Create a copy of method from IL

老子叫甜甜 提交于 2021-01-27 03:50:39

问题


I am trying to create a copy of a method during runtime using reflection.

I have the following code.

public static R CopyMethod<T, R>(Func<T, R> f, T t)
{
    AppDomain currentDom = Thread.GetDomain();
    AssemblyName asm = new AssemblyName();
    asm.Name = "DynamicAssembly";
    AssemblyBuilder abl = currentDom.DefineDynamicAssembly(asm, AssemblyBuilderAccess.Run);
    ModuleBuilder mbl = abl.DefineDynamicModule("Module");
    TypeBuilder tbl = mbl.DefineType("Type");
    var info = f.GetMethodInfo();
    MethodBuilder mtbl = tbl.DefineMethod(info.Name, info.Attributes, info.CallingConvention, info.ReturnType, info.GetParameters().Select(x => x.ParameterType).ToArray());

    byte[] il = f.Method.GetMethodBody().GetILAsByteArray();

    mtbl.CreateMethodBody(il, il.Length);
    Type type = tbl.CreateType();
    Func<T, R> method = type.GetMethod(info.Name).CreateDelegate(typeof(Func<T, R>)) as Func<T, R>;
    return method(t);
}

The last line throws an exception with message:

Common Language Runtime detected an invalid program.

Is there another way of doing this? I would prefer being able to get the parse tree of the method instead of using IL directly.

EDIT 1:

I am testing with the following function.

public static int Fib(int n)
{
    /*if (n < 2)
        return 1;
    return Fib(n - 1) + Fib(n - 2);*/
    return n;
}

Testing with the following line.

int x = Copy.CopyMethod(Copy.Fib, 10);

EDIT 2:

Rob's answer helps address the above issue. However, when using the Fib() method that is slightly more complicated (e.g. the commented Fibonacci method), the program crashes with the following message.

Index not found. (Exception from HRESULT: 0x80131124)

EDIT 3:

I have tried several suggestions from comments, but the metadata token cannot be located within the dynamic assembly.

public static R CopyMethod<T, R>(Func<T, R> f, T t)
{
    AppDomain currentDom = Thread.GetDomain();
    AssemblyName asm = new AssemblyName("DynamicAssembly");
    AssemblyBuilder abl = currentDom.DefineDynamicAssembly(asm, AssemblyBuilderAccess.Run);
    ModuleBuilder mbl = abl.DefineDynamicModule("Module");
    TypeBuilder tbl = mbl.DefineType("Type");
    MethodInfo info = f.GetMethodInfo();
    MethodBuilder mtbl = tbl.DefineMethod(info.Name, info.Attributes, info.CallingConvention, info.ReturnType, info.GetParameters().Select(x => x.ParameterType).ToArray());
    MethodBody mb = f.Method.GetMethodBody();
    byte[] il = mb.GetILAsByteArray();

    OpCode[] opCodes = GetOpCodes(il);
    Globals.LoadOpCodes();
    MethodBodyReader mbr = new MethodBodyReader(info);
    string code = mbr.GetBodyCode();
    Console.WriteLine(code);

    ILGenerator ilg = mtbl.GetILGenerator();
    ilg.DeclareLocal(typeof(int[]));
    ilg.DeclareLocal(typeof(int));
    for (int i = 0; i < opCodes.Length; ++i)
    {
        if (opCodes[i].OperandType == OperandType.InlineType)
        {
            int token;
            Type tp = info.Module.ResolveType(token = BitConverter.ToInt32(il, i + 1), info.DeclaringType.GetGenericArguments(), info.GetGenericArguments());
            ilg.Emit(opCodes[i], tp.MetadataToken);
            i += 4;
            continue;
        }
        if (opCodes[i].FlowControl == FlowControl.Call)
        {
            int token;
            MethodBase mi = info.Module.ResolveMethod(token = BitConverter.ToInt32(il, i + 1));
            ilg.Emit(opCodes[i], mi.MetadataToken);
            i += 4;
            continue;
        }
        ilg.Emit(opCodes[i]);
    }

    Type type = tbl.CreateType();
    Func<T, R> method = type.GetMethod(info.Name).CreateDelegate(typeof(Func<T, R>)) as Func<T, R>;
    return method(t);
}

The following also does not work.

var sigHelp = SignatureHelper.GetLocalVarSigHelper(mtbl.Module);
mtbl.SetMethodBody(il, mb.MaxStackSize, sigHelp.GetSignature(), null, new int[] { 3 });

I can fix the recursive function calls by changing the metadata token the following way (I realize that this will not work in all cases, but I am trying to get it to work in some way).

if (opCodes[i].FlowControl == FlowControl.Call)
{
    ilg.Emit(opCodes[i], mtbl);
    i += 4;
}

I can build a dynamic method using the approach suggested in the answer to the related question: Reference a collection from IL constructed method. However, when trying to do the same here, it fails.


