1、插入内表行:
*插入内表行:
DATA: BEGIN OF man, name(20) TYPE c, high TYPE p DECIMALS 2, weight TYPE p DECIMALS 2, END OF man. DATA: man1 LIKE TABLE OF man. man-name = '张参'. man-high = '1.68'. man-weight = 120. INSERT man INTO TABLE man1. man-name = '刘志'. man-high = '1.78'. man-weight = 160. INSERT man INTO TABLE man1. LOOP AT man1 INTO man. WRITE: / man-name,man-high,man-weight. ENDLOOP. ULINE. man-name = '钱华'. man-high = '2.22'. man-weight = 220. INSERT man INTO man1 INDEX 3. LOOP AT man1 INTO man. WRITE: / man-name,man-high,man-weight. ENDLOOP. ULINE. man-name = '钱华'. man-high = '2.22'. man-weight = 220. INSERT man INTO man1 INDEX 1. LOOP AT man1 INTO man. WRITE: / man-name,man-high,man-weight. ENDLOOP.2、读取文件
2.1、使用upload函数
*读放文件
DATA: BEGIN OF man, name(20) TYPE c, high TYPE p DECIMALS 2, weight TYPE p DECIMALS 2, END OF man. DATA: man1 LIKE TABLE OF man. CALL FUNCTION 'UPLOAD' EXPORTING codepage = 'test' filename = 'd:\temp\testa.txt' filetype = 'dat' item = '读取文件' TABLES data_tab = man1 EXCEPTIONS invalid_filesize = 1 invalid_table_width = 2 invalid_type = 3 no_batch = 4 unknown_error = 5 gui_refuse_filetransfer = 6 OTHERS = 7. IF sy-subrc <> 0. * message id sy-msgid type sy-msgty number sy-msgno * with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4. ENDIF. LOOP AT man1 INTO man. WRITE: / man-name,man-high,man-weight. ENDLOOP.2.2、使用WS_UPLOAD函数
*读取文件
DATA: BEGIN OF man,
name(20) TYPE c,
high TYPE p DECIMALS 2,
weight TYPE p DECIMALS 2,
END OF man.
DATA: man1 LIKE TABLE OF man.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
codepage = 'test'
filename = 'd:\temp\testa.txt'
filetype = 'DAT'
TABLES
data_tab = man1
EXCEPTIONS
invalid_filesize = 1
invalid_table_width = 2
invalid_type = 3
no_batch = 4
unknown_error = 5
gui_refuse_filetransfer = 6
OTHERS = 7.
IF sy-subrc <> 0.
* message id sy-msgid type sy-msgty number sy-msgno
* with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
LOOP AT man1 INTO man.
WRITE: / man-name,man-high,man-weight.
ENDLOOP.2.3、使用GUI_UPLOAD函数
*直接读取文件
DATA: BEGIN OF man,
name(20) TYPE c,
high TYPE p DECIMALS 2,
weight TYPE p DECIMALS 2,
END OF man.
DATA: man1 LIKE TABLE OF man.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = 'd:\temp\testa.txt'
FILETYPE = 'DAT'
* HAS_FIELD_SEPARATOR = ' '
* HEADER_LENGTH = 0
* READ_BY_LINE = 'X'
* DAT_MODE = ' '
* CODEPAGE = ' '
* IGNORE_CERR = ABAP_TRUE
* REPLACEMENT = '#'
* CHECK_BOM = ' '
* VIRUS_SCAN_PROFILE =
* NO_AUTH_CHECK = ' '
* IMPORTING
* FILELENGTH =
* HEADER =
tables
data_tab = man1
* CHANGING
* ISSCANPERFORMED = ' '
* EXCEPTIONS
* FILE_OPEN_ERROR = 1
* FILE_READ_ERROR = 2
* NO_BATCH = 3
* GUI_REFUSE_FILETRANSFER = 4
* INVALID_TYPE = 5
* NO_AUTHORITY = 6
* UNKNOWN_ERROR = 7
* BAD_DATA_FORMAT = 8
* HEADER_NOT_ALLOWED = 9
* SEPARATOR_NOT_ALLOWED = 10
* HEADER_TOO_LONG = 11
* UNKNOWN_DP_ERROR = 12
* ACCESS_DENIED = 13
* DP_OUT_OF_MEMORY = 14
* DISK_FULL = 15
* DP_TIMEOUT = 16
* OTHERS = 17
.
