1. 技术文章
  2. getting the screen density programmatically in android?

getting the screen density programmatically in android?

由 点点圈 提交于 2019-11-25 22:00:14

问题


How to get the screen density programmatically in android?

I mean: How to find the screen dpi of the current device?


回答1:


You can get info on the display from the DisplayMetrics struct:

DisplayMetrics metrics = getResources().getDisplayMetrics();

Though Android doesn't use a direct pixel mapping, it uses a handful of quantized Density Independent Pixel values then scales to the actual screen size. So the metrics.densityDpi property will be one of the DENSITY_xxx constants (120, 160, 213, 240, 320, 480 or 640 dpi).

If you need the actual lcd pixel density (perhaps for an OpenGL app) you can get it from the metrics.xdpi and metrics.ydpi properties for horizontal and vertical density respectively.

If you are targeting API Levels earlier than 4. The metrics.density property is a floating point scaling factor from the reference density (160dpi). The same value now provided by metrics.densityDpi can be calculated

int densityDpi = (int)(metrics.density * 160f);



回答2:


This also works:

 getResources().getDisplayMetrics().density;

This will give you:

0.75 - ldpi

1.0 - mdpi

1.5 - hdpi

2.0 - xhdpi

3.0 - xxhdpi

4.0 - xxxhdpi

ref: density




回答3:


DisplayMetrics metrics = new DisplayMetrics();
getWindowManager().getDefaultDisplay().getMetrics(metrics);

switch(metrics.densityDpi) {
     case DisplayMetrics.DENSITY_LOW:
         break;

     case DisplayMetrics.DENSITY_MEDIUM:
         break;

     case DisplayMetrics.DENSITY_HIGH:
         break;
}

This will work on API level 4 and higher.




回答4:


Blundell's answer as a static helper method:

private static String getDensityName(Context context) {
    float density = context.getResources().getDisplayMetrics().density;
    if (density >= 4.0) {
        return "xxxhdpi";
    }
    if (density >= 3.0) {
        return "xxhdpi";
    }
    if (density >= 2.0) {
        return "xhdpi";
    }
    if (density >= 1.5) {
        return "hdpi";
    }
    if (density >= 1.0) {
        return "mdpi";
    }
    return "ldpi";
}



回答5:


Try this:

DisplayMetrics dm = context.getResources().getDisplayMetrics();
int densityDpi = dm.densityDpi;



回答6:


To get dpi:

DisplayMetrics dm = new DisplayMetrics();
getWindowManager().getDefaultDisplay().getMetrics(dm);

// will either be DENSITY_LOW, DENSITY_MEDIUM or DENSITY_HIGH
int dpiClassification = dm.densityDpi;

// these will return the actual dpi horizontally and vertically
float xDpi = dm.xdpi;
float yDpi = dm.ydpi;



回答7:


Here are the density constants, source:

There are, in addition to the standard densities, 5 Intermediate ones. Taking into account this fact, the following code will be a complete working example:

float density = getResources().getDisplayMetrics().density;

if (density == 0.75f)
{
    // LDPI
}
else if (density >= 1.0f && density < 1.5f)
{
    // MDPI
}
else if (density == 1.5f)
{
    // HDPI
}
else if (density > 1.5f && density <= 2.0f)
{
    // XHDPI
}
else if (density > 2.0f && density <= 3.0f)
{
    // XXHDPI
}
else
{
    // XXXHDPI 
}

Alternatively, you can find density constants using the densityDpi:

int densityDpi = getResources().getDisplayMetrics().densityDpi;

switch (densityDpi)
{
    case DisplayMetrics.DENSITY_LOW:
        // LDPI
        break;

    case DisplayMetrics.DENSITY_MEDIUM:
        // MDPI
        break;

    case DisplayMetrics.DENSITY_TV:
    case DisplayMetrics.DENSITY_HIGH:
        // HDPI
        break;

    case DisplayMetrics.DENSITY_XHIGH:
    case DisplayMetrics.DENSITY_280:
        // XHDPI
        break;

    case DisplayMetrics.DENSITY_XXHIGH:
    case DisplayMetrics.DENSITY_360:
    case DisplayMetrics.DENSITY_400:
    case DisplayMetrics.DENSITY_420:
        // XXHDPI
        break;

    case DisplayMetrics.DENSITY_XXXHIGH:
    case DisplayMetrics.DENSITY_560:
        // XXXHDPI
        break;
}



