问题
I am novice in OpenCV. Recently, I have troubles finding OpenCV functions to convert from Mat to Array. I researched with .ptr and .at methods available in OpenCV APIs, but I could not get proper data. I would like to have direct conversion from Mat to Array(if available, if not to Vector). I need OpenCV functions because the code has to be undergo high level synthesis in Vivado HLS. Please help.
回答1:
If the memory of the Mat mat is continuous (all its data is continuous), you can directly get its data to a 1D array:
std::vector<uchar> array(mat.rows*mat.cols);
if (mat.isContinuous())
array = mat.data;
Otherwise, you have to get its data row by row, e.g. to a 2D array:
uchar **array = new uchar*[mat.rows];
for (int i=0; i<mat.rows; ++i)
array[i] = new uchar[mat.cols];
for (int i=0; i<mat.rows; ++i)
array[i] = mat.ptr<uchar>(i);
UPDATE: It will be easier if you're using std::vector, where you can do like this:
std::vector<uchar> array;
if (mat.isContinuous()) {
// array.assign(mat.datastart, mat.dataend); // <- has problems for sub-matrix like mat = big_mat.row(i)
array.assign(mat.data, mat.data + mat.total());
} else {
for (int i = 0; i < mat.rows; ++i) {
array.insert(array.end(), mat.ptr<uchar>(i), mat.ptr<uchar>(i)+mat.cols);
}
}
p.s.: For cv::Mats of other types, like CV_32F, you should do like this:
std::vector<float> array;
if (mat.isContinuous()) {
// array.assign((float*)mat.datastart, (float*)mat.dataend); // <- has problems for sub-matrix like mat = big_mat.row(i)
array.assign((float*)mat.data, (float*)mat.data + mat.total());
} else {
for (int i = 0; i < mat.rows; ++i) {
array.insert(array.end(), mat.ptr<float>(i), mat.ptr<float>(i)+mat.cols);
}
}
回答2:
Here is another possible solution assuming matrix have one column( you can reshape original Mat to one column Mat via reshape):
Mat matrix= Mat::zeros(20, 1, CV_32FC1);
vector<float> vec;
matrix.col(0).copyTo(vec);
回答3:
Can be done in two lines :)
Mat to array
uchar * arr = image.isContinuous()? image.data: image.clone().data;
uint length = image.total()*image.channels();
Mat to vector
cv::Mat flat = image.reshape(1, image.total()*image.channels());
std::vector<uchar> vec = image.isContinuous()? flat : flat.clone();
Both work for any general cv::Mat.
Explanation with a working example
cv::Mat image;
image = cv::imread(argv[1], cv::IMREAD_UNCHANGED); // Read the file
cv::namedWindow("cvmat", cv::WINDOW_AUTOSIZE );// Create a window for display.
cv::imshow("cvmat", image ); // Show our image inside it.
// flatten the mat.
uint totalElements = image.total()*image.channels(); // Note: image.total() == rows*cols.
cv::Mat flat = image.reshape(1, totalElements); // 1xN mat of 1 channel, O(1) operation
if(!image.isContinuous()) {
flat = flat.clone(); // O(N),
}
// flat.data is your array pointer
auto * ptr = flat.data; // usually, its uchar*
// You have your array, its length is flat.total() [rows=1, cols=totalElements]
// Converting to vector
std::vector<uchar> vec(flat.data, flat.data + flat.total());
// Testing by reconstruction of cvMat
cv::Mat restored = cv::Mat(image.rows, image.cols, image.type(), ptr); // OR vec.data() instead of ptr
cv::namedWindow("reconstructed", cv::WINDOW_AUTOSIZE);
cv::imshow("reconstructed", restored);
cv::waitKey(0);
Extended explanation:
Mat is stored as a contiguous block of memory, if created using one of its constructors or when copied to another Mat using clone() or similar methods. To convert to an array or vector we need the address of its first block and array/vector length.
Pointer to internal memory block
Mat::data is a public uchar pointer to its memory.
But this memory may not be contiguous. As explained in other answers, we can check if mat.data is pointing to contiguous memory or not using mat.isContinous(). Unless you need extreme efficiency, you can obtain a continuous version of the mat using mat.clone() in O(N) time. (N = number of elements from all channels). However, when dealing images read by cv::imread() we will rarely ever encounter a non-continous mat.
Length of array/vector
Q: Should be row*cols*channels right?
A: Not always. It can be rows*cols*x*y*channels.
Q: Should be equal to mat.total()?
A: True for single channel mat. But not for multi-channel mat
Length of the array/vector is slightly tricky because of poor documentation of OpenCV. We have Mat::size public member which stores only the dimensions of single Mat without channels. For RGB image, Mat.size = [rows, cols] and not [rows, cols, channels]. Mat.total() returns total elements in a single channel of the mat which is equal to product of values in mat.size. For RGB image, total() = rows*cols. Thus, for any general Mat, length of continuous memory block would be mat.total()*mat.channels().
Reconstructing Mat from array/vector
Apart from array/vector we also need the original Mat's mat.size [array like] and mat.type() [int]. Then using one of the constructors that take data's pointer, we can obtain original Mat. The optional step argument is not required because our data pointer points to continuous memory. I used this method to pass Mat as Uint8Array between nodejs and C++. This avoided writing C++ bindings for cv::Mat with node-addon-api.
