Adding x86 and x64 libraries to NuGet package

问题

I have made a library which depends on CEFsharp which requires to build the library for specific platforms. So no AnyCPU support.

Now I want to pack this into a NuGet. As far as I understand you have to put these files into the build folder and have a .targets file which picks the correct dll to reference. So I ended up with a NuGet package looking like this:

lib
    monodroid
        MyLib.dll
    xamarin.ios10
        MyLib.dll
    net45
        MyLib.dll (x86)
build
    net45
        x86
            MyLib.dll (x86)
        x64
            MyLib.dll (x64)
        MyLib.targets

I put the following inside of the .targets file:

<?xml version="1.0" encoding="utf-8"?>
<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
  <Target Name="PlatformCheck" BeforeTargets="InjectReference"
    Condition="(('$(Platform)' != 'x86') AND  ('$(Platform)' != 'x64'))">
    <Error  Text="$(MSBuildThisFileName) does not work correctly on '$(Platform)' platform. You need to specify platform (x86 or x64)." />
  </Target>

  <Target Name="InjectReference" BeforeTargets="ResolveAssemblyReferences">
    <ItemGroup Condition="'$(Platform)' == 'x86' or '$(Platform)' == 'x64'">
      <Reference Include="MyLib">
        <HintPath>$(MSBuildThisFileDirectory)$(Platform)\MyLib.dll</HintPath>
      </Reference>
    </ItemGroup>
  </Target>
</Project>

So far so good. Now to the problem. When adding this NuGet to a new WPF project, I see the reference to the library appearing in the .csproj file like:

<Reference Include="MyLib, Version=1.0.0.0, Culture=neutral, PublicKeyToken=d64412599724c860, processorArchitecture=x86">
  <HintPath>..\packages\MyLib.0.0.1\lib\net45\MyLib.dll</HintPath>
  <Private>True</Private>
</Reference>

Although I don't see anything mentioned about the .targets file. Is this still the way to do it with NuGet 3? Did I do something wrong? Currently this fails at runtime when running x64 because of the reference to the x86 lib.

回答1:

After fiddling with this for way too long time I figured it out.

Apparently the build.prop and build.target files need to have the exact same name as the NuGet package has, otherwise it will not be added in the csproj file.

EDIT:

I have created a small github repository showing how to use this for your own project.

It demonstrates a solution with 3 projects, one for iOS one for Android and a Net45 which targets both x86 and x64.

Notice, in the .props file. The paths are pointing at the folder structure of the unpacked NuGet. So these paths map to what you have put in your nuspec file.

So as in the repo, you define a nuspec like:

<?xml version="1.0"?>
<package>
  <metadata>
    <id>My.Awesome.Library</id>
    <version>1.0.0</version>
    <title>My Awesome Library</title>
    <description>Herpa Derpa</description>
  </metadata>
  <files>
    <file src="My.Awesome.Library.Droid\bin\Release\My.Awesome.Library.*"
      target="lib\monodroid70" />

    <file src="My.Awesome.Library.iOS\bin\Release\My.Awesome.Library.*"
      target="lib\xamarin.ios10" />

    <file src="My.Awesome.Library.Net45\bin\x64\Release\My.Awesome.Library.*"
      target="build\x64" />

    <file src="My.Awesome.Library.Net45\bin\x86\Release\My.Awesome.Library.*"
      target="build\x86" />
    <file src="My.Awesome.Library.Net45\bin\x86\Release\My.Awesome.Library.*"
      target="lib\net45" />

    <file src="My.Awesome.Library.props" target="build\net45" />
  </files>
</package>

I put my x86 files in build\x86 and x64 files into build\x64. The name of the folder build could essentially be anything in this case, for these files. What matters here is that the props file, below points at these folders for the respective platforms.

I am not sure whether putting the x86 lib into lib\net45 even matters. You can experiment with that. The props file should pick the correct one for you anyways.

<?xml version="1.0" encoding="utf-8"?>
<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
  <ItemGroup>
    <Reference Include="My.Awesome.Library" Condition="'$(Platform)' == 'x86'">
      <HintPath>$(MSBuildThisFileDirectory)..\x86\My.Awesome.Library.dll</HintPath>
    </Reference>
    <Reference Include="My.Awesome.Library" Condition="'$(Platform)' == 'x64'">
      <HintPath>$(MSBuildThisFileDirectory)..\x64\My.Awesome.Library.dll</HintPath>
    </Reference>
  </ItemGroup>
</Project>

In this case $(MSBuildThisFileDirectory) would be the build\net45\ folder, make sure your path correctly points at the dll's. The build\net45 folder is important here. This is how NuGet automatically imports targets and props files.

Also notice the name My.Awesome.Library is pretty consistent all around. What is important here is that the name of your props file, matches the NuGet package ID. Otherwise it seems like NuGet won't import it.

