前面我们介绍了Flash主要的几个寄存器，如果还有其他的疑问可以再返回去看看或者直接查阅S12系列单片机的手册中相关的内容。这一节我将介绍Flash控制器指令执行的过程，并举出相关的例子，希望能够起到举一反三的效果。
在手册中FCCOB寄存器下面，介绍了Flash寄存器执行指令的过程是这样的：
我们解释下：NVM执行指令时将通过FCCOB寄存器向存储控制器提供一个指令码还有其相关的参数，也就是说先根据指令码对FCCOB寄存器进行设置，然后通过对FSTAT寄存器中的CCIF位写入1从而使Flash控制器开始执行FCCOB中的指令（当向CCIF写1后，读取CCIF时其值将为0）。当用户向CCIF中写1后，FCCOB指令寄存器内的内容将被锁定直到此次指令执行结束。如果该指令码有返回值，则返回信息将会在FCCOB寄存器内。
我们稍微总结下Flash寄存器执行指令的过程：
1. 先通过调整FCCOBIX寄存器向FCCOB寄存器各个word中写入指令码与相关的参数
2. 向FSTAT的CCIF位中写入1，开始指令执行
3. 读取CCIF的值直到指令执行结束，若指令码有返回值则读取并返回（还有FSTAT中的其他位可能表示了写入过程中的错误信息）
这样就可以让Flashi控制器完成一次指令的执行了。下面我们看一下一个手册中的典型FCCOB寄存器的用法：
在上面的典型用法表中我们可以看到向Flash中写入8个Byte的过程应该如下方程序所示:
1 unsigned long address = 0x020000 //将要在Flash中写入的数据首地址(全局地址)
2 unsigned int *ptr = data // word长度的数据指针
3 byte i
4
5 // 读取CCIF的值来判断Flash
6 while ((FSTAT & FSTAT_CCIF_MASK) == 0);
7
8
9 // 按照格式要求选择0x00
10 FCCOBIX = 0x00; // choose the 000 FCCOB
11
12 /* 000 FCCOB HI is 8 bits commands and LO is physical address Highest byte*/
13 /* command 0x06 means program flash */
14 /* warning: before program, the area must be erased*/
15 FCCOB = 0x0600 | ((address & 0x00030000) >> 16);
16
17 FCCOBIX = 0x01; //choose the 001 FCCOB
18 /* 001 FCCOB is the least 16bits physical address*/
19 FCCOB = (address & 0x0000FFFF);
20
21 /* 0x02 - 0x05 FCCOB are 4x2 bytes write data*/
22 for (i = 2; i < 6; i++)
23 {
24 FCCOBIX = i;
25 FCCOB = *ptr; /* 2 bytes data each FCCOB */
26 ptr ++; /* next 2 bytes */
27 }
28
29 FSTAT = 0x80; /* set CCIF to clear CCIF and launch command */
30 while ((FSTAT & FSTAT_CCIF_MASK) == 0); /* wait command done */
31请仔细阅读上方的代码，在代码中我使用了向Flash中写入8个Byte的指令码0x06，完成的效果就是将上方表格所示的FCCOB中的内容设置满，然后启动并执行指令，直到指令被完全执行成功。
这里有四点需要强调，
首先是不同的指令码对应着FCCOB中不同的内容要求，具体设置情况根据需要，参照手册中对每个指令码的要求来编写。
其次是Flash的操作地址模式为全局地址，也就是上面表格中Global address，先把全局地址与分页地址的关系搞清楚了再做Flash的操作。
第三是Flash的擦写程序必须要复制到RAM中执行才可以执行，复制代码到RAM中执行前要在prm文件中使用RELOCATE_TO关键词，将代码拷贝至内存中运行（在bootloader详解教程中有写如何将ROM中的代码拷贝至RAM中），这是因为Flash的操作不能读写同步的，当Flash控制器在执行指令时，单片机无法从Flash读出指令，一定要先将Flash擦写的代码拷贝至RAM中运行才可以。
第四是，在写入Flash之前，务必要确定该片Flash区域已经被擦除了，否则会出现写入错误。
后面我还会展示一点代码，对于初学者，将下面的代码每一句都弄懂，对照着器件手册理解了，基本上Flash这部分内容就算是勉强出师了。其间涉及到了错误信息的处理，在手册里查一查都有的。
还想说一下本人写这个教程的初衷，因为首先自己搞的时候确实很头大，这样把过程写出来十分畅快，其次就是在下目前在下的环境，完全不参与什么行业竞争，这些只是需要读一读器件手册就能完成的事情，发出来对大家有用就好。下面贴代码，代码包括prm文件设置，Flash擦写头文件与实现，还有个将ROM中程序复制到RAM中运行的程序。要是根据我这个教程将Flash调通的，在教程下评论下吧，并不是要推荐，只是想看看帮到了多少人。
prm文件设置
1 NAMES END
2
3 SEGMENTS
4 /* Register space */
5 /* IO_SEG = PAGED 0x0000 TO 0x03FF; intentionally not defined */
6
7 /* RAM */
8 RAM = READ_WRITE 0x2000 TO 0x3BFF;
9 CODE_RAM = READ_WRITE 0x3C00 TO 0x3FFF; /*1 kB for flash read and write*/
10
11 /* D-Flash */
12 DFLASH = READ_ONLY 0x000400 TO 0x0013FF;
13
14 /* non-paged FLASHs */
15 ROM_1400 = READ_ONLY 0x1400 TO 0x1FFF;
16
17 ROM_BOOT = READ_ONLY 0x4000 TO 0x43FF; // 1KB for boot loader
