双机高可用、负载均衡、MySQL(读写分离、主从自动切换)架构设计

架构简介

此架构主要是由keepalived实现双机高可用，维护了一个外网VIP,一个内网VIP。正常情况时，外网VIP和内网VIP都绑定在server1服务器，web请求发送到server1的Nginx，nginx对于静态资源请求就直接在本机检索并返回，对于PHP的动态请求，则负载均衡到server1和server2。对于SQL请求，会将此类请求发送到Atlas mysql中间件，Atlas接收到请求之后，把涉及写操作的请求发送到内网VIP，读请求操作发送到server2，这样就实现了读写分离。

当主服务器server1宕机时，keepalived检测到后，立即把外网VIP和内网VIP绑定到server2，并把server2的mysql切换成主库。此时由于外网VIP已经转移到了server2，web请求将发送给server2的nginx。nginx检测到server1宕机，不再把请求转发到server1的php-fpm。之后的sql请求照常发送给本地的atlas，atlas把写操作发送给内网VIP，读操作发送给server2 mysql，由于内网VIP已经绑定到server2了，server2的mysql同时接受写操作和读操作。

当主服务器server1恢复后，keepalived不抢占server2的VIP，继续正常服务。我们可以把server1的mysql切换成主，也可以切换成从。

架构要求

要实现此架构，需要三个条件：

服务器可以设置内网ip，并且设置的内网IP互通;
服务器可以随意绑定IDC分配给我们使用的外网IP，即外网IP没有绑定MAC地址;
MySQL服务器支持GTID，即MySQL-5.6.5以上版本。

环境说明

server1

eth0: 10.96.153.110(对外IP) eth1: 192.168.3.100(对内IP)

server2

eth0: 10.96.153.114(对外IP) eth1: 192.168.3.101(对内IP)

系统都是CentOS-6。

对外VIP: 10.96.153.239 对内VIP: 192.168.3.150

hosts设置

/etc/hosts: 192.168.3.100 server1 192.168.3.101 server2

Nginx PHP MySQL安装

这几个软件的安装推荐使用EZHTTP来完成。

Nginx配置

Server1配置

http { [...]     upstream php-server {            server 192.168.3.101:9000;            server 127.0.0.1:9000;            keepalive 100;     } [...]  server {     [...]         location ~ \.php$ {                         fastcgi_pass   php-server;                         fastcgi_index  index.php;                         fastcgi_param  SCRIPT_FILENAME  $document_root$fastcgi_script_name;                         include        fastcgi_params;         }     [...]  } [...] }

Server2配置

http { [...]     upstream php-server {            server 192.168.3.100:9000;            server 127.0.0.1:9000;            keepalive 100;     } [...]  server {     [...]         location ~ \.php$ {                         fastcgi_pass   php-server;                         fastcgi_index  index.php;                         fastcgi_param  SCRIPT_FILENAME  $document_root$fastcgi_script_name;                         include        fastcgi_params;         }     [...]  } [...] }

这两个配置主要的作用是设置php请求的负载均衡。

MySQL配置

mysql util安装

我们需要安装mysql util里的主从配置工具来实现主从切换。

cd /tmp wget http://dev.mysql.com/get/Downloads/MySQLGUITools/mysql-utilities-1.5.3.tar.gz tar xzf mysql-utilities-1.5.3.tar.gz cd mysql-utilities-1.5.3 python setup.py build python setup.py install

mysql my.cnf配置

server1:

[mysql] [...] protocol=tcp [...] [...] [mysqld] [...] # BINARY LOGGING # log-bin = /usr/local/mysql/data/mysql-bin expire-logs-days = 14 sync-binlog = 1 binlog-format=ROW log-slave-updates=true gtid-mode=on enforce-gtid-consistency =true master-info-repository=TABLE relay-log-info-repository=TABLE sync-master-info=1 server-id=1 report-host=server1 report-port=3306 [...]

server2:

[mysql] [...] protocol=tcp [...] [mysqld] [...] # BINARY LOGGING # log-bin = /usr/local/mysql/data/mysql-bin expire-logs-days = 14 sync-binlog = 1 binlog-format=ROW log-slave-updates=true gtid-mode=on enforce-gtid-consistency =true master-info-repository=TABLE relay-log-info-repository=TABLE sync-master-info=1 server-id=2 report-host=server2 report-port=3306 [...]