IF sy-subrc <> 0.
* Implement suitable error handling here
ENDIF.
LOOP AT man1 INTO man.
WRITE: / man-name,man-high,man-weight.
ENDLOOP.2.4、读取文件小例子
DATA file_table TYPE file_table. "引用FILE_TABLE对象
DATA: lt_file_names TYPE filetable,
lwa_file_name LIKE LINE OF lt_file_names,
lv_subrc TYPE i.
SELECT-OPTIONS: i_file FOR file_table NO INTERVALS.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR i_file-low.
CALL METHOD cl_gui_frontend_services=>file_open_dialog
EXPORTING
* WINDOW_TITLE =
* DEFAULT_EXTENSION =
* DEFAULT_FILENAME =
* FILE_FILTER =
initial_directory = 'd:\temp'
multiselection = 'X'
CHANGING
file_table = lt_file_names[]
rc = lv_subrc "打开文件的数量
* USER_ACTION =
EXCEPTIONS
file_open_dialog_failed = 1
cntl_error = 2
error_no_gui = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
i_file-sign = 'I'.
i_file-option = 'EQ'.
LOOP AT lt_file_names INTO lwa_file_name.
i_file-low = lwa_file_name.
APPEND i_file.
ENDLOOP.
START-OF-SELECTION.
WRITE:'打开文件的数量：',lv_subrc LEFT-JUSTIFIED.
WRITE: / '打开文件的数量：',LINES( i_file ) LEFT-JUSTIFIED.
LOOP AT i_file.
WRITE: / i_file-low.
ENDLOOP.3、保存文件
*保存文件
DATA: BEGIN OF man, name(20) TYPE c, high TYPE p DECIMALS 2, weight TYPE p DECIMALS 2, END OF man. DATA: man1 LIKE TABLE OF man. DATA: name TYPE rlgrap-filename, typa TYPE rlgrap-filetype. man-name = '张参'. man-high = '1.68'. man-weight = 120. INSERT man INTO TABLE man1. man-name = '刘志'. man-high = '1.78'. man-weight = 160. INSERT man INTO TABLE man1. man-name = '钱华'. man-high = '2.22'. man-weight = 220. INSERT man INTO man1 INDEX 2. name = 'd:\temp\testad.txt'. typa = 'dat'. CALL FUNCTION 'DOWNLOAD' EXPORTING codepage = 'testa' filename = name filetype = typa item = '文件测试' TABLES data_tab = man1 EXCEPTIONS invalid_filesize = 1 invalid_table_width = 2 invalid_type = 3 no_batch = 4 unknown_error = 5 gui_refuse_filetransfer =6 OTHERS = 7. IF sy-subrc <> 0. * message id sy-msgid type sy-msgty number sy-msgno * with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4. ENDIF.4、格式化输出
DATA wa LIKE spfli.