回答8:


The following answer is a small improvement based upon qwertzguy's answer. 

double density = getResources().getDisplayMetrics().density;
if (density >= 4.0) {
   //"xxxhdpi";
}
else if (density >= 3.0 && density < 4.0) {
   //xxhdpi
}
else if (density >= 2.0) {
   //xhdpi
}
else if (density >= 1.5 && density < 2.0) {
   //hdpi
}
else if (density >= 1.0 && density < 1.5) {
   //mdpi
}



回答9:


Actualy if you want to have the real display dpi the answer is somewhere in between if you query for display metrics:

DisplayMetrics dm = new DisplayMetrics();
getWindowManager().getDefaultDisplay().getMetrics(dm);
int dpiClassification = dm.densityDpi;
float xDpi = dm.xdpi;
float yDpi = dm.ydpi;

densityDpi * 160 will give you the values/suggestion which density you should use

0.75 - ldpi - 120 dpi
1.0 - mdpi - 160 dpi
1.5 - hdpi - 240 dpi
2.0 - xhdpi - 320 dpi
3.0 - xxhdpi - 480 dpi
4.0 - xxxhdpi - 640 dpi

as specified in previous posts

but dm.xdpi won't give you always the REAL dpi of given display: Example:

Device: Sony ericsson xperia mini pro (SK17i)
Density: 1.0 (e.g. suggests you use 160dpi resources)
xdpi: 193.5238
Real device ppi is arround 193ppi


Device: samsung GT-I8160 (Samsung ace 2)
Density 1.5 (e.g. suggests you use 240dpi resources)
xdpi 160.42105
Real device ppi is arround 246ppi

so maybe real dpi of the display should be Density*xdpi .. but i'm not sure if this is the correct way to do!




回答10:


This should help on your activity ...

void printSecreenInfo(){

    Display display = getWindowManager().getDefaultDisplay();
    DisplayMetrics metrics = new DisplayMetrics();
    display.getMetrics(metrics);

    Log.i(TAG, "density :" +  metrics.density);

    // density interms of dpi
    Log.i(TAG, "D density :" +  metrics.densityDpi);

    // horizontal pixel resolution
    Log.i(TAG, "width pix :" +  metrics.widthPixels);

     // actual horizontal dpi
    Log.i(TAG, "xdpi :" +  metrics.xdpi);

    // actual vertical dpi
    Log.i(TAG, "ydpi :" +  metrics.ydpi);

}

OUTPUT : 

I/test( 1044): density :1.0

I/test( 1044): D density :160

I/test( 1044): width pix :800

I/test( 1044): xdpi :160.0

I/test( 1044): ydpi :160.42105



回答11:


public static String getDensity(Context context) {
    String r;
    DisplayMetrics metrics = new DisplayMetrics();

    if (!(context instanceof Activity)) {
        r = "hdpi";
    } else {
        Activity activity = (Activity) context;
        activity.getWindowManager().getDefaultDisplay().getMetrics(metrics);

        if (metrics.densityDpi <= DisplayMetrics.DENSITY_LOW) {
            r = "ldpi";
        } else if (metrics.densityDpi <= DisplayMetrics.DENSITY_MEDIUM) {
            r = "mdpi";
        } else {
            r = "hdpi";
        }
    }

    return r;
}



回答12:


If you want to retrieve the density from a Service it works like this:

WindowManager wm = (WindowManager) this.getSystemService(Context.WINDOW_SERVICE);
DisplayMetrics metrics = new DisplayMetrics();
wm.getDefaultDisplay().getMetrics(metrics);



回答13:


This should work.