这两个配置主要是设置了binlog和启用gtid-mode，并且需要设置不同的server-id和report-host。

开放root帐号远程权限：

我们需要在两台mysql服务器设置root帐号远程访问权限。

mysql> grant all on *.* to 'root'@'192.168.3.%' identified by 'Xp29at5F37' with grant option; mysql> grant all on *.* to 'root'@'server1' identified by 'Xp29at5F37' with grant option; mysql> grant all on *.* to 'root'@'server2' identified by 'Xp29at5F37' with grant option; mysql> flush privileges;

设置mysql主从

在任意一台执行如下命令：

mysqlreplicate --master=root:Xp29at5F37@server1:3306 --slave=root:Xp29at5F37@server2:3306 --rpl-user=rpl:o67DhtaW  # master on server1: ... connected. # slave on server2: ... connected. # Checking for binary logging on master... # Setting up replication... # ...done.

显示主从关系

mysqlrplshow --master=root:Xp29at5F37@server1 --discover-slaves-login=root:Xp29at5F37  # master on server1: ... connected. # Finding slaves for master: server1:3306  # Replication Topology Graph server1:3306 (MASTER) | +--- server2:3306 - (SLAVE)

检查主从状态

mysqlrplcheck --master=root:Xp29at5F37@server1 --slave=root:Xp29at5F37@server2  # master on server1: ... connected. # slave on server2: ... connected. test Description Status --------------------------------------------------------------------------- Checking for binary logging on master [pass] Are there binlog exceptions? [pass] Replication user exists? [pass] Checking server_id values [pass] Checking server_uuid values [pass] Is slave connected to master? [pass] Check master information file [pass] Checking InnoDB compatibility [pass] Checking storage engines compatibility [pass] Checking lower_case_table_names settings [pass] Checking slave delay (seconds behind master) [pass] # ...done.

在server2建立主从切换脚本

vi /data/sh/mysqlfailover.sh  #!/bin/bash mysqlrpladmin --slave=root:Xp29at5F37@server2:3306 failover  chmod +x /data/sh/mysqlfailover.sh

Keepalived配置

keepalived安装(两台都装)

yum -y install keepalived chkconfig keepalived on

keepalived配置(server1)

vi /etc/keepalived/keepalived.conf  vrrp_sync_group VG_1 { group { inside_network outside_network } }   vrrp_instance inside_network { state BACKUP interface eth1 virtual_router_id 51 priority 101 advert_int 1 authentication { auth_type PASS auth_pass 3489 } virtual_ipaddress { 192.168.3.150/24 } nopreempt }   vrrp_instance outside_network { state BACKUP interface eth0 virtual_router_id 50 priority 101 advert_int 1 authentication { auth_type PASS auth_pass 3489 } virtual_ipaddress { 10.96.153.239/24 } nopreempt }

keepalived配置(server2)

vrrp_sync_group VG_1 { group { inside_network outside_network } }   vrrp_instance inside_network { state BACKUP interface eth1 virtual_router_id 51 priority 100 advert_int 1 authentication { auth_type PASS auth_pass 3489 } virtual_ipaddress { 192.168.3.150 } notify_master /data/sh/mysqlfailover.sh }   vrrp_instance outside_network { state BACKUP interface eth0 virtual_router_id 50 priority 100 advert_int 1 authentication { auth_type PASS auth_pass 3489 } virtual_ipaddress { 10.96.153.239/24 } }

此keepalived配置需要注意的是：

两台server的state都设置为backup，server1增加nopreempt配置，并且server1 priority比server2高，这样用来实现当server1从宕机恢复时，不抢占VIP;
server2设置notify_master /data/sh/mysqlfailover.sh,意味着server2接管server1后，执行这个脚本，以把server2的mysql提升为主。

Atlas设置

atlas安装

到这里下载最新版本，https://github.com/Qihoo360/Atlas/releases

cd /tmp wget https://github.com/Qihoo360/Atlas/releases/download/2.2.1/Atlas-2.2.1.el6.x86_64.rpm rpm -i Atlas-2.2.1.el6.x86_64.rpm

atlas配置

cd /usr/local/mysql-proxy/conf cp test.cnf my.cnf vi my.cnf

调整如下参数，

proxy-backend-addresses = 192.168.3.150:3306 proxy-read-only-backend-addresses = 192.168.3.101:3306 pwds = root:qtyU1btXOo074Itvx0UR9Q== event-threads = 8

