, you do this: Tell 9 that the one after it is 11, tell 2 the one after it is 10, tell 10 the one after it is 3.

I am using several of them right now, because of how easy it is to add items, and to programmatically say "do this action to every item in the list". One of them is a list of entries, like in a spreadsheet. The other, I make by going through that first list and adding a reference to every item that has a particular value, so that I can do batch operations on them. Being able to pluck items from the middle, or add them to the middle, and not having to worry about array length. Those are the main advantages in my experience.

回答20:

well if a teacher took his students to a cartoon movie but she couldn't get the seats together, she'll ask students to remember the address(seat number) of next student and so on... so that she wouldn't have to face the trouble while going back!!!

回答21:

He did ask for a practical example; so I'll give it a shot:

Lets say you are writing a firewall; in this firewall you have an IP whitelist and an IP blacklist.

You know that your IP, your jobs IP, and some testing IP's need to be whitelisted. So, you add all of the IP's to the whitelist.

Now, you also have a list of known IP's that should be blocked. So, you add those IPs to the blacklist.

Why might use LinkedList for this?

1. The operation is fast for adding/removing an item from the list.
2. You do not know how many IP's are going to blocked/whitelisted. Thus, revealing one of the main advantages to a LinkedList (it's resizable).

回答22:

Best and straight forward example of doubly linked list is Train!

Here Each coach is connected to its previous and next coach(Except first and last)

In terms of programming consider coach body as data(value) node and connector as reference node.

回答23:

Some example of single linked list.

1. Undo button of any application like Microsoft Word, Paint, etc: A linked list of states.
2. GPS Navigation: A linked list of map data. Travelling from origin to destination is example of traversing through all nodes. Rerouting by a GPS is an example of Add and Remove operations of map data.

Some example of double linked list.

1. Browser's Next and Previous Button: a linked list of URLs
2. Microsoft Image Viewer's Next and Previous Button: a linked list of images
3. Undo and Redo button of Photoshop, a linked list of states.

回答24:

I like to think of a circular linked list like a pearl necklace, with each pearl containing a bit of data. You just follow the string to the next pearl of data, and eventually you end up at the beginning again.

回答25:

In the .NET BCL, the class System.Exception has a property called InnerException, which points to another exception or else is null. This forms a linked list.

In System.Type, the BaseType property points to another type in the same way.

回答26:

Inside the make program, you will often find that the dependency lists for a particular file that needs to be built are defined as linked lists of pointers to other files which also need to be built and in turn have dependencies in linked lists.

回答27:

Look at Linked List as a data structure. It's mechanism to represent self-aggregation in OOD. And you may think of it as real world object (for some people it is reality)

回答28:

In operating systems ... one may use a linked list to keep track of what processes are running and what processes are sleeping ... a process that is running and wants to sleep ... gets removed from the LinkedList that keeps track of running processes and once the sleep time is over adds it back to the active process LinkedList

Maybe newer OS are using some funky data structures ... linked lists can be used there

回答29:

A good example of a linked list is your text message, wherein a certain packet a message may be divided into several packets. Each packet holds a key which connects to the next key and to the n-th key to make the whole text message wherein it contains the key and the data.

回答30:

consider 2 or more boxes which have 2 or more compartments. (in this example each box will have 2 compartments) the first compartment will contain some information. a number or a word. the second compartment will hold an arrow pointing to the next box and so on.

note that each box can contain multipale compartments which containt arrows(pointers) and information(data).

来源：https://stackoverflow.com/questions/644167/what-is-a-practical-real-world-example-of-the-linked-list