回答1:


I managed to implement the reconstruction based on the very helpful discussion in the comments. It does not address all possible scenarios, but illustrates the solution very well.

public static R CopyMethod<T, R>(Func<T, R> f, T t)
{
    AppDomain currentDom = Thread.GetDomain();
    AssemblyName asm = new AssemblyName("DynamicAssembly");
    AssemblyBuilder abl = currentDom.DefineDynamicAssembly(asm, AssemblyBuilderAccess.Run);
    ModuleBuilder mbl = abl.DefineDynamicModule("Module");
    TypeBuilder tbl = mbl.DefineType("Type");
    MethodInfo info = f.GetMethodInfo();
    MethodBuilder mtbl = tbl.DefineMethod(info.Name, info.Attributes, info.CallingConvention, info.ReturnType, info.GetParameters().Select(x => x.ParameterType).ToArray());
    MethodBody mb = f.Method.GetMethodBody();
    byte[] il = mb.GetILAsByteArray();
    ILGenerator ilg = mtbl.GetILGenerator();
    foreach (var local in mb.LocalVariables)
        ilg.DeclareLocal(local.LocalType);
    for (int i = 0; i < opCodes.Length; ++i)
    {
        if (!opCodes[i].code.HasValue)
            continue;
        OpCode opCode = opCodes[i].code.Value;
        if (opCode.OperandType == OperandType.InlineBrTarget)
        {
            ilg.Emit(opCode, BitConverter.ToInt32(il, i + 1));
            i += 4;
            continue;
        }
        if (opCode.OperandType == OperandType.ShortInlineBrTarget)
        {
            ilg.Emit(opCode, il[i + 1]);
            ++i;
            continue;
        }
        if (opCode.OperandType == OperandType.InlineType)
        {
            Type tp = info.Module.ResolveType(BitConverter.ToInt32(il, i + 1), info.DeclaringType.GetGenericArguments(), info.GetGenericArguments());
            ilg.Emit(opCode, tp);
            i += 4;
            continue;
        }
        if (opCode.FlowControl == FlowControl.Call)
        {
            MethodInfo mi = info.Module.ResolveMethod(BitConverter.ToInt32(il, i + 1)) as MethodInfo;
            if (mi == info)
                ilg.Emit(opCode, mtbl);
            else
                ilg.Emit(opCode, mi);
            i += 4;
            continue;
        }
        ilg.Emit(opCode);
    }

    Type type = tbl.CreateType();
    Func<T, R> method = type.GetMethod(info.Name).CreateDelegate(typeof(Func<T, R>)) as Func<T, R>;
    return method(t);
}

static OpCodeContainer[] GetOpCodes(byte[] data)
{
    List<OpCodeContainer> opCodes = new List<OpCodeContainer>();
    foreach (byte opCodeByte in data)
        opCodes.Add(new OpCodeContainer(opCodeByte));
    return opCodes.ToArray();
}

class OpCodeContainer
{
    public OpCode? code;
    byte data;

    public OpCodeContainer(byte opCode)
    {
        data = opCode;
        try
        {
            code = (OpCode)typeof(OpCodes).GetFields().First(t => ((OpCode)(t.GetValue(null))).Value == opCode).GetValue(null);
        }
        catch { }
    }
}



回答2:


The problem with the helpful solution from Igor is that it uses ResolveMethod on the info passed to the function. This means that it will be casting the cloned instance to the original type (which shouldn't be allowed but we're in IL!) and then calling the original method. e.g. if I have two methods in my original class, TestClass, called SimpleMethod and MethodCallingSimpleMethod then the copied type will do something like this:

internal class Type
{
  public int SimpleMethod([In] int obj0, [In] string obj1)
  {
    return obj0 + obj1.Length;
  }

  public int MethodCallingSimpleMethod([In] string obj0)
  {
    if (string.IsNullOrEmpty(obj0))
      return 0;
    return ((TestClass) this).SimpleMethod(42, obj0);
  }
}

To implement this fully we'd need to find dependencies between methods. Copy them in the correct order and then use the meta-token to resolve to the original MethodInfo and then look up the already copied method info in the new type.

Non-trivial.

Same sort of thing would be required for fields but simpler as we can do the fields first and then the methods that reference them.



来源:https://stackoverflow.com/questions/34935659/create-a-copy-of-method-from-il

易学教程内所有资源均来自网络或用户发布的内容,如有违反法律规定的内容欢迎反馈
该文章没有解决你所遇到的问题?点击提问,说说你的问题,让更多的人一起探讨吧!