1. 技术文章
  2. How to properly plot projected gridded data in ggplot2?

How to properly plot projected gridded data in ggplot2?

由 别说谁变了你拦得住时间么 提交于 2019-11-28 17:13:17

问题


I've been using using ggplot2 to plot climatic gridded data for years. These are usually projected NetCDF files. Cells are square in model coordinates, but depending on which projection the model uses, might not be so in the real world.

My usual approach is to remap the data first on a suitable regular grid, and then plot. This introduces a small modification to the data, usually this is acceptable.

However, I've decided this is not good enough anymore: I want to plot the projected data directly, without remapping, as other programs (e.g. ncl) can, if I am not mistaken, do, without touching the model output values.

However, I am encountering some issues. I will detail the possible solutions step-by-step below, from the simplest to the most complex, and their problems. Can we overcome them?

EDIT: thanks to @lbusett's answer I got to this nice function that encompasses the solution. If you like it please upvote @lbusett's answer!

Initial setup

#Load packages
library(raster)
library(ggplot2)

#This gives you the starting data, 's'
load(url('https://files.fm/down.php?i=kew5pxw7&n=loadme.Rdata'))
#If you cannot download the data, maybe you can try to manually download it from http://s000.tinyupload.com/index.php?file_id=04134338934836605121

#Check the data projection, it's Lambert Conformal Conic
projection(s)
#The data (precipitation) has a 'model' grid (125x125, units are integers from 1 to 125)
#for each point a lat-lon value is also assigned
pr <- s[[1]]
lon <- s[[2]]
lat <- s[[3]]

#Lets get the data into data.frames
#Gridded in model units:
pr_df_basic <- as.data.frame(pr, xy=TRUE)
colnames(pr_df_basic) <- c('lon', 'lat', 'pr')
#Projected points:
pr_df <- data.frame(lat=lat[], lon=lon[], pr=pr[])

We created two dataframes, one with model coordinates, one with real lat-lon cross points (centres) for each model cell.

Optional: using a smaller domain

If you want to more clearly see the shapes of the cells, you can subset the data and extract only a small number of model cells. Just be careful that you might need to adjust point sizes, plot limits and other amenities. You can subset like this and then redo the above code part (minus the load()):

s <- crop(s, extent(c(100,120,30,50)))

If you want to fully understand the problem maybe you want to try both the big and the small domain. the code is identical, only the point sizes and map limits change. The values below are for the big complete domain. Ok, now let's plot!

Start with tiles

The most obvious solution is to use tiles. Let's try.

my_theme <- theme_bw() + theme(panel.ontop=TRUE, panel.background=element_blank())
my_cols <- scale_color_distiller(palette='Spectral')
my_fill <- scale_fill_distiller(palette='Spectral')

#Really unprojected square plot:
ggplot(pr_df_basic, aes(y=lat, x=lon, fill=pr)) + geom_tile() + my_theme + my_fill

And this is the result:

Ok, now something more advanced: we use real LAT-LON, using square tiles

ggplot(pr_df, aes(y=lat, x=lon, fill=pr)) + geom_tile(width=1.2, height=1.2) +
    borders('world', xlim=range(pr_df$lon), ylim=range(pr_df$lat), colour='black') + my_theme + my_fill +
    coord_quickmap(xlim=range(pr_df$lon), ylim=range(pr_df$lat)) #the result is weird boxes...

Ok, but those are not the real model squares, this is a hack. Also, model boxes diverge at the top of the domain, and are all oriented in the same way. Not nice. Let's project the squares themselves, even though we already know this is not the right thing to do... maybe it looks good.

#This takes a while, maybe you can trust me with the result
ggplot(pr_df, aes(y=lat, x=lon, fill=pr)) + geom_tile(width=1.5, height=1.5) +
    borders('world', xlim=range(pr_df$lon), ylim=range(pr_df$lat), colour='black') + my_theme + my_fill +
    coord_map('lambert', lat0=30, lat1=65, xlim=c(-20, 39), ylim=c(19, 75))

First of all, this takes a lot of time. Not acceptable. Also, again: these are not correct model cells.