18 ROM_FLASH = READ_ONLY 0X4400 TO 0x47FF RELOCATE_TO 0x3C00; // 1KB for necessary flash operation
19
20 ROM_C000 = READ_ONLY 0xC000 TO 0xFEFF;
21 /* VECTORS = READ_ONLY 0xFF00 TO 0xFFFF; intentionally not defined: used for VECTOR commands below */
22 //OSVECTORS = READ_ONLY 0xFF80 TO 0xFFFF; /* OSEK interrupt vectors (use your vector.o) */
23
24 /* paged FLASH: 0x8000 TO 0xBFFF; addressed through PPAGE */
25 PAGE_08 = READ_ONLY 0x088000 TO 0x08BFFF;
26 PAGE_09 = READ_ONLY 0x098000 TO 0x09BFFF;
27 PAGE_0A = READ_ONLY 0x0A8000 TO 0x0ABFFF;
28 PAGE_0B = READ_ONLY 0x0B8000 TO 0x0BBFFF;
29 PAGE_0C = READ_ONLY 0x0C8000 TO 0x0C93FF;
30 PAGE_0C_A000 = READ_ONLY 0x0CA000 TO 0x0CBFFF;
31 PAGE_0E = READ_ONLY 0x0E8000 TO 0x0EBFFF;
32 /* PAGE_0D = READ_ONLY 0x0D8000 TO 0x0DBFFF; not used: equivalent to ROM_4000 */
33 /* PAGE_0F = READ_ONLY 0x0F8000 TO 0x0FBEFF; not used: equivalent to ROM_C000 */
34 END
35
36 PLACEMENT /* here all predefined and user segments are placed into the SEGMENTS defined above. */
37 _PRESTART, /* Used in HIWARE format: jump to _Startup at the code start */
38 STARTUP, /* startup data structures */
39 ROM_VAR, /* constant variables */
40 STRINGS, /* string literals */
41 VIRTUAL_TABLE_SEGMENT, /* C++ virtual table segment */
42 //.ostext, /* OSEK */
43 NON_BANKED, /* runtime routines which must not be banked */
44 COPY /* copy down information: how to initialize variables */
45 /* in case you want to use ROM_4000 here as well, make sure
46 that all files (incl. library files) are compiled with the
47 option: -OnB=b */
48 INTO ROM_C000/*, ROM_1400, ROM_4000*/;
49
50 BOOTLOADER INTO ROM_BOOT;
51 FLASH_CODE INTO ROM_FLASH;
52
53
54 USER_APP INTO PAGE_08;
55 TEST_AREA INTO PAGE_09; /* physical address from 0x2_4000 */
56 DEFAULT_ROM INTO PAGE_0A, PAGE_0B, PAGE_0C, PAGE_0C_A000, PAGE_0E ;
57
58 //.stackstart, /* eventually used for OSEK kernel awareness: Main-Stack Start */
59 SSTACK, /* allocate stack first to avoid overwriting variables on overflow */
60 //.stackend, /* eventually used for OSEK kernel awareness: Main-Stack End */
61 DEFAULT_RAM INTO RAM;
62
63 //.vectors INTO OSVECTORS; /* OSEK */
64 END
65
66 ENTRIES /* keep the following unreferenced variables */
67 /* OSEK: always allocate the vector table and all dependent objects */
68 //_vectab OsBuildNumber _OsOrtiStackStart _OsOrtiStart
69 END
70
71 STACKSIZE 0x100
72
73 VECTOR 0 _Startup /* reset vector: this is the default entry point for a C/C++ application. */
74 //VECTOR 0 Entry /* reset vector: this is the default entry point for an Assembly application. */
75 //INIT Entry /* for assembly applications: that this is as well the initialization entry point */
76
77 VECTOR ADDRESS 0xFFD6 SCI0_INT_receiveFlash擦写头文件
