I'm trying out Valet, it looks really nice from what I've heard.
I've been trough the "whole" installation process, Valet is succesfully installed.
But when I cd into my projects file and enter valet park and browse to http://blog.dev, I get "The DNS server address of blog.dev can not be found."
I have no idea what I'm doing wrong. :)
When you run valet install it attempts to install dnsmasq. It requires sudo privileges.
You can check that it's installed and running using
brew services list
You should see something like
dnsmasq started root /Library/LaunchDaemons/homebrew.mxcl.dnsmasq.plist
You may however need to tap brew/services first
brew tap homebrew/services
If it's not there, run
brew install dnsmasq
brew services start dnsmasq
Run valet install again to set up dnsmasq and keep an eye out for any errors. What this should do is append a line to the bottom of /usr/local/etc/dnsmasq.conf similar to
conf-file=/Users/{YOURUSER}/.valet/dnsmasq.conf
/Users/{YOURUSER}/.valet/dnsmasq.conf then should contain
address=/.dev/127.0.0.1
Check that your dns server is responding to requests
dig testing.dev @127.0.0.1
You should see a response like
;; ANSWER SECTION:
testing.dev. 0 IN A 127.0.0.1
To actually ensure that your Mac knows that it should resolve *.dev using your local DNS server, it need to be told to do so. Valet also handles this for you but you can check if it's done it's job by doing the following.
Inside the directory /etc/resolver, there should be a file entitled dev with the following contents
nameserver 127.0.0.1
This creates a custom DNS resolver for *.dev and points all requests at your local DNS server.
Restart dnsmasq with either of the following commands and then give it a try again.
// this
brew services restart dnsmasq
// or this
sudo launchctl stop homebrew.mxcl.dnsmasq
sudo launchctl start homebrew.mxcl.dnsmasq
If this is all working, you should be able to ping anything.dev
ping anything.dev
PING anything.dev (127.0.0.1): 56 data bytes
64 bytes from 127.0.0.1: icmp_seq=0 ttl=64 time=0.039 ms
64 bytes from 127.0.0.1: icmp_seq=1 ttl=64 time=0.081 ms
That ensures the DNS related bits are working.
Ultimately the question is about DNS related problems but as this started off as a here's everything you need to have tried, I'll leave this below. That said, if you're unable to ping something.dev or get an error like "The DNS server address of blog.dev can not be found." as per the OP, it's something above to do with DNS which needs resolving.
Since Caddy serves websites on port 80, you need to ensure that nothing else is running on port 80.
sudo lsof -n -i:80 | grep LISTEN
Ideally this should return caddy if valet is running as expected. You want to see the example below or nothing ideally; nothing because it means we can just start Valet.
caddy 76234 root 3u IPv6 0x4f871f962e84fa95 0t0 TCP *:http (LISTEN)
You may see other webservers, such as Apache or Nginx (and their child processes, _www and nobody) in the example below.
httpd 79 root 4u IPv6 0xf4641199930063c5 0t0 TCP *:http (LISTEN)
httpd 239 _www 4u IPv6 0xf4641199930063c5 0t0 TCP *:http (LISTEN)
nginx 4837 root 6u IPv4 0xf4641199a4e8e915 0t0 TCP 127.0.0.1:http (LISTEN)
nginx 4838 nobody 6u IPv4 0xf4641199a4e8e915 0t0 TCP 127.0.0.1:http (LISTEN)
Assuming you've installed Nginx with homebrew you can run the following to stop it.
brew services stop nginx
OSX ships with Apache installed so you can stop with with the following if it's running.
sudo apachectl stop
At this point you can likely start Valet with valet start and it'll work.
You may get a further error which is caused by PHP being installed without FPM. You can check this using
brew info php70 | grep php70-fpm
Which should yield something along the lines of
The control script is located at /usr/local/opt/php70/sbin/php70-fpm
If it doesn't appear to be installed, use the following.
brew uninstall homebrew/php/php70
brew install homebrew/php/php70 --with-fpm
valet restart
I had the same problem - getting stuck at ping foobar.dev - and fixed it by restarting my Macbook (after valet install). I am sure this is not an exact solution and I reckon there is a way to do this without restarting. Yet, it worked for me. I did not have to do any other steps.
[Edit - Additionally, before restarting I made sure to try the installing with fpm tip, and to follow all brew's suggestions upon installing php70 (tweaking the path, making sure php70 starts on system start. I cannot say whether these things helped, so probably want to try just restarting, first. If it's really just a restart that's required, or some other additional step to properly start services, I think the laravel documentation probably needs some clarification.]
I had the same problem, post installation I got stuck at pinging foo.dev.
I checked for running services.
> brew services list
Name Status User Plist
dnsmasq stopped
nginx stopped
php71 stopped
Started all the three services manually with
> brew services start dnsmasq
> brew services start nginx
> brew services start php71
Ran valet install.
Ping successfully to foo.dev
If you are a Windows user, Perform the Acrylic Configuration then restart your adapter(Disable and Enable)
http://mayakron.altervista.org/wikibase/show.php?id=AcrylicWindows10Configuration
Worked For Me
来源：https://stackoverflow.com/questions/37172691/valet-laravel-dns-address-can-not-be-found