Try with points, not tiles

Maybe we can use round or square points instead of tiles, and project them too!

#Basic 'unprojected' point plot
ggplot(pr_df, aes(y=lat, x=lon, color=pr)) + geom_point(size=2) +
    borders('world', xlim=range(pr_df$lon), ylim=range(pr_df$lat), colour='black') + my_cols + my_theme +
    coord_quickmap(xlim=range(pr_df$lon), ylim=range(pr_df$lat))

We can use square points... and project! We get closer, even though we know that it is still not correct.

#In the following plot pointsize, xlim and ylim were manually set. Setting the wrong values leads to bad results.
#Also the lambert projection values were tired and guessed from the model CRS
ggplot(pr_df, aes(y=lat, x=lon, color=pr)) +
    geom_point(size=2, shape=15) +
    borders('world', xlim=range(pr_df$lon), ylim=range(pr_df$lat), colour='black') + my_theme + my_cols +
    coord_map('lambert', lat0=30, lat1=65, xlim=c(-20, 39), ylim=c(19, 75))

Decent results, but not totally automatic and plotting points is not good enough. I want real model cells, with their shape, mutated by the projection!

Polygons, maybe?

So as you can see I am after a way of correctly plotting the model boxes as projected in the correct shape and position. Of course the model boxes, which are squares in the model, once projected become shapes which are not regular anymore. So maybe I can use polygons, and project them? I tried to use rasterToPolygons and fortify and follow this post, but have failed to do so. I have tried this:

pr2poly <- rasterToPolygons(pr)
#http://mazamascience.com/WorkingWithData/?p=1494
pr2poly@data$id <- rownames(pr2poly@data)
tmp <- fortify(pr2poly, region = "id")
tmp2 <- merge(tmp, pr2poly@data, by = "id")
ggplot(tmp2, aes(x=long, y=lat, group = group, fill=Total.precipitation.flux)) + geom_polygon() + my_fill

Ok, let's try to substitute lat-lons...

tmp2$long <- lon[]
tmp2$lat <- lat[]
#Mh, does not work! See below:
ggplot(tmp2, aes(x=long, y=lat, group = group, fill=Total.precipitation.flux)) + geom_polygon() + my_fill

(sorry that I changed the color scale in the plots)

Mmmmh, not even worth trying with a projection. Maybe I should try to compute the lat-lons of the model cell corners, and create polygons for that, and reproject that?

Conclusion

  1. I want to plot projected model data on its native grid, but I was not able to do so. Using tiles is incorrect, using points is hackish, and using polygons seems not to work for unknown reasons.
  2. When projecting via coord_map(), gridlines and axis labels are wrong. This makes the projected ggplots unusable for publications.

回答1:


After digging a bit more, it seems that your model is based on a 50Km regular grid in "lambert conical" projection. However, the coordinates you have in the netcdf are lat-lon WGS84 coordinates of the center of the "cells".

Given this, a simpler approach is to reconstruct the cells in the original projection and then plot the polygons after converting to an sf object, eventually after reprojection. Something like this should work (notice that you'll need to install the devel version of ggplot2 from github for it to work):

load(url('https://files.fm/down.php?i=kew5pxw7&n=loadme.Rdata'))
library(raster)
library(sf)
library(tidyverse)
library(maps)
devtools::install_github("hadley/ggplot2")

#   ____________________________________________________________________________
#   Transform original data to a SpatialPointsDataFrame in 4326 proj        ####

coords = data.frame(lat = values(s[[2]]), lon = values(s[[3]]))
spPoints <- SpatialPointsDataFrame(coords, 
                                   data = data.frame(data = values(s[[1]])), 
                                   proj4string = CRS("+init=epsg:4326"))