WRITE:/. WRITE:10'航班承运人',40'航班连接',60'国家代码',80'起飞城市',100'起飞机场'.5、内表排序
*内表排序
DATA: BEGIN OF man, name(20) TYPE c, high TYPE p DECIMALS 2, weight TYPE p DECIMALS 2, END OF man. DATA: man1 LIKE hashed TABLE OF man with unique key name. man-name = '张参'. man-high = '1.68'. man-weight = 120. INSERT man INTO TABLE man1. man-name = '刘志'. man-high = '1.78'. man-weight = 160. INSERT man INTO TABLE man1. man-name = '钱华'. man-high = '2.22'. man-weight = 220. INSERT man INTO table man1. LOOP AT man1 INTO man. WRITE: / man-name,man-high,man-weight. ENDLOOP. ULINE. sort man1 ascending by weight descending . skip. uline. LOOP AT man1 INTO man. WRITE: / man-name,man-high,man-weight. ENDLOOP.6、消息
*消息
*--开始 *DATA: msg1(20) TYPE c VALUE '测试'. *DATA: msg2(20) TYPE c VALUE 'ABAP'. *DATA: msg3(20) TYPE c VALUE '消息！'. * *MESSAGE i006(ymess) WITH msg1 msg2 msg3. * *data:BEGIN OF man, * name(30) TYPE c, * high TYPE p DECIMALS 2, * weight TYPE p DECIMALS 2, *END OF man. * *FIELD-SYMBOLS <fsa> LIKE man. *DATA man1 LIKE man. * *man-name = '雨荷'. *man-high = '1.78'. *man-weight = 140. * *ASSIGN man TO <fsa>. *WRITE:/ <fsa>-name, * man-high, *<fsa>-weight. *--结束 *--开始 *DATA: msg1(20) TYPE c VALUE '测试'. *DATA: msg2(20) TYPE c VALUE 'ABAP'. *DATA: msg3(20) TYPE c VALUE '消息！'. * *MESSAGE i001(00) WITH msg1 msg2 msg3. * * *DATA: c1(2) TYPE c, * c2(2) TYPE c, * c3(2) TYPE c, * c4(2) TYPE c, * c5(20) TYPE c VALUE '91* 12*23*344445', * c9(2) TYPE c. * *c9 = '* '. *WRITE: / . *WRITE c5. *SPLIT c5 AT c9 INTO c1 c2 c3 c4 . *WRITE: / c1,c2,c3,c4. *--结束 *--开始 *DATA: msg1(20) TYPE c VALUE '测试'. *DATA: msg2(20) TYPE c VALUE 'ABAP'. *DATA: msg3(20) TYPE c VALUE '消息！'. * *MESSAGE i001(00) WITH msg1 msg2 msg3. * * *DATA: BEGIN OF man, * name(20) TYPE c, * high TYPE p DECIMALS 2, * weight TYPE p DECIMALS 2, *END OF man. * *DATA: man1 LIKE TABLE OF man WITH HEADER LINE, *man2 LIKE TABLE OF man. * *man-name = '张参'. *man-high = '1.68'. *man-weight = 120. *APPEND man TO man1. * *man-name = '刘志'. *man-high = '1.78'. *man-weight = 160. *APPEND man TO man1. * *MOVE man1[] TO man2. * * * WRITE: / man-name,man-high,man-weight. * * *LOOP AT man1. *write: / man1-name,man1-high,man1-weight. *ENDLOOP. *--结束7、读取数据表
**读取数据表
*定义工作区
DATA a_spfli TYPE spfli.
*定义内表，请注意有Header line
DATA ta_spfli TYPE TABLE OF spfli WITH HEADER LINE.
*分隔线
ULINE.
WRITE / '使用工作区'.
ULINE.
* 将数据表逐行转移至工作区，只读前5行
SELECT * INTO CORRESPONDING FIELDS OF
a_spfli FROM spfli UP TO 5 ROWS.
WRITE: / a_spfli-connid,a_spfli-carrid,a_spfli-cityfrom,
a_spfli-cityto.
ENDSELECT.
ULINE.
WRITE / '使用内表'.
ULINE.
SELECT * INTO CORRESPONDING FIELDS OF
TABLE ta_spfli FROM spfli UP TO 5 ROWS.
*从数据表读数据至内表，直接从内表输出
*如果TA_SPFLI没有定义Header line，会出错
LOOP AT ta_spfli.
WRITE: / a_spfli-connid,a_spfli-carrid,a_spfli-cityfrom,
a_spfli-cityto.
ENDLOOP.
ULINE.
WRITE / '将内表数据转移至工作区'.
ULINE.
LOOP AT ta_spfli INTO a_spfli.
WRITE: / a_spfli-connid,a_spfli-carrid,a_spfli-cityfrom,
a_spfli-cityto.
ENDLOOP.
