Is there a way to check whether the processor cache has been flushed recently?

问题

On i386 linux. Preferably in c/(c/posix std libs)/proc if possible. If not is there any piece of assembly or third party library that can do this?

Edit: I'm trying to develop test whether a kernel module clear a cache line or the whole proccesor(with wbinvd()). Program runs as root but I'd prefer to stay in user space if possible.

回答1:

Cache coherent systems do their utmost to hide such things from you. I think you will have to observe it indirectly, either by using performance counting registers to detect cache misses or by carefully measuring the time to read a memory location with a high resolution timer.

This program works on my x86_64 box to demonstrate the effects of clflush. It times how long it takes to read a global variable using rdtsc. Being a single instruction tied directly to the CPU clock makes direct use of rdtsc ideal for this.

Here is the output:

took 81 ticks
took 81 ticks
flush: took 387 ticks
took 72 ticks

You see 3 trials: The first ensures i is in the cache (which it is, because it was just zeroed as part of BSS), the second is a read of i that should be in the cache. Then clflush kicks i out of the cache (along with its neighbors) and shows that re-reading it takes significantly longer. A final read verifies it is back in the cache. The results are very reproducible and the difference is substantial enough to easily see the cache misses. If you cared to calibrate the overhead of rdtsc() you could make the difference even more pronounced.

If you can't read the memory address you want to test (although even mmap of /dev/mem should work for these purposes) you may be able to infer what you want if you know the cacheline size and associativity of the cache. Then you can use accessible memory locations to probe the activity in the set you're interested in.

Source code:

#include <stdio.h>
#include <stdint.h>

inline void
clflush(volatile void *p)
{
    asm volatile ("clflush (%0)" :: "r"(p));
}

inline uint64_t
rdtsc()
{
    unsigned long a, d;
    asm volatile ("rdtsc" : "=a" (a), "=d" (d));
    return a | ((uint64_t)d << 32);
}

volatile int i;

inline void
test()
{
    uint64_t start, end;
    volatile int j;

    start = rdtsc();
    j = i;
    end = rdtsc();
    printf("took %lu ticks\n", end - start);
}

int
main(int ac, char **av)
{
    test();
    test();
    printf("flush: ");
    clflush(&i);
    test();
    test();
    return 0;
}

回答2:

I dont know of any generic command to get the the cache state, but there are ways:

1. I guess this is the easiest: If you got your kernel module, just disassemble it and look for cache invalidation / flushing commands (atm. just 3 came to my mind: WBINDVD, CLFLUSH, INVD).
2. You just said it is for i386, but I guess you dont mean a 80386. The problem is that there are many different with different extension and features. E.g. the newest Intel series has some performance/profiling registers for the cache system included, which you can use to evalute cache misses/hits/number of transfers and similar.
3. Similar to 2, very depending on the system you got. But when you have a multiprocessor configuration you could watch the first cache coherence protocol (MESI) with the 2nd.

You mentioned WBINVD - afaik that will always flush complete, i.e. all, cache lines

回答3:

It may not be an answer to your specific question, but have you tried using a cache profiler such as Cachegrind? It can only be used to profile userspace code, but you might be able to use it nonetheless, by e.g. moving the code of your function to userspace if it does not depend on any kernel-specific interfaces.

It might actually be more effective than trying to ask the processor for information that may or may not exist and that will be probably affected by your mere asking about it - yes, Heisenberg was way before his time :-)

来源：https://stackoverflow.com/questions/6041271/is-there-a-way-to-check-whether-the-processor-cache-has-been-flushed-recently