#   ____________________________________________________________________________
#   Convert back the lat-lon coordinates of the points to the original      ###
#   projection of the model (lcc), then convert the points to polygons in lcc
#   projection and convert to an `sf` object to facilitate plotting

orig_grid = spTransform(spPoints, projection(s))
polys = as(SpatialPixelsDataFrame(orig_grid, orig_grid@data, tolerance = 0.149842),"SpatialPolygonsDataFrame")
polys_sf = as(polys, "sf")
points_sf = as(orig_grid, "sf")

#   ____________________________________________________________________________
#   Plot using ggplot - note that now you can reproject on the fly to any    ###
#   projection using `coord_sf`

# Plot in original  projection (note that in this case the cells are squared): 
my_theme <- theme_bw() + theme(panel.ontop=TRUE, panel.background=element_blank())

ggplot(polys_sf) +
  geom_sf(aes(fill = data)) + 
  scale_fill_distiller(palette='Spectral') +
  ggtitle("Precipitations") +
  coord_sf() + 
  my_theme 


# Now Plot in WGS84 latlon projection and add borders: 

ggplot(polys_sf) +
  geom_sf(aes(fill = data)) + 
  scale_fill_distiller(palette='Spectral') +
  ggtitle("Precipitations")  +
  borders('world', colour='black')+
  coord_sf(crs = st_crs(4326), xlim = c(-60, 80), ylim = c(15, 75))+
  my_theme

To add borders also wen plotting in the original projection, however, you'll have to provide the loygon boundaries as an sf object. Borrowing from here:

Converting a "map" object to a "SpatialPolygon" object

Something like this will work:

library(maptools)
borders  <- map("world", fill = T, plot = F)
IDs      <- seq(1,1627,1)
borders  <- map2SpatialPolygons(borders, IDs=borders$names, 
                               proj4string=CRS("+proj=longlat +datum=WGS84")) %>% 
            as("sf")

ggplot(polys_sf) +
  geom_sf(aes(fill = data), color = "transparent") + 
  geom_sf(data = borders, fill = "transparent", color = "black") +
  scale_fill_distiller(palette='Spectral') +
  ggtitle("Precipitations") +
  coord_sf(crs = st_crs(projection(s)), 
           xlim = st_bbox(polys_sf)[c(1,3)],
           ylim = st_bbox(polys_sf)[c(2,4)]) +
  my_theme

As a sidenote, now that we "recovered" the correct spatial reference, it is also possible to build a correct raster dataset. For example: 

r <- s[[1]]
extent(r) <- extent(orig_grid) + 50000

will give you a proper raster in r:

r
class       : RasterLayer 
band        : 1  (of  36  bands)
dimensions  : 125, 125, 15625  (nrow, ncol, ncell)
resolution  : 50000, 50000  (x, y)
extent      : -3150000, 3100000, -3150000, 3100000  (xmin, xmax, ymin, ymax)
coord. ref. : +proj=lcc +lat_1=30. +lat_2=65. +lat_0=48. +lon_0=9.75 +x_0=-25000. +y_0=-25000. +ellps=sphere +a=6371229. +b=6371229. +units=m +no_defs 
data source : in memory
names       : Total.precipitation.flux 
values      : 0, 0.0002373317  (min, max)
z-value     : 1998-01-16 10:30:00 
zvar        : pr

See that now the resolution is 50Km, and the extent is in metric coordinates. You could thus plot/work with r using functions for raster data, such as:

library(rasterVis)
gplot(r) + geom_tile(aes(fill = value)) + 
  scale_fill_distiller(palette="Spectral", na.value = "transparent") +
  my_theme  

library(mapview)
mapview(r, legend = TRUE)



回答2:


"Zooming in" to see the points that are the cell centres. You can see they are in rectangular grid.

I calculated the vertices of the polygons as follows.

  • Convert 125x125 latitudes & longitudes to a matrix

  • Initialize 126x126 matrix for cell vertices (corners).

  • Calculate cell vertices as being mean position of each 2x2 group of points.

  • Add cell vertices for edges & corners (assume cell width & height is equal to width & height of adjacent cells).