DisplayMetrics dm = new DisplayMetrics();
getWindowManager().getDefaultDisplay().getMetrics(dm);
int width = dm.widthPixels; //320
int height = dm.heightPixels; //480



回答14:


Yet another answer:

/**
* @return "ldpi", "mdpi", "hdpi", "xhdpi", "xhdpi", "xxhdpi", "xxxhdpi", "tvdpi", or "unknown".
*/
public static String getDensityBucket(Resources resources) {
    switch (resources.getDisplayMetrics().densityDpi) {
        case DisplayMetrics.DENSITY_LOW:
            return "ldpi";
        case DisplayMetrics.DENSITY_MEDIUM:
            return "mdpi";
        case DisplayMetrics.DENSITY_HIGH:
            return "hdpi";
        case DisplayMetrics.DENSITY_XHIGH:
            return "xhdpi";
        case DisplayMetrics.DENSITY_XXHIGH:
            return "xxhdpi";
        case DisplayMetrics.DENSITY_XXXHIGH:
            return "xxxhdpi";
        case DisplayMetrics.DENSITY_TV:
            return "tvdpi";
        default:
            return "unknown";
    }
}



回答15:


You Should Try This. Just Added a Method which will find and Show the Toast. That in Which Category the Device Falls.

public static int differentDensityAndScreenSize(Context context) {
  int value = 20;
  String str = "";
  if ((context.getResources().getConfiguration().screenLayout & Configuration.SCREENLAYOUT_SIZE_MASK) == Configuration.SCREENLAYOUT_SIZE_SMALL) {
   switch (context.getResources().getDisplayMetrics().densityDpi) {
   case DisplayMetrics.DENSITY_LOW:
    str = "small-ldpi";
    value = 20;
    break;
   case DisplayMetrics.DENSITY_MEDIUM:
    str = "small-mdpi";
    value = 20;
    break;
   case DisplayMetrics.DENSITY_HIGH:
    str = "small-hdpi";
    value = 20;
    break;
   case DisplayMetrics.DENSITY_XHIGH:
    str = "small-xhdpi";
    value = 20;
    break;
   case DisplayMetrics.DENSITY_XXHIGH:
    str = "small-xxhdpi";
    value = 20;
    break;
   case DisplayMetrics.DENSITY_XXXHIGH:
    str = "small-xxxhdpi";
    value = 20;
    break;
   case DisplayMetrics.DENSITY_TV:
    str = "small-tvdpi";
    value = 20;
    break;
   default:
    str = "small-unknown";
    value = 20;
    break;
   }

  } else if ((context.getResources().getConfiguration().screenLayout & Configuration.SCREENLAYOUT_SIZE_MASK) == Configuration.SCREENLAYOUT_SIZE_NORMAL) {
   switch (context.getResources().getDisplayMetrics().densityDpi) {
   case DisplayMetrics.DENSITY_LOW:
    str = "normal-ldpi";
    value = 82;
    break;
   case DisplayMetrics.DENSITY_MEDIUM:
    str = "normal-mdpi";
    value = 82;
    break;
   case DisplayMetrics.DENSITY_HIGH:
    str = "normal-hdpi";
    value = 82;
    break;
   case DisplayMetrics.DENSITY_XHIGH:
    str = "normal-xhdpi";
    value = 90;
    break;
   case DisplayMetrics.DENSITY_XXHIGH:
    str = "normal-xxhdpi";
    value = 96;
    break;
   case DisplayMetrics.DENSITY_XXXHIGH:
    str = "normal-xxxhdpi";
    value = 96;
    break;
   case DisplayMetrics.DENSITY_TV:
    str = "normal-tvdpi";
    value = 96;
    break;
   default:
    str = "normal-unknown";
    value = 82;
    break;
   }
  } else if ((context.getResources().getConfiguration().screenLayout & Configuration.SCREENLAYOUT_SIZE_MASK) == Configuration.SCREENLAYOUT_SIZE_LARGE) {
   switch (context.getResources().getDisplayMetrics().densityDpi) {
   case DisplayMetrics.DENSITY_LOW:
    str = "large-ldpi";
    value = 78;
    break;
   case DisplayMetrics.DENSITY_MEDIUM:
    str = "large-mdpi";
    value = 78;
    break;
   case DisplayMetrics.DENSITY_HIGH:
    str = "large-hdpi";
    value = 78;
    break;
   case DisplayMetrics.DENSITY_XHIGH:
    str = "large-xhdpi";
    value = 125;
    break;
   case DisplayMetrics.DENSITY_XXHIGH:
    str = "large-xxhdpi";
    value = 125;
    break;
   case DisplayMetrics.DENSITY_XXXHIGH:
    str = "large-xxxhdpi";
    value = 125;
    break;
   case DisplayMetrics.DENSITY_TV:
    str = "large-tvdpi";
    value = 125;
    break;
   default:
    str = "large-unknown";
    value = 78;
    break;
   }

