How to unload an assembly from the primary AppDomain?

谁都会走 提交于 2019-11-26 04:47:20

问题


I would like to know how to unload an assembly that is loaded into the main AppDomain.

I have the following code:

var assembly = Assembly.LoadFrom( FilePathHere );

I need/want to be able to unload this assembly when I am done.

Thanks for your help.


回答1:


For .net versions core 3.0 and later:

You can now unload assemblies. Note that appdomains are no longer available in .net core. Instead, you can create one or more AssemblyLoadContext, load your assemblies via that context, then unload that context. See AssemblyLoadContext, or this tutorial that simulates loading a plugin then unloading it.

For .net versions before .net core 3, including netframework 4 and lower

You can not unload an assembly from an appdomain. You can destroy appdomains, but once an assembly is loaded into an appdomain, it's there for the life of the appdomain.

See Jason Zander's explanation of Why isn't there an Assembly.Unload method?

If you are using 3.5, you can use the AddIn Framework to make it easier to manage/call into different AppDomains (which you can unload, unloading all the assemblies). If you are using versions before that, you need to create a new appdomain yourself to unload it.




回答2:


I also know this is very old, but may help someone who is having this issue! Here is one way I have found to do it! instead of using:

var assembly = Assembly.LoadFrom( FilePathHere );

use this:

var assembly = Assembly.Load( File.ReadAllBytes(FilePathHere));

This actually loads the "Contents" of the assembly file, instead of the file itself. Which means there is NOT a file lock placed on the assembly file! So now it can be copied over, deleted or upgraded without closing your application or trying to use a separate AppDomain or Marshaling!

PROS: Very Simple to fix with a 1 Liner of code! CONS: Cannot use AppDomain, Assembly.Location or Assembly.CodeBase.

Now you just need to destroy any instances created on the assembly. For example:

assembly = null;



回答3:


You can't unload an assembly without unloading the whole AppDomain. Here's why:

  1. You are running that code in the app domain. That means there are potentially call sites and call stacks with addresses in them that are expecting to keep working.

  2. Say you did manage to track all handles and references to already running code by an assembly. Assuming you didn't ngen the code, once you successfully freed up the assembly, you have only freed up the metadata and IL. The JIT'd code is still allocated in the app domain loader heap (JIT'd methods are allocated sequentially in a buffer in the order in which they are called).

  3. The final issue relates to code which has been loaded shared, otherwise more formally know as "domain neutral" (check out /shared on the ngen tool). In this mode, the code for an assembly is generated to be executed from any app domain (nothing hard wired).

It is recommended that you design your application around the application domain boundary naturally, where unload is fully supported.




回答4:


You should load your temporary assemblies in another AppDomain and when not in use then you can unload that AppDomain. It's safe and fast.




回答5:


If you want to have temporary code which can be unloaded afterwards, depending on your needs the DynamicMethod class might do what you want. That doesn't give you classes, though.




回答6:


Here is a GOOD example how to compile and run dll during run time and then unload all resources: http://www.west-wind.com/presentations/dynamicCode/DynamicCode.htm




回答7:


I know its old but might help someone. You can load the file from stream and release it. It worked for me. I found the solution HERE.

Hope it helps.




回答8:


As an alternative, if the assembly was just loaded in the first place, to check information of the assembly like the publicKey, the better way would be to not load it,and rather check the information by loading just the AssemblyName at first:

AssemblyName an = AssemblyName.GetAssemblyName ("myfile.exe");
byte[] publicKey = an.GetPublicKey();
CultureInfo culture = an.CultureInfo;
Version version = an.Version;

EDIT

If you need to reflect the types in the assembly without getting the assembly in to your app domain, you can use the Assembly.ReflectionOnlyLoadFrom method. this will allow you to look at they types in the assembly but not allow you to instantiate them, and will also not load the assembly in to the AppDomain.

Look at this example as exlanation

public void AssemblyLoadTest(string assemblyToLoad)
{
    var initialAppDomainAssemblyCount = AppDomain.CurrentDomain.GetAssemblies().Count(); //4

    Assembly.ReflectionOnlyLoad(assemblyToLoad);
    var reflectionOnlyAppDomainAssemblyCount = AppDomain.CurrentDomain.GetAssemblies().Count(); //4

    //Shows that assembly is NOT loaded in to AppDomain with Assembly.ReflectionOnlyLoad
    Assert.AreEqual(initialAppDomainAssemblyCount, reflectionOnlyAppDomainAssemblyCount); // 4 == 4

    Assembly.Load(assemblyToLoad);
    var loadAppDomainAssemblyCount = AppDomain.CurrentDomain.GetAssemblies().Count(); //5

    //Shows that assembly is loaded in to AppDomain with Assembly.Load
    Assert.AreNotEqual(initialAppDomainAssemblyCount, loadAppDomainAssemblyCount); // 4 != 5
}


来源:https://stackoverflow.com/questions/123391/how-to-unload-an-assembly-from-the-primary-appdomain

标签
易学教程内所有资源均来自网络或用户发布的内容,如有违反法律规定的内容欢迎反馈
该文章没有解决你所遇到的问题?点击提问,说说你的问题,让更多的人一起探讨吧!