LVS+keepalived做Mysql集群的负载均衡

LVS+keepalived做Mysql集群的负载均衡：

注：
1、LVS本身不对node做健康检查的，所以要借助keepalived
2、根据配置当某node down掉会有几秒判断时间，这点请注意。

负载均衡端：

yum install ipvsadm keepalived ipset-devel

注：
keepalived的log在/var/log/message里

vi /etc/keepalived/keepalived.conf

! Configuration File for keepalived

global_defs {
notification_email {br/>aa@ming.com
}
notification_email_from aa@ming.com
smtp_server 10.0.0.10
smtp_connect_timeout 30
router_id LVS_DEVEL
vrrp_skip_check_adv_addr

vrrp_strict （这行一定要注掉，不注掉vip可能会ping不通）

vrrp_garp_interval 0
vrrp_gna_interval 0
}

vrrp_instance VI_1 {
state MASTER
interface eno1 （这里网卡名要写对）
virtual_router_id 51
priority 100
advert_int 3
authentication {
auth_type PASS
auth_pass 1111
}
virtual_ipaddress {
10.0.1.10
}
}

virtual_server 10.0.1.10 3306 {
delay_loop 6
lb_algo rr
lb_kind DR （此处需改为DR）
persistence_atimeout 10
protocol TCP

real_server 10.0.1.2 3306 {
    weight 1
    TCP_CHECK {
        connect_timeout 3
        nb_get_retry 3
        delay_before_retry 3
        connect_port 3306
    }

}

real_server 10.0.1.3 3306 {
    weight 1
    TCP_CHECK {
        connect_timeout 3
        retry 3
        delay_before_retry 1
        connect_port 3306
    }

}

real_server 10.0.1.4 3306 {
    weight 1
    TCP_CHECK {
        connect_timeout 3
        retry 3
        delay_before_retry 1
        connect_port 3306
    }

}

}

:wq

systemctl restart keepalived

systemctl enable keepalived

systemctl status keepalived

ip a （检查eno1是不是多了个10.0.1.10的vip，这个ip在ifconfig是看不到的，要确保可以ping通）

ipvsadm -L --stats （查看各node分配情况）

Mysql node端（所有node都做）：

ifconfig lo:0 10.0.1.10 netmask 255.255.255.255 broadcast 10.0.1.10

route add -host 10.0.1.10 dev lo:0

vi /etc/sysctl.conf

net.ipv4.conf.lo.arp_ignore = 1
net.ipv4.conf.lo.arp_announce = 2
net.ipv4.conf.all.arp_ignore = 1
net.ipv4.conf.all.arp_announce = 2

:wq

sysctl -p

ifconfig lo:0

route -n

验证（可以看到访问的为不同node）：

mysql -u aa -p'xxxx' -h 10.0.1.10 -e "select @@hostname;"

来源：oschina

链接：https://my.oschina.net/u/4299953/blog/4307501