8、内连接和外连接
*内连接和外连接
*定义结构
DATA: BEGIN OF arcd,
carrid TYPE spfli-carrid,
connid TYPE spfli-connid,
fldate TYPE sflight-fldate,
END OF arcd.
*工作区
DATA arcd1 LIKE arcd.
*关联数据表，读取前10条记录，写入工作区，并输出
SELECT spfli~carrid spfli~connid sflight~fldate INTO arcd1 FROM spfli
INNER JOIN sflight ON spfli~carrid = sflight~carrid
AND spfli~connid = sflight~connid UP TO 10 ROWS.
WRITE: / arcd1-carrid,arcd1-connid,arcd1-fldate.
ENDSELECT.9、使用package size 读取数据
**使用package size 读取数据
*定义内表，请注意有Header line
DATA wa_spfli TYPE TABLE OF spfli WITH HEADER LINE.
*分隔线
ULINE.
* 以每次读取5条记录，直到读取所有数据
SELECT * INTO TABLE wa_spfli FROM spfli PACKAGE SIZE 5.
*输出内表记录
LOOP AT wa_spfli.
WRITE: / wa_spfli-connid,wa_spfli-carrid,wa_spfli-cityfrom,
wa_spfli-cityto.
ENDLOOP.
*输出5条记录后输出一条横线
ULINE.
ENDSELECT.10、交互式列表
**交互式列表
START-OF-SELECTION.
WRITE:'初如列表,sy-lsind = ' ,sy-lsind.
AT LINE-SELECTION.
IF sy-lsind = 1.
WRITE: '第二列表,sy-lsind =',sy-lsind.
ENDIF.
AT LINE-SELECTION.
IF sy-lsind = 2.
WRITE: '第三列表,sy-lsind =',sy-lsind.
ENDIF.11、列表颜色
**列表颜色
*数据库表spfli相关
TABLES spfli.
SKIP.
*输出表头，背景灰蓝
FORMAT COLOR COL_HEADING.
ULINE AT /(91).
WRITE: / sy-vline,(15) '航线承运人', sy-vline , (15) '航班连接', sy-vline,
(15) '国家代码', sy-vline,(15) '起飞城市', sy-vline,
(15) '起飞机场',sy-vline.
ULINE AT /(91).
FORMAT COLOR OFF.
*输出内容,输出关键值为‘LH’为红色
SELECT * FROM spfli.
IF spfli-carrid = 'LH'.
FORMAT COLOR COL_NEGATIVE.
ELSE.
FORMAT COLOR OFF.
ENDIF.
WRITE: / sy-vline,(15) spfli-carrid,sy-vline,(15) spfli-connid,sy-vline,
(15) spfli-countryto, sy-vline,(15) spfli-cityfrom,sy-vline,(15)
spfli-airpfrom,sy-vline.
ULINE AT /(91).
ENDSELECT.12、输出热点
**输出热点
start-of-selection.
write '请按'.
format hotspot on color 5 inverse on.
write '热点'.
format hotspot off color off.
at line-selection.
write 'welcome!'.13、为列表定义工具条和菜单
*为列表定义工具条和菜单
START-OF-SELECTION.
* 设置已使用的状态条
SET PF-STATUS 'STA1'.
WRITE:'测试工具条按钮 '.
AT USER-COMMAND.
*当单击按钮时输出
CASE sy-ucomm.
WHEN '&NFO'.
WRITE: '已选择!'.
WHEN 'E'.
leave to screen 0.
when others.
WRITE '1111'.
ENDCASE.14、在弹出式窗口中显示列表
*在弹出式窗口中显示列表
START-OF-SELECTION.
* 设置已使用的状态条
SET PF-STATUS 'STA1'.
WRITE:'测试工具条按钮 '.
AT USER-COMMAND.
*当单击按钮时输出
CASE sy-ucomm.
WHEN '&NFO'.
WRITE: '已选择!'.
WHEN 'E'.
leave to screen 0.
when others.
IF sy-lsind = 1.
SET PF-STATUS 'STA1'.