References:
- Create memory continuous Mat
- OpenCV Mat data layout
- Mat from array
回答4:
Instead of getting image row by row, you can put it directly to an array. For CV_8U type image, you can use byte array, for other types check here.
Mat img; // Should be CV_8U for using byte[]
int size = (int)img.total() * img.channels();
byte[] data = new byte[size];
img.get(0, 0, data); // Gets all pixels
回答5:
None of the provided examples here work for the generic case, which are N dimensional matrices. Anything using "rows" assumes theres columns and rows only, a 4 dimensional matrix might have more.
Here is some example code copying a non-continuous N-dimensional matrix into a continuous memory stream - then converts it back into a Cv::Mat
#include <iostream>
#include <cstdint>
#include <cstring>
#include <opencv2/opencv.hpp>
int main(int argc, char**argv)
{
if ( argc != 2 )
{
std::cerr << "Usage: " << argv[0] << " <Image_Path>\n";
return -1;
}
cv::Mat origSource = cv::imread(argv[1],1);
if (!origSource.data) {
std::cerr << "Can't read image";
return -1;
}
// this will select a subsection of the original source image - WITHOUT copying the data
// (the header will point to a region of interest, adjusting data pointers and row step sizes)
cv::Mat sourceMat = origSource(cv::Range(origSource.size[0]/4,(3*origSource.size[0])/4),cv::Range(origSource.size[1]/4,(3*origSource.size[1])/4));
// correctly copy the contents of an N dimensional cv::Mat
// works just as fast as copying a 2D mat, but has much more difficult to read code :)
// see http://stackoverflow.com/questions/18882242/how-do-i-get-the-size-of-a-multi-dimensional-cvmat-mat-or-matnd
// copy this code in your own cvMat_To_Char_Array() function which really OpenCV should provide somehow...
// keep in mind that even Mat::clone() aligns each row at a 4 byte boundary, so uneven sized images always have stepgaps
size_t totalsize = sourceMat.step[sourceMat.dims-1];
const size_t rowsize = sourceMat.step[sourceMat.dims-1] * sourceMat.size[sourceMat.dims-1];
size_t coordinates[sourceMat.dims-1] = {0};
std::cout << "Image dimensions: ";
for (int t=0;t<sourceMat.dims;t++)
{
// calculate total size of multi dimensional matrix by multiplying dimensions
totalsize*=sourceMat.size[t];
std::cout << (t>0?" X ":"") << sourceMat.size[t];
}
// Allocate destination image buffer
uint8_t * imagebuffer = new uint8_t[totalsize];
size_t srcptr=0,dptr=0;
std::cout << std::endl;
std::cout << "One pixel in image has " << sourceMat.step[sourceMat.dims-1] << " bytes" <<std::endl;
std::cout << "Copying data in blocks of " << rowsize << " bytes" << std::endl ;
std::cout << "Total size is " << totalsize << " bytes" << std::endl;
while (dptr<totalsize) {
// we copy entire rows at once, so lowest iterator is always [dims-2]
// this is legal since OpenCV does not use 1 dimensional matrices internally (a 1D matrix is a 2d matrix with only 1 row)
std::memcpy(&imagebuffer[dptr],&(((uint8_t*)sourceMat.data)[srcptr]),rowsize);
// destination matrix has no gaps so rows follow each other directly
dptr += rowsize;
// src matrix can have gaps so we need to calculate the address of the start of the next row the hard way
// see *brief* text in opencv2/core/mat.hpp for address calculation
coordinates[sourceMat.dims-2]++;
srcptr = 0;
for (int t=sourceMat.dims-2;t>=0;t--) {
if (coordinates[t]>=sourceMat.size[t]) {
if (t==0) break;
coordinates[t]=0;
coordinates[t-1]++;
}
srcptr += sourceMat.step[t]*coordinates[t];
}
}
// this constructor assumes that imagebuffer is gap-less (if not, a complete array of step sizes must be given, too)
cv::Mat destination=cv::Mat(sourceMat.dims, sourceMat.size, sourceMat.type(), (void*)imagebuffer);
// and just to proof that sourceImage points to the same memory as origSource, we strike it through
cv::line(sourceMat,cv::Point(0,0),cv::Point(sourceMat.size[1],sourceMat.size[0]),CV_RGB(255,0,0),3);
cv::imshow("original image",origSource);
cv::imshow("partial image",sourceMat);
cv::imshow("copied image",destination);
while (cv::waitKey(60)!='q');
}
回答6:
byte * matToBytes(Mat image)
{
int size = image.total() * image.elemSize();
byte * bytes = new byte[size]; //delete[] later
std::memcpy(bytes,image.data,size * sizeof(byte));
}
回答7:
cv::Mat m;
m.create(10, 10, CV_32FC3);
float *array = (float *)malloc( 3*sizeof(float)*10*10 );
cv::MatConstIterator_<cv::Vec3f> it = m.begin<cv::Vec3f>();
for (unsigned i = 0; it != m.end<cv::Vec3f>(); it++ ) {
for ( unsigned j = 0; j < 3; j++ ) {
*(array + i ) = (*it)[j];
i++;
}
}
Now you have a float array. In case of 8 bit, simply change float to uchar and Vec3f to Vec3b and CV_32FC3 to CV_8UC3
来源：https://stackoverflow.com/questions/26681713/convert-mat-to-array-vector-in-opencv