问题
Looking for a boost::asio (and with himself boost) decided to write asynchronous server. To store incoming data I use boost::asio::streambuf. Here I have a problem. When I receive a second message from the client and subsequent I see that in the buffer contains a data from previous messages. Although I call Consume method at the input buffer. What's wrong?
class tcp_connection
// Using shared_ptr and enable_shared_from_this
// because we want to keep the tcp_connection object alive
// as long as there is an operation that refers to it.
: public boost::enable_shared_from_this<tcp_connection>
{
...
boost::asio::streambuf receive_buffer;
boost::asio::io_service::strand strand;
}
...
void tcp_connection::receive()
{
// Read the response status line. The response_ streambuf will
// automatically grow to accommodate the entire line. The growth may be
// limited by passing a maximum size to the streambuf constructor.
boost::asio::async_read_until(m_socket, receive_buffer, "\r\n",
strand.wrap(boost::bind(&tcp_connection::handle_receive, shared_from_this()/*this*/,
boost::asio::placeholders::error,
boost::asio::placeholders::bytes_transferred)));
}
void tcp_connection::handle_receive(const boost::system::error_code& error,
std::size_t bytes_transferred)
{
if (!error)
{
// process the data
/* boost::asio::async_read_until remarks
After a successful async_read_until operation,
the streambuf may contain additional data beyond the delimiter.
An application will typically leave that data in the streambuf for a
subsequent async_read_until operation to examine.
*/
/* didn't work
std::istream is(&receive_buffer);
std::string line;
std::getline(is, line);
*/
// clean up incomming buffer but it didn't work
receive_buffer.consume(bytes_transferred);
receive();
}
else if (error != boost::asio::error::operation_aborted)
{
std::cout << "Client Disconnected\n";
m_connection_manager.remove(shared_from_this());
}
}
回答1:
Either using a std::istream and reading from it, such as by std::getline(), or explicitly invoking boost::asio::streambuf::consume(n), will remove data from the input sequence.
If the application is performing either of these and subsequent read_until() operations results in duplicated data in receive_buffer's input sequence, then the duplicated data is likely originating from the remote peer. If the remote peer is writing to the socket and directly using a streambuf's input sequence, then the remote peer needs to explicitly invoke consume() after each successful write operation.
As noted in the documentation, successful read_until() operations may contain additional data beyond the delimiter, including additional delimiters. For instance, if "a@b@" is written to a socket, a read_until() operation using '@' as a delimiter may read and commit "a@b@" to the streambuf's input sequence. However, the operation will indicate that the amount of bytes transferred is that up to and including the first delimiter. Thus, bytes_transferred would be 2 and streambuf.size() would be 4. After 2 bytes have been consumed, the streambuf's input sequence would contain "b@", and a subsequent call to read_until() will return immediately, as the streambuf already contains the delimiter.
Here is a complete example demonstrating streambuf usage for reading and writing, and how the input sequence is consumed:
#include <iostream>
#include <boost/asio.hpp>
#include <boost/bind.hpp>
// This example is not interested in the handlers, so provide a noop function
// that will be passed to bind to meet the handler concept requirements.
void noop() {}
std::string make_string(boost::asio::streambuf& streambuf)
{
return {buffers_begin(streambuf.data()),
buffers_end(streambuf.data())};
}
int main()
{
using boost::asio::ip::tcp;
boost::asio::io_service io_service;
// Create all I/O objects.
tcp::acceptor acceptor(io_service, tcp::endpoint(tcp::v4(), 0));
tcp::socket server_socket(io_service);
tcp::socket client_socket(io_service);
// Connect client and server sockets.
acceptor.async_accept(server_socket, boost::bind(&noop));
client_socket.async_connect(acceptor.local_endpoint(), boost::bind(&noop));
io_service.run();
// Write to server.
boost::asio::streambuf write_buffer;
std::ostream output(&write_buffer);
output << "a@"
"b@";
write(server_socket, write_buffer.data());
std::cout << "Wrote: " << make_string(write_buffer) << std::endl;
assert(write_buffer.size() == 4); // Data not consumed.
// Read from the client.
boost::asio::streambuf read_buffer;
// Demonstrate consuming via istream.
{
std::cout << "Read" << std::endl;
auto bytes_transferred = read_until(client_socket, read_buffer, '@');
// Verify that the entire write_buffer (data pass the first delimiter) was
// read into read_buffer.
auto initial_size = read_buffer.size();
assert(initial_size == write_buffer.size());
// Read from the streambuf.
std::cout << "Read buffer contains: " << make_string(read_buffer)
<< std::endl;
std::istream input(&read_buffer);
std::string line;
getline(input, line, '@'); // Consumes from the streambuf.
assert("a" == line); // Note getline discards delimiter.
std::cout << "Read consumed: " << line << "@" << std::endl;
assert(read_buffer.size() == initial_size - bytes_transferred);
}
// Write an additional message to the server, but only consume 'a@'
// from write buffer. The buffer will contain 'b@c@'.
write_buffer.consume(2);
std::cout << "Consumed write buffer, it now contains: " <<
make_string(write_buffer) << std::endl;
assert(write_buffer.size() == 2);
output << "c@";
assert(write_buffer.size() == 4);
write(server_socket, write_buffer.data());
std::cout << "Wrote: " << make_string(write_buffer) << std::endl;
// Demonstrate explicitly consuming via the streambuf.
{
std::cout << "Read" << std::endl;
auto initial_size = read_buffer.size();
auto bytes_transferred = read_until(client_socket, read_buffer, '@');
// Verify that the read operation did not attempt to read data from
// the socket, as the streambuf already contained the delimiter.
assert(initial_size == read_buffer.size());
// Read from the streambuf.
std::cout << "Read buffer contains: " << make_string(read_buffer)
<< std::endl;
std::string line(
boost::asio::buffers_begin(read_buffer.data()),
boost::asio::buffers_begin(read_buffer.data()) + bytes_transferred);
assert("b@" == line);
assert(read_buffer.size() == initial_size); // Nothing consumed.
read_buffer.consume(bytes_transferred); // Explicitly consume.
std::cout << "Read consumed: " << line << std::endl;
assert(read_buffer.size() == 0);
}
// Read again.
{
std::cout << "Read" << std::endl;
read_until(client_socket, read_buffer, '@');
// Read from the streambuf.
std::cout << "Read buffer contains: " << make_string(read_buffer)
<< std::endl;
std::istream input(&read_buffer);
std::string line;
getline(input, line, '@'); // Consumes from the streambuf.
assert("b" == line); // Note "b" is expected and not "c".
std::cout << "Read consumed: " << line << "@" << std::endl;
std::cout << "Read buffer contains: " << make_string(read_buffer)
<< std::endl;
}
}
Output:
Wrote: a@b@
Read
Read buffer contains: a@b@
Read consumed: a@
Consumed write buffer, it now contains: b@
Wrote: b@c@
Read
Read buffer contains: b@
Read consumed: b@
Read
Read buffer contains: b@c@
Read consumed: b@
Read buffer contains: c@
来源：https://stackoverflow.com/questions/28478278/working-with-boostasiostreambuf