Regex for names with special characters (Unicode)

问题

Okay, I have read about regex all day now, and still don\'t understand it properly. What i\'m trying to do is validate a name, but the functions i can find for this on the internet only use [a-zA-Z], leaving characters out that i need to accept to.

I basically need a regex that checks that the name is at least two words, and that it does not contain numbers or special characters like !\"#¤%&/()=..., however the words can contain characters like æ, é, Â and so on...

An example of an accepted name would be: \"John Elkjærd\" or \"André Svenson\"
An non-accepted name would be: \"Hans\", \"H4nn3 Andersen\" or \"Martin Henriksen!\"

If it matters i use the javascript .match() function client side and want to use php\'s preg_replace() only \"in negative\" server side. (removing non-matching characters).

Any help would be much appreciated.

Update:
Okay, thanks to Alix Axel\'s answer i have the important part down, the server side one.

But as the page from LightWing\'s answer suggests, i\'m unable to find anything about unicode support for javascript, so i ended up with half a solution for the client side, just checking for at least two words and minimum 5 characters like this:

if(name.match(/\\S+/g).length >= minWords && name.length >= 5) {
  //valid
}

An alternative would be to specify all the unicode characters as suggested in shifty\'s answer, which i might end up doing something like, along with the solution above, but it is a bit unpractical though.

回答1:

Try the following regular expression:

^(?:[\p{L}\p{Mn}\p{Pd}\'\x{2019}]+\s[\p{L}\p{Mn}\p{Pd}\'\x{2019}]+\s?)+$

In PHP this translates to:

if (preg_match('~^(?:[\p{L}\p{Mn}\p{Pd}\'\x{2019}]+\s[\p{L}\p{Mn}\p{Pd}\'\x{2019}]+\s?)+$~u', $name) > 0)
{
    // valid
}

You should read it like this:

^   # start of subject
    (?:     # match this:
        [           # match a:
            \p{L}       # Unicode letter, or
            \p{Mn}      # Unicode accents, or
            \p{Pd}      # Unicode hyphens, or
            \'          # single quote, or
            \x{2019}    # single quote (alternative)
        ]+              # one or more times
        \s          # any kind of space
        [               #match a:
            \p{L}       # Unicode letter, or
            \p{Mn}      # Unicode accents, or
            \p{Pd}      # Unicode hyphens, or
            \'          # single quote, or
            \x{2019}    # single quote (alternative)
        ]+              # one or more times
        \s?         # any kind of space (0 or more times)
    )+      # one or more times
$   # end of subject

I honestly don't know how to port this to Javascript, I'm not even sure Javascript supports Unicode properties but in PHP PCRE this seems to work flawlessly @ IDEOne.com:

$names = array
(
    'Alix',
    'André Svenson',
    'H4nn3 Andersen',
    'Hans',
    'John Elkjærd',
    'Kristoffer la Cour',
    'Marco d\'Almeida',
    'Martin Henriksen!',
);

foreach ($names as $name)
{
    echo sprintf('%s is %s' . "\n", $name, (preg_match('~^(?:[\p{L}\p{Mn}\p{Pd}\'\x{2019}]+\s[\p{L}\p{Mn}\p{Pd}\'\x{2019}]+\s?)+$~u', $name) > 0) ? 'valid' : 'invalid');
}

I'm sorry I can't help you regarding the Javascript part but probably someone here will.

Validates:

John Elkjærd
André Svenson
Marco d'Almeida
Kristoffer la Cour

Invalidates:

Hans
H4nn3 Andersen
Martin Henriksen!

To replace invalid characters, though I'm not sure why you need this, you just need to change it slightly:

$name = preg_replace('~[^\p{L}\p{Mn}\p{Pd}\'\x{2019}\s]~u', '$1', $name);

Examples:

H4nn3 Andersen -> Hnn Andersen
Martin Henriksen! -> Martin Henriksen

Note that you always need to use the u modifier.

回答2:

Regarding JavaScript it is more tricky, since JavaScript Regex syntax doesn't support unicode character properties. A pragmatic solution would be to match letters like this:

[a-zA-Z\xC0-\uFFFF]

This allows letters in all languages and excludes numbers and all the special (non-letter) characters commonly found on keyboards. It is imperfect because it also allows unicode special symbols which are not letters, e.g. emoticons, snowman and so on. However, since these symbols are typically not available on keyboards I don't think they will be entered by accident. So depending on your requirements it may be an acceptable solution.

回答3:

visit this page Unicode Characters in Regular Expression

回答4:

you can add the allowed special chars to the regex.

example:

[a-zA-ZßöäüÖÄÜæé]+

EDIT:

not the best solution, but this would give a result if there are at least to words.

[a-zA-ZßöäüÖÄÜæé]+\s[a-zA-ZßöäüÖÄÜæé]+

回答5:

Here's an optimization over the fantastic answer by @Alix above. It removes the need to define the character class twice, and allows for easier definition of any number of required words.

^(?:[\p{L}\p{Mn}\p{Pd}\'\x{2019}]+(?:$|\s+)){2,}$

It can be broken down as follows:

^         # start
  (?:       # non-capturing group
    [         # match a:
      \p{L}     # Unicode letter, or
      \p{Mn}    # Unicode accents, or
      \p{Pd}    # Unicode hyphens, or
      \'        # single quote, or
      \x{2019}  # single quote (alternative)
    ]+        # one or more times
    (?:       # non-capturing group
      $         # either end-of-string
    |         # or
      \s+       # one or more spaces
    )         # end of group
  ){2,}     # two or more times
$         # end-of-string

Essentially, it is saying to find a word as defined by the character class, then either find one or more spaces or an end of a line. The {2,} at the end tells it that a minimum of two words must be found for a match to succeed. This ensures the OP's "Hans" example will not match.

Lastly, since I found this question while looking for a similar solution for ruby, here is the regular expression as can be used in Ruby 1.9+

\A(?:[\p{L}\p{Mn}\p{Pd}\'\U+2019]+(?:\Z|\s+)){2,}\Z

The primary changes are using \A and \Z for beginning and end of string (instead of line) and Ruby's Unicode character notation.

回答6:

When checking your input string you could

trim() it to remove leading/trailing whitespaces
match against [^\w\s] to detect non-word\non-whitespace characters
match against \s+ to get the number of word separators which equals to number of words + 1.

However I'm not sure that the \w shorthand includes accented characters, but it should fall into "word characters" category.

回答7:

This is the JS regex that I use for fancy names composed with max 3 words (1 to 60 chars), separated by space/single quote/minus sign

^([a-zA-Z\xC0-\uFFFF]{1,60}[ \-\']{0,1}){1,3}$

来源：https://stackoverflow.com/questions/5963228/regex-for-names-with-special-characters-unicode

标签

php

javascript

regex

character-properties