*定义子窗口并输出
WINDOW STARTING AT 10 10 ENDING AT 30 20.
WRITE '在子窗口输出!'.
WRITE: '请注意!'.
ENDIF.
ENDCASE.15、隐藏字段技术
**隐藏字段技术
*数据库表spfli相关
TABLES: spfli, sflight.
START-OF-SELECTION.
SKIP.
*输出
ULINE AT /(91).
WRITE: / sy-vline,(15) '航线承运人', sy-vline , (15) '航班连接', sy-vline,
(15) '国家代码', sy-vline,(15) '起飞城市', sy-vline,
(15) '起飞机场',sy-vline.
ULINE AT /(91).
*输出
SELECT * FROM spfli
* WHERE carrid = 'UA' AND connid = 3504
.
WRITE: / sy-vline,(15) spfli-carrid,sy-vline,
(15) spfli-connid,sy-vline,
(15) spfli-countryto,sy-vline,
(15) spfli-cityfrom,sy-vline,
(15) spfli-airpfrom, sy-vline.
*隐藏关键字
HIDE: spfli-carrid,spfli-connid.
ULINE AT /(91).
ENDSELECT.
AT LINE-SELECTION.
*只输出第一页
IF sy-lsind = 1.
write : / 'spfli-carrid：',spfli-carrid.
write : / 'spfli-connid：',spfli-connid.
ULINE AT /(91).
WRITE: / sy-vline,(15) '航线承运人', sy-vline , (15) '航班连接', sy-vline,
(15) '国家代码', sy-vline,(15) '起飞城市', sy-vline,
(15) '起飞机场',sy-vline.
ULINE AT /(91).
*根据隐藏字段读取并打印从表
SELECT * FROM sflight
WHERE carrid = spfli-carrid AND connid = spfli-connid
.
WRITE: / sy-vline,(15) spfli-carrid,sy-vline,
(15) spfli-connid,sy-vline,
(15) spfli-countryto,sy-vline,
(15) spfli-cityfrom,sy-vline,
(15) spfli-airpfrom, sy-vline.
ULINE AT /(91).
ENDSELECT.
ENDIF.16、使用hide技术从列表读取行
**使用hide技术从列表读取行
*数据库表spfli相关
TABLES: spfli.
DATA: sela(1) TYPE c,
num TYPE i VALUE 0.
START-OF-SELECTION.
SKIP.
*输出
ULINE AT /(95).
WRITE: / sy-vline,'',sy-vline,(15) '航线承运人', sy-vline , (15)
'航班连接', sy-vline,(15) '国家代码', sy-vline,(15)
'起飞城市', sy-vline,(15) '起飞机场',sy-vline.
ULINE AT /(95).
*输出
SELECT * FROM spfli.
WRITE: / sy-vline,sela AS CHECKBOX,sy-vline,(15) spfli-carrid,
sy-vline,(15) spfli-connid,sy-vline,(15) spfli-countryto,
sy-vline,(15) spfli-cityfrom,sy-vline,
(15) spfli-airpfrom,sy-vline.
* 隐藏关键字
HIDE: spfli-carrid,spfli-connid,spfli-countryto,
spfli-cityfrom,spfli-airpfrom.
ULINE AT /(95).
* 隐藏选择框，使表格行不会选择
HIDE sela.
num = num + 1.
ENDSELECT.
END-OF-SELECTION.
* num1 = sy-lsind - 1.
AT LINE-SELECTION.
WRITE : 'sy-lsind:',sy-lsind.
WRITE : 'num:',num.
*只输出第一页
IF sy-lsind = 1.
DO num TIMES.
* 读取行
READ LINE sy-index FIELD VALUE sela.
* 如果checked,输出隐含字段
IF sela = 'X'.
WRITE: / spfli-carrid,spfli-connid,spfli-countryto,
spfli-cityfrom,spfli-airpfrom.
ENDIF.
ENDDO.
ENDIF.
来源：oschina
链接：https://my.oschina.net/u/4387307/blog/3648514