注意：

proxy-backend-addresse设置为内网VIP
proxy-read-only-backend-addresses设置为server2的IP
root:qtyU1btXOo074Itvx0UR9Q==设置数据库的用户和密码，密码是通过/usr/local/mysql-proxy/bin/encrypt Xp29at5F37生成。更详细参数解释请查看，Atlas配置详解。

启动atlas

/usr/local/mysql-proxy/bin/mysql-proxy --defaults-file=/usr/local/mysql-proxy/conf/my.cnf

之后程序里配置mysql就配置127.0.0.1:1234就好。

server1主宕机测试

测试keepalived是否工作正常，我们来模拟server1宕机。在server1上执行shutdown关机命令。此时我们登录server2，执行ip addr命令，输出如下：

1: lo: mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:0c:29:81:9d:42 brd ff:ff:ff:ff:ff:ff inet 10.96.153.114/24 brd 10.96.153.255 scope global eth0 inet 10.96.153.239/24 scope global secondary eth0 inet6 fe80::20c:29ff:fe81:9d42/64 scope link valid_lft forever preferred_lft forever 3: eth1: mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:0c:29:81:9d:4c brd ff:ff:ff:ff:ff:ff inet 192.168.3.101/24 brd 192.168.3.255 scope global eth1 inet 192.168.3.150/32 scope global eth1 inet6 fe80::20c:29ff:fe81:9d4c/64 scope link valid_lft forever preferred_lft forever 我们看到对外VIP 10.96.153.239和对内IP 192.168.3.150已经转移到server2了，证明keepalived运行正常。

测试是否自动切换了主从，登录server2的mysql服务器，执行show status;命令，如下：

mysql> show slave statusG Empty set (0.00 sec)

我们发现从状态已经为空，证明已经切换为主了。

测试server1是否抢占VIP，为什么要测试这个呢？如果server1恢复之后抢占了VIP，而我们的Atlas里后端设置的是VIP，这样 server1启动之后，sql的写操作就会向server1的mysql发送，而server1的mysql数据是旧于server2的，所以这样会造成数据不一致，这个是非常重要的测试。

我们先来启动server1，之后执行ip addr，输出如下：

1: lo: mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:0c:29:f1:4f:4e brd ff:ff:ff:ff:ff:ff inet 10.96.153.110/24 brd 10.96.153.255 scope global eth0 inet6 fe80::20c:29ff:fef1:4f4e/64 scope link valid_lft forever preferred_lft forever 3: eth1: mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:0c:29:f1:4f:58 brd ff:ff:ff:ff:ff:ff inet 192.168.3.100/24 brd 192.168.3.255 scope global eth1 inet6 fe80::20c:29ff:fef1:4f58/64 scope link valid_lft forever preferred_lft forever

我们看到，server1并没有抢占VIP，测试正常。不过另人郁闷的是，在虚拟机的环境并没有测试成功，不知道为什么。

如何恢复server1

设置server1 mysql为从，server1从宕机中恢复之后，mysql的数据已经旧于server2的数据了，这时我们先设置server1 mysql为从。

mysqlreplicate --master=root:Xp29at5F37@server2:3306 --slave=root:Xp29at5F37@server1:3306 --rpl-user=rpl:o67DhtaW  # master on server2: ... connected. # slave on server1: ... connected. # Checking for binary logging on master... # Setting up replication... # ...done.

看到提示是设置成功了。

获取server1 mysql数据数据同步情况，server1 mysql刚从宕机恢复，有可能数据远远落后于server2 mysql，所以我们先查看它们之间的数据同步情况。登录server1 mysql，执行如下sql:

mysql> show slave statusG *************************** 1. row *************************** Slave_IO_State: Waiting for master to send event Master_Host: server2 Master_User: rpl Master_Port: 3306 Connect_Retry: 60 Master_Log_File: mysql-bin.000004 Read_Master_Log_Pos: 2894 Relay_Log_File: mysql-relay-bin.000002 Relay_Log_Pos: 408 Relay_Master_Log_File: mysql-bin.000004 Slave_IO_Running: yes Slave_SQL_Running: Yes