  } else if ((context.getResources().getConfiguration().screenLayout & Configuration.SCREENLAYOUT_SIZE_MASK) == Configuration.SCREENLAYOUT_SIZE_XLARGE) {
   switch (context.getResources().getDisplayMetrics().densityDpi) {
   case DisplayMetrics.DENSITY_LOW:
    str = "xlarge-ldpi";
    value = 125;
    break;
   case DisplayMetrics.DENSITY_MEDIUM:
    str = "xlarge-mdpi";
    value = 125;
    break;
   case DisplayMetrics.DENSITY_HIGH:
    str = "xlarge-hdpi";
    value = 125;
    break;
   case DisplayMetrics.DENSITY_XHIGH:
    str = "xlarge-xhdpi";
    value = 125;
    break;
   case DisplayMetrics.DENSITY_XXHIGH:
    str = "xlarge-xxhdpi";
    value = 125;
    break;
   case DisplayMetrics.DENSITY_XXXHIGH:
    str = "xlarge-xxxhdpi";
    value = 125;
    break;
   case DisplayMetrics.DENSITY_TV:
    str = "xlarge-tvdpi";
    value = 125;
    break;
   default:
    str = "xlarge-unknown";
    value = 125;
    break;
   }
  }
// The Toast will show the Device falls in Which Categories.
Toast.makeText(MainActivity.this, ""+str, Toast.LENGTH_SHORT).show();

  return value;
 }

http://www.androidwarriors.com/2016/01/how-to-find-different-devices-screen.html




回答16:


Try this...

In kotlin

fun determineScreenDensityCode(): String {
      return when (resources.displayMetrics.densityDpi) {
         DisplayMetrics.DENSITY_LOW -> "ldpi"
         DisplayMetrics.DENSITY_MEDIUM -> "mdpi"
         DisplayMetrics.DENSITY_HIGH -> "hdpi"
         DisplayMetrics.DENSITY_XHIGH, DisplayMetrics.DENSITY_280 -> "xhdpi"
         DisplayMetrics.DENSITY_XXHIGH, DisplayMetrics.DENSITY_360, DisplayMetrics.DENSITY_400, DisplayMetrics.DENSITY_420 -> "xxhdpi"
         DisplayMetrics.DENSITY_XXXHIGH, DisplayMetrics.DENSITY_560 -> "xxxhdpi"
         else -> "Unknown code ${resources.displayMetrics.densityDpi}"
     }
}

You can call by println("density: ${determineScreenDensityCode()}") and the output will be System.out: density: xxxhdpi




回答17:


Another way to get the density loaded by the device:

Create values folders for each density

  • values (default mdpi)
  • values-hdpi
  • values-xhdpi
  • values-xxhdpi
  • values-xxxhdpi

Add a string resource in their respective strings.xml:

<string name="screen_density">MDPI</string>    <!-- ..\res\values\strings.xml -->
<string name="screen_density">HDPI</string>    <!-- ..\res\values-hdpi\strings.xml -->
<string name="screen_density">XHDPI</string>   <!-- ..\res\values-xhdpi\strings.xml -->
<string name="screen_density">XXHDPI</string>  <!-- ..\res\values-xxhdpi\strings.xml -->
<string name="screen_density">XXXHDPI</string> <!-- ..\res\values-xxxhdpi\strings.xml -->

Then simply get the string resource, and you have your density:

String screenDensity = getResources().getString(R.string.screen_density);

If the density is larger than XXXHDPI, it will default to XXXHDPI or if it is lower than HDPI it will default to MDPI

I left out LDPI, because for my use case it isn't necessary.




回答18:


I am using following code to access DPI from modules (no need for having access to a context object):

(Resources.getSystem().getDisplayMetrics().xdpi
Resources.getSystem().getDisplayMetrics().ydpi)/2


来源：https://stackoverflow.com/questions/3166501/getting-the-screen-density-programmatically-in-android

标签
android
dpi
screen-density
易学教程内所有资源均来自网络或用户发布的内容，如有违反法律规定的内容欢迎反馈！
该文章没有解决你所遇到的问题?点击提问,说说你的问题,让更多的人一起探讨吧!