  • Generate data.frame with each cell having four vertices, so we end up with 4x125x125 rows.

Code becomes

 pr <- s[[1]]
lon <- s[[2]]
lat <- s[[3]]

#Lets get the data into data.frames
#Gridded in model units:
#Projected points:
lat_m <- as.matrix(lat)
lon_m <- as.matrix(lon)
pr_m <- as.matrix(pr)

#Initialize emptry matrix for vertices
lat_mv <- matrix(,nrow = 126,ncol = 126)
lon_mv <- matrix(,nrow = 126,ncol = 126)


#Calculate centre of each set of (2x2) points to use as vertices
lat_mv[2:125,2:125] <- (lat_m[1:124,1:124] + lat_m[2:125,1:124] + lat_m[2:125,2:125] + lat_m[1:124,2:125])/4
lon_mv[2:125,2:125] <- (lon_m[1:124,1:124] + lon_m[2:125,1:124] + lon_m[2:125,2:125] + lon_m[1:124,2:125])/4

#Top edge
lat_mv[1,2:125] <- lat_mv[2,2:125] - (lat_mv[3,2:125] - lat_mv[2,2:125])
lon_mv[1,2:125] <- lon_mv[2,2:125] - (lon_mv[3,2:125] - lon_mv[2,2:125])

#Bottom Edge
lat_mv[126,2:125] <- lat_mv[125,2:125] + (lat_mv[125,2:125] - lat_mv[124,2:125])
lon_mv[126,2:125] <- lon_mv[125,2:125] + (lon_mv[125,2:125] - lon_mv[124,2:125])

#Left Edge
lat_mv[2:125,1] <- lat_mv[2:125,2] + (lat_mv[2:125,2] - lat_mv[2:125,3])
lon_mv[2:125,1] <- lon_mv[2:125,2] + (lon_mv[2:125,2] - lon_mv[2:125,3])

#Right Edge
lat_mv[2:125,126] <- lat_mv[2:125,125] + (lat_mv[2:125,125] - lat_mv[2:125,124])
lon_mv[2:125,126] <- lon_mv[2:125,125] + (lon_mv[2:125,125] - lon_mv[2:125,124])

#Corners
lat_mv[c(1,126),1] <- lat_mv[c(1,126),2] + (lat_mv[c(1,126),2] - lat_mv[c(1,126),3])
lon_mv[c(1,126),1] <- lon_mv[c(1,126),2] + (lon_mv[c(1,126),2] - lon_mv[c(1,126),3])

lat_mv[c(1,126),126] <- lat_mv[c(1,126),125] + (lat_mv[c(1,126),125] - lat_mv[c(1,126),124])
lon_mv[c(1,126),126] <- lon_mv[c(1,126),125] + (lon_mv[c(1,126),125] - lon_mv[c(1,126),124])


pr_df_orig <- data.frame(lat=lat[], lon=lon[], pr=pr[])

pr_df <- data.frame(lat=as.vector(lat_mv[1:125,1:125]), lon=as.vector(lon_mv[1:125,1:125]), pr=as.vector(pr_m))
pr_df$id <- row.names(pr_df)

pr_df <- rbind(pr_df,
               data.frame(lat=as.vector(lat_mv[1:125,2:126]), lon=as.vector(lon_mv[1:125,2:126]), pr = pr_df$pr, id = pr_df$id),
               data.frame(lat=as.vector(lat_mv[2:126,2:126]), lon=as.vector(lon_mv[2:126,2:126]), pr = pr_df$pr, id = pr_df$id),
               data.frame(lat=as.vector(lat_mv[2:126,1:125]), lon=as.vector(lon_mv[2:126,1:125]), pr = pr_df$pr, id= pr_df$id))

Same zoomed image with polygon cells

Labels Fix

ewbrks <- seq(-180,180,20)
nsbrks <- seq(-90,90,10)
ewlbls <- unlist(lapply(ewbrks, function(x) ifelse(x < 0, paste(abs(x), "°W"), ifelse(x > 0, paste(abs(x), "°E"),x))))
nslbls <- unlist(lapply(nsbrks, function(x) ifelse(x < 0, paste(abs(x), "°S"), ifelse(x > 0, paste(abs(x), "°N"),x))))