我们记下Read_Master_Log_Pos的值为2894，登录server2 mysql，执行如下sql:

mysql> show master statusG *************************** 1. row *************************** File: mysql-bin.000004 Position: 2894 Binlog_Do_DB: Binlog_Ignore_DB: Executed_Gtid_Set: 9347e042-9044-11e4-b4f0-000c29f14f4e:1-7, f5bbfc15-904a-11e4-b519-000c29819d42:1-6 1 row in set (0.00 sec)

记下Position的值，并与Read_Master_Log_Pos比较，如果这两个值非常相近或相等，说明数据已经同步得差不多了，可以进行切换操作;如果差得很远，需要等待它们同步完成。

屏蔽mysql写操作

我们需要在切换时先禁止sql的写操作，如果不这样做，就会在切换时造成数据不一致的问题。屏蔽写操作我们在Atlas上操作。在server2执行登录Atlas命令：

mysql -h127.0.0.1 -P2345 -uuser -ppwd  mysql> SELECT * FROM backends; +-------------+--------------------+-------+------+ | backend_ndx | address | state | type | +-------------+--------------------+-------+------+ | 1 | 192.168.3.150:3306 | up | rw | | 2 | 192.168.3.101:3306 | up | ro | +-------------+--------------------+-------+------+ 2 rows in set (0.00 sec)

执行SELECT * FROM backends;后我们看到backend id为1,所以我们执行SET OFFLINE 1;设置此后端下线。

mysql> SET OFFLINE 1; +-------------+--------------------+---------+------+ | backend_ndx | address | state | type | +-------------+--------------------+---------+------+ | 1 | 192.168.3.150:3306 | offline | rw | +-------------+--------------------+---------+------+ 1 row in set (0.00 sec)

mysql> SELECT * FROM backends; +-------------+--------------------+---------+------+ | backend_ndx | address | state | type | +-------------+--------------------+---------+------+ | 1 | 192.168.3.150:3306 | offline | rw | | 2 | 192.168.3.101:3306 | up | ro | +-------------+--------------------+---------+------+ 2 rows in set (0.00 sec)

这时客户端就无法写入数据了。

恢复server1 mysql为主

mysqlrpladmin --master=root:Xp29at5F37@server2:3306 --new-master=root:Xp29at5F37@server1:3306 --demote-master --discover-slaves-login=root:Xp29at5F37 switchover  # Discovering slaves for master at server2:3306 # Discovering slave at server1:3306 # Found slave: server1:3306 # Checking privileges. # Performing switchover from master at server2:3306 to slave at server1:3306. # Checking candidate slave prerequisites. # Checking slaves configuration to master. # Waiting for slaves to catch up to old master. # Stopping slaves. # Performing STOP on all slaves. # Demoting old master to be a slave to the new master. # Switching slaves to new master. # Starting all slaves. # Performing START on all slaves. # Checking slaves for errors. # Switchover complete.

再次检查是否恢复成功.

mysqlrplcheck --master=root:Xp29at5F37@server1 --slave=root:Xp29at5F37@server2  # master on server1: ... connected. # slave on server2: ... connected. Test Description Status --------------------------------------------------------------------------- Checking for binary logging on master [pass] Are there binlog exceptions? [pass] Replication user exists? [pass] Checking server_id values [pass] Checking server_uuid values [pass] Is slave connected to master? [pass] Check master information file [pass] Checking InnoDB compatibility [pass] Checking storage engines compatibility [pass] Checking lower_case_table_names settings [pass] Checking slave delay (seconds behind master) [pass] # ...done.

设置VIP回到server1，在server2机器上执行：

/etc/init.d/keepalived restart

然后在两台机器分别执行ip addr查看ip绑定状态。

设置server2 atlas后端上线

server2上执行mysql -h127.0.0.1 -P2345 -uuser -ppwd登录，然后执行SET ONLINE 1;设置上线（这里1是后端的id，可以使用SELECT * FROM backends;查看）

mysql> SELECT * FROM backends; +-------------+--------------------+-------+------+ | backend_ndx | address | state | type | +-------------+--------------------+-------+------+ | 1 | 192.168.3.150:3306 | up | rw | | 2 | 192.168.3.101:3306 | up | ro | +-------------+--------------------+-------+------+ 2 rows in set (0.00 sec)

到这里server1就恢复为主了。

来源：oschina

链接：https://my.oschina.net/u/588516/blog/756934

标签

mysql