回答2:

There are a few things that I disagree with from the above solution. The nuspec file does not have to have any <Files> information if you use the default file structure by adding the files into a nuget folder. But if you want to run the nuget files from your solution folder then it is needed

better nuspec content:

<?xml version="1.0"?>
<package>
  <metadata>
    <id>YourProjectName</id>
    <version>1.0.0</version>
    <authors>John Doe</authors>
    <title>Your Project Name</title>
    <description>Herpa Derpa</description>
  </metadata>
</package>

I also disagree that he has the .dll in the build folder, these should go in your lib folder and in the build folder should contain your .targets and .props files. The documentation for nuget here mentions this.

Also the lib folder are for .dll's that are in your references. Secondly, .dlls added to your build folder are supplementary dll's that might are needed in some cases-similar to how SQlite does it for it's interop dll. So in this case, the better place to keep them is in the lib folder.

Better folder structure:

- nuget
-- project.nuspec
-- build 
---- YourProjectName.props
---- YourProjectName.targets
-- lib 
--- <x64>
---- YourProjectName.dll
--- <x86>
---- YourProjectName.dll

.props file content:

<?xml version="1.0" encoding="utf-8"?>
<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
  <ItemGroup>
    <Reference Include="YourProjectName" Condition="'$(Platform)' == 'x86'">
          <HintPath>$(MSBuildThisFileDirectory)x86\YourProjectName.dll</HintPath>
        </Reference>
        <Reference Include="YourProjectName" Condition="'$(Platform)' == 'x64'">
          <HintPath>$(MSBuildThisFileDirectory)x64\YourProjectName.dll</HintPath>
        </Reference>
      </ItemGroup>
    </Project>

.targets file content:

<?xml version="1.0" encoding="utf-8"?>
<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
  <Target Name="PlatformCheck" BeforeTargets="InjectReference"
    Condition="(('$(Platform)' != 'x86') AND  ('$(Platform)' != 'x64'))">
    <Error  Text="$(MSBuildThisFileName) does not work correctly on '$(Platform)' platform. You need to specify platform (x86 or x64)." />
  </Target>
  <Target Name="InjectReference" BeforeTargets="ResolveAssemblyReferences">
    <ItemGroup Condition="('$(Platform)' == 'x86' or '$(Platform)' == 'x64') and '$(TargetFrameworkVersion)'=='v4.6'">
      <Reference Include=" YourProjectName ">
        <HintPath>$(MSBuildThisFileDirectory)..\..\lib\net46\$(Platform)\ YourProjectName.dll</HintPath>
      </Reference>
    </ItemGroup>
  </Target>
</Project>

You can check that the above worked by opening your nuspec file with the Nuget Package Manager APP and checking all the files you added are picked up. Now when you add these to a project it will load the dll according to the architecure selected for the project it was referenced in. Also notice in the targets file it will raise an error if "Any CPU" is selected, and inform the user they must choose between x86 and x64

EDIT:

One point that was not clarified well was the naming of the .target and .props needs to be the same as the nuget package file name (meaning the version as well). As without this the double reference would appear when re-opening visual studio.

回答3:

To clarify the whole solution this is the way how it workes perfectly for me

.nuspec file

 <?xml version="1.0"?>
<package>
  <metadata>
    <id>YourProjectName</id>
    <version>1.0.0</version>
    <authors>John Doe</authors>
    <title>Your Project Name</title>
    <description>Herpa Derpa</description>
  </metadata>
</package>

Folder Structure

-- project.nuspec
-- build 
---- YourProjectName.props
---- YourProjectName.targets
-- tools
--- <x64>
---- YourProjectName.dll
--- <x86>
---- YourProjectName.dll

.props file

<?xml version="1.0" encoding="utf-8"?>
<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
  <ItemGroup>
    <Reference Include="YourProjectName" Condition="'$(Platform)' == 'x86'">
          <HintPath>$(MSBuildThisFileDirectory)..\tools\x86\YourProjectName.dll</HintPath>
        </Reference>
        <Reference Include="YourProjectName" Condition="'$(Platform)' == 'x64'">
          <HintPath>$(MSBuildThisFileDirectory)..\tools\\x64\YourProjectName.dll</HintPath>
        </Reference>
      </ItemGroup>
    </Project>

.targets file

<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
  <Target Name="PlatformCheck" BeforeTargets="BuildOnlySettings"
    Condition="(('$(Platform)' != 'x86') AND  ('$(Platform)' != 'x64'))">
    <Error  Text="$(MSBuildThisFileName) does not work correctly on '$(Platform)' platform. You need to specify platform (x86 or x64)." />
  </Target>

</Project>

That's 100% working solution.

来源：https://stackoverflow.com/questions/35179461/adding-x86-and-x64-libraries-to-nuget-package