Replacing geom_tile & geom_point with geom_polygon

ggplot(pr_df, aes(y=lat, x=lon, fill=pr, group = id)) + geom_polygon() +
    borders('world', xlim=range(pr_df$lon), ylim=range(pr_df$lat), colour='black') + my_theme + my_fill +
    coord_quickmap(xlim=range(pr_df$lon), ylim=range(pr_df$lat)) +
scale_x_continuous(breaks = ewbrks, labels = ewlbls, expand = c(0, 0)) +
scale_y_continuous(breaks = nsbrks, labels = nslbls, expand = c(0, 0)) + 
labs(x = "Longitude", y = "Latitude")


ggplot(pr_df, aes(y=lat, x=lon, fill=pr, group = id)) + geom_polygon() +
    borders('world', xlim=range(pr_df$lon), ylim=range(pr_df$lat), colour='black') + my_theme + my_fill +
    coord_map('lambert', lat0=30, lat1=65, xlim=c(-20, 39), ylim=c(19, 75)) +
scale_x_continuous(breaks = ewbrks, labels = ewlbls, expand = c(0, 0)) +
scale_y_continuous(breaks = nsbrks, labels = nslbls, expand = c(0, 0)) + 
labs(x = "Longitude", y = "Latitude")

Edit - work around for axis ticks

I've been unable to find any quick solution for the grid lines and labels for the latitude. There is probably an R package out there somewhere which will solve your problem with far less code!

Manually setting nsbreaks required and creating data.frame

ewbrks <- seq(-180,180,20)
nsbrks <- c(20,30,40,50,60,70)
nsbrks_posn <- c(-16,-17,-16,-15,-14.5,-13)
ewlbls <- unlist(lapply(ewbrks, function(x) ifelse(x < 0, paste0(abs(x), "° W"), ifelse(x > 0, paste0(abs(x), "° E"),x))))
nslbls <- unlist(lapply(nsbrks, function(x) ifelse(x < 0, paste0(abs(x), "° S"), ifelse(x > 0, paste0(abs(x), "° N"),x))))
latsdf <- data.frame(lon = rep(c(-100,100),length(nsbrks)), lat = rep(nsbrks, each =2), label = rep(nslbls, each =2), posn = rep(nsbrks_posn, each =2))

Remove the y axis tick labels and corresponding gridlines and then add back in "manually" using geom_line and geom_text

ggplot(pr_df, aes(y=lat, x=lon, fill=pr, group = id)) + geom_polygon() +
    borders('world', xlim=range(pr_df$lon), ylim=range(pr_df$lat), colour='black') + my_theme + my_fill +
    coord_map('lambert', lat0=30, lat1=65, xlim=c(-20, 40), ylim=c(19, 75)) +
    scale_x_continuous(breaks = ewbrks, labels = ewlbls, expand = c(0, 0)) +
    scale_y_continuous(expand = c(0, 0), breaks = NULL) + 
    geom_line(data = latsdf, aes(x=lon, y=lat, group = lat), colour = "white", size = 0.5, inherit.aes = FALSE) +
    geom_text(data = latsdf, aes(x = posn, y = (lat-1), label = label), angle = -13, size = 4, inherit.aes = FALSE) +
    labs(x = "Longitude", y = "Latitude") +
    theme( axis.text.y=element_blank(),axis.ticks.y=element_blank())



来源：https://stackoverflow.com/questions/43612903/how-to-properly-plot-projected-gridded-data-in-ggplot2

标签
r
ggplot2
netcdf
map-projections
proj
易学教程内所有资源均来自网络或用户发布的内容，如有违反法律规定的内容欢迎反馈！
该文章没有解决你所遇到的问题?点击提问,说说你的问题,让更多的人一起探讨吧!