问题
I currently am experimenting with a Raspberry Pi. I am running Snort, which is packet detection software. In the case Snort raises an alert, I would want to execute a (Python) script.
Snort is executed, on a raspberry pi as followed:
sudo snort -q -A console -i eth0 -c /etc/snort/snort.conf
I created a python script that, when called, controls a GPIO pin of a raspberry pi. To bring it more in context; When the raspberry pi receives a ping/ICMP packet, a red alarm light is illuminated and controlled by the same device.
The snort rule currently works, and when an ICMP packet arrives an alert is output to console. I however have no idea how to get snort to execute the python script
回答1:
Below are 3 options, hopefully one will work:
- "Strict"
subprocessapproach using subprocess'sPIPEs - Approach using
pexpect-- "Pexpect is a pure Python module for spawning child applications; controlling them; and responding to expected patterns in their output." -- not that this is the only non-standard package you would have to grab separately from the default python install. - Approach using pseudoterminals and good-old
selectto read file descriptors
Each of the approaches is bundled in a try_[SOME APPROACH] function. You should be able to update the 3 parameters at the top, then comment/uncomment one approach at the bottom to give it a shot.
It may be worthwhile testing both halves independently. In other words snort + my rpi.py (below). Then, if that works, my timed_printer.py (below) and your python script to toggle the RPi GPIO. If they both work independently, then you can be confident not much will need to be done to get the entire workflow operating properly.
Code
import subprocess
_cmd_lst = ['python', '-u', 'timed_printer.py'] # sudo snort -q -A console -i eth0 -c /etc/snort/snort.conf
_rpi_lst = ['python', '-u', 'rpi.py'] # python script that toggles RPi
_alert = 'TIME' # The keyword you're looking for
# in snort output
#===============================================================================
# Simple helper function that calls the RPi toggle script
def toggle_rpi():
subprocess.call(_rpi_lst)
def try_subprocess(cmd_lst, alert, rpi_lst):
p = subprocess.Popen(' '.join(cmd_lst), shell=True, stdout=subprocess.PIPE, bufsize=1)
try:
while True:
for line in iter(p.stdout.readline, b''):
print("try_subprocess() read: %s" % line.strip())
if alert in line:
print("try_subprocess() found alert: %s" % alert)
toggle_rpi()
except KeyboardInterrupt: print(" Caught Ctrl+C -- killing subprocess...")
except Exception as ex: print ex
finally:
print("Cleaning up...")
p.kill()
print("Goodbye.")
def try_pexpect(cmd_lst, alert, rpi_lst):
import pexpect # http://pexpect.sourceforge.net/pexpect.html
p = pexpect.spawn(' '.join(cmd_lst))
try:
while True:
p.expect(alert) # This blocks until <alert> is found in the output of cmd_str
print("try_pexpect() found alert: %s" % alert)
toggle_rpi()
except KeyboardInterrupt: print(" Caught Ctrl+C -- killing subprocess...")
except Exception as ex: print ex
finally:
print("Cleaning up...")
p.close(force=True)
print("Goodbye.")
def try_pty(cmd_lst, alert, rpi_lst, MAX_READ=2048):
import pty, os, select
mfd, sfd = pty.openpty()
p = subprocess.Popen(' '.join(cmd_lst), shell=True, stdout=sfd, bufsize=1)
try:
while True:
rlist, _, _, = select.select([mfd], [], [])
if rlist:
data = os.read(mfd, MAX_READ)
print("try_pty() read: %s" % data.strip())
if not data:
print("try_pty() got EOF -- exiting")
break
if alert in data:
print("try_pty() found alert: %s" % alert)
toggle_rpi()
elif p.poll() is not None:
print("try_pty() had subprocess end -- exiting")
break
except KeyboardInterrupt: print(" Caught Ctrl+C -- killing subprocess...")
except Exception as ex: print ex
finally:
print("Cleaning up...")
os.close(sfd)
os.close(mfd)
p.kill()
print("Goodbye.")
#===============================================================================
try_subprocess(_cmd_lst, _alert, _rpi_lst)
#try_pexpect(_cmd_lst, _alert, _rpi_lst)
#try_pty(_cmd_lst, _alert, _rpi_lst)
Testing notes
To emulate your snort script (a script that "hangs", then prints something, then goes back to hanging, etc), I wrote this simple python script that I called timed_printer.py:
import time
while True:
print("TIME: %s" % time.time())
time.sleep(5)
And my rpi.py file was simply:
print("TOGGLING OUTPUT PIN")
There's no explicit output flushing here, in an attempt to best emulate normal output.
Final considerations
The first approach will read an entire line at a time. So if you expect your alert to be contained within a single line, you'll be fine.
The second approach (pexpect) will block until alert is encountered.
The third approach will read as soon as data is available, which I should point out is not necessarily a full line. If you see try_pty() read: with fragments of the snort output lines, causing you to miss alerts, you'll need to add some sort of buffering solution.
Docs
- subprocess
- pexpect
- pty, select
References: 1, 2
回答2:
You could instead log the alerts to a file and then implement something like this, but you would just do a call to your python script instead of notify-send.
Experimental things in snort can be hard to figure out because there isn't a lot of support out there for them when something goes wrong.
回答3:
If piping the output delays receiving alerts until snort's stdout buffer is flushed:
#!/usr/bin/env python
from __future__ import print_function
from subprocess import Popen, PIPE, STDOUT
snort_process = Popen(['snort', '-A', 'console', '-c', 'snort.conf'],
stdout=PIPE, stderr=STDOUT, bufsize=1,
universal_newlines=True, close_fds=True)
with snort_process.stdout:
for line in iter(snort_process.stdout.readline, ''):
#XXX run python script here:
# subprocess.call([sys.executable or 'python', '-m', 'your_module'])
print(line, end='')
rc = snort_process.wait()
Then you could try a pseudo-tty to enable line-buffereing on snort's side.
Or run snort -A unsock command and print each alert as soon as it is generated using Unix domain sockets:
#!/usr/bin/env python
import ctypes
import os
import socket
from subprocess import Popen
from snort import Alertpkt
# listen for alerts using unix domain sockets (UDS)
snort_log_dir = os.getcwd()
server_address = os.path.join(snort_log_dir, 'snort_alert')
sock = socket.socket(socket.AF_UNIX, socket.SOCK_DGRAM)
try:
os.remove(server_address)
except OSError:
pass
sock.bind(server_address)
# start snort process
snort_process = Popen(['snort', '-A', 'unsock', '-l', snort_log_dir,
'-c', 'snort.conf'], close_fds=True)
# receive alerts
alert = Alertpkt()
try:
while 1:
if sock.recv_into(alert) != ctypes.sizeof(alert):
break # EOF
#XXX run python script here `subprocess.call([sys.executable or 'python', '-m', 'your_module'])`
print("{:03d} {}".format(alert.val, alert.data))
except KeyboardInterrupt:
pass
finally:
sock.close()
os.remove(server_address)
if snort_process.poll() is None: # the process is still running
snort_process.kill()
snort_process.wait() # wait for snort process to exit
In your case you could run a script on each alert instead of printing.
snort.Alertpkt is a ctypes's defition of C struct Alertpkt.
To try it, you could download the gist that contains a dummy snort script in addition to all the python modules and run run-script-on-alert-unsock.py (or run-script-on-alert-pty.py).
来源：https://stackoverflow.com/questions/28753762/execute-script-on-snort-alert