\\n vs. PHP_EOL vs. <br>?

别等时光非礼了梦想. 提交于 2019-11-28 04:42:32

DOS, Unix, and Mac (pre-OS X and OS X) all use different characters or character combinations to represent "go to the next line."

  • DOS - Uses a CR+LF (that's ASCII 13 followed by an ASCII 10, or \r\n) to represent a new line.

  • Unix - Uses an LF (that's ASCII 10, or \n) to represent a new line.

  • Mac (pre-OS X) - Uses a CR (that's ASCII 13, or \r) to represent a new line.

  • Mac (OS X) - Like Unix, uses an LF to represent a new line.

Therefore, when to use each one depends on what you're going for. If you're writing for a specific platform without the intention of portability, use the character or character combination to break lines that matter to that platform. The purpose of PHP_EOL is to automatically choose the correct character for the platform, so that your new lines are platform-independent.

All of these appear as a single space within a browser as browsers collapse whitespace into a display space for display purposes (unless you're using <pre> as you mentioned, or CSS that changes the behavior of whitespace). This is where <br> comes in, as you've mentioned, which will convert these \n new line characters into <br> so that they provide line breaks in HTML display.

<br>

<br> is only to be used when dividing up text. You may see this used for spacing out elements within an html document, but that is not its purpose, as layout spacing should be achieved with CSS such as margin. Here's a decent use case:

<p>This <br> is <br> some <br> text.</p>

I typically break up my text with linebreaks for readability, so I wouldn't want the linebreaks rendered in the document. That being, the <br> tag is necessary.

CSS whitespace, <pre>

The html element <pre> is an element that, by default, uses CSS rule white-space: pre; so that the document's whitespace is rendered within that element. Normally, only a single space would be rendered regardless of the amount of whitespace in the document. A very good use of this style is for code blocks. If I write a code block, I will naturally space it as I intend and don't particularly care to wrap a <p> tag around each line (that's not semantic anyway) and I don't want to litter my code with <br> either. Even worse, there's the code indentation! whitespace: pre makes a lot of sense here.

<pre>
function foo() {
  //etc
}
</pre>

\r, \n, PHP_EOL

Depending on the platform your php code is running from, you'll need to render a linebreak with \r, \n\, or both \r\n. PHP_EOL will automatically choose for you, so it is the most dynamic approach.

It makes no sense to compare a HTML linebreak <br> with actual text linebreaks. <br> is only a linepage in the browser's rendering of a website whereas \n and PHP_EOL are actual, source code linebreaks.

As you mention yourself, PHP_EOL will work regardless of platform and is therefore also preferred over \n. Initially, \n was only the standard linebreak on UNIX, whereas Macintosh used \r and Windows/DOS used a combination of the two: \r\n. When using PHP_EOL, however, you don't have to worry about platform at all.

Nowadays, most systems and editors are tolerant enough to accept whatever linebreak you decide to use, but using the correct one is obviously preferred and most-easily achieved with PHP_EOL, so there's really no reason not to use it.

I have to run scripts on cron and save results to a log file. But sometimes I run the script on my browser. So I do the following test in order to use the correct end of line char:

<?php
$eol = (isset($_SERVER['SHELL'])) ? PHP_EOL : "<br />";
echo "DISCOVER". $eol;
?>

You can create a function with Flavio's code, that always sets the correct newline, no matter if you run it on the shell or in the browser:

<?php
function nl($string) {
  if(isset($_SERVER['SHELL'])) return preg_replace('/\<br(\s*)?\/?\>/i', PHP_EOL, $string);
  return nl2br($string);
}


print nl("One\nTwo<br>Three\r\nFour<br />Five
Six" . PHP_EOL);
?>

<br>

It was created for HTML designing... <br> will not work in many places until it supports content type is <HTML>

an example1 in mail functions where the content type is text... <br> will not work but /n will work.

more examples where you will see different results.

example 2

<html>
<body>
<script>
document.write("Hello \n World!");
</script>
 </body>
</html>

As document.write writes to the DOM you need to use
for a newline. Relevant MDN docs

example3

txt = "Hello \n World!" ; 
alert(txt);

because alert function is asking a message to be shown to the user it isn't the same as a popup window with HTML in it

/n

is basically common in most of the programming languages for a line break and it will work within most of the platforms. \n and PHP_EOL are actual, source code linebreaks.

The constant PHP_EOL should generally be used for platform-specific output.

Mostly for file output really. Actually, the file functions already transform \n ←→ \r\n on Windows systems unless used in fopen(…, "wb") binary mode. For file input, you should prefer \n however. While most network protocols (HTTP) are supposed to use \r\n, that's not guaranteed.

Therefore it's best to break up on \n and remove any optional \r manually:

example

$lines = array_map("rtrim", explode("\n", $content));

A more robust and terser alternative is using preg_split() and a regexp:

$lines = preg_split("/\R/", $content);

The \R placeholder detects any combination of \r + \n. So would be safest, and even work for Classic MacOS ≤ 9 text files (rarely seen in practice).

Beware that old Macs use \r, this would be a better solution: preg_replace('~\r\n?~', "\n", $str);

PHP_EOL

should be used when writing output such as log files.

It will produce the line break specific to your platform.

it is a constant holding the line break character(s) used by the server platform. In the case of Windows, it's \r\n. On *nix, it's \n. You apparently have a Windows server.

标签
易学教程内所有资源均来自网络或用户发布的内容,如有违反法律规定的内容欢迎反馈
该文章没有解决你所遇到的问题?点击提问,说说你的问题,让更多的人一起探讨吧!