1 #ifndef _FLASH_LIB_H
2 #define _FLASH_LIB_H
3
4 #include <mc9s12g128.h>
5
6 typedef enum
7 {
8 NoError = 0,
9 FlashProgramError = 1,
10 FlashEraseError = 2
11 } FlashMsg;
12
13 #pragma CODE_SEG BOOTLOASER
14
15 void Init_Flash(void);
16
17 #pragma CODE_SEG DEFAULT
18
19 #pragma CODE_SEG FLASH_CODE
20
21 FlashMsg Flash_Program(unsigned long address, unsigned int *ptr);
22
23 FlashMsg Flash_EraseSector(unsigned long address);
24
25
26 #pragma CODE_SEG DEFAULT
27
28 #endifFlash擦写实现
1 #include "FLASH_LIB.h"
2
3 /* a sector contains 512 bytes */
4 #define FLASH_SECTOR_SIZE 0x200
5
6
7 #pragma CODE_SEG BOOTLOASER
8
9 void Init_Flash(void)
10 {
11 // bus clock is 8MHz
12 // read the manual reference get the respective value
13
14 // check if the flash controller is busy or not
15 while ((FSTAT & FSTAT_CCIF_MASK) == 0);
16
17 // set the clock divider according to bus clock
18 FCLKDIV = 0x07;
19
20 // lock the divider
21 FCLKDIV_FDIVLCK = 1;
22
23 }
24
25 #pragma CODE_SEG DEFAULT
26
27
28 #pragma CODE_SEG FLASH_CODE
29
30 FlashMsg Flash_Program(unsigned long address, unsigned int *ptr)
31 {
32 byte i;
33
34 /*CCIF is the 7th bit of FSTAT
35 CCIF is 0, the flash controller is busy
36 wait until CCIF become 1*/
37 while ((FSTAT & FSTAT_CCIF_MASK) == 0);
38
39 /*clear ACCERR (flash access error) 5th bit
40 clear PVIOL (protection violation error) 4th bit
41 , or the CCIF cannot be cleared*/
42 FSTAT = 0x30;
43
44 /*write flash command, operation address and input parameters*/
45 FCCOBIX = 0x00; // choose the 000 FCCOB
46
47 /* 000 FCCOB HI is 8 bits commands and LO is physical address Highest byte*/
48 /* command 0x06 means program flash */
49 /* warning: before program, the area must be erased*/
50 FCCOB = 0x0600 | ((address & 0x00030000) >> 16);
51
52 FCCOBIX = 0x01; //choose the 001 FCCOB
53 /* 001 FCCOB is the least 16bits physical address*/
54 FCCOB = (address & 0x0000FFFF);
55
56 /* 0x02 - 0x05 FCCOB are 4x2 bytes write data*/
57 for (i = 2; i < 6; i++)
58 {
59 FCCOBIX = i;
60 FCCOB = *ptr; /* 2 bytes data each FCCOB */
61 ptr ++; /* next 2 bytes */
62 }
63
64 FSTAT = 0x80; /* set CCIF to clear CCIF and launch command */
65 while ((FSTAT & FSTAT_CCIF_MASK) == 0); /* wait command done */
66
67 /*read the error flag and return error message*/
68 if ((FSTAT & (FSTAT_ACCERR_MASK | FSTAT_FPVIOL_MASK)) != 0)
69 return FlashProgramError;
70 else
71 return NoError;
72
73 }
74
75 FlashMsg Flash_EraseSector(unsigned long address)
76 {
77 while ((FSTAT & FSTAT_CCIF_MASK) == 0);
78 FSTAT = 0x30;
79
80 /* command 0x0A means erased all address in the sector*/
81 FCCOBIX = 0x00;
82 FCCOB = 0x0A00 | ((address & 0x00030000) >> 16);
83
84 FCCOBIX = 0x01;
85 FCCOB = (address & 0x0000FFF8); /*get the sector*/
86
87 FSTAT = 0x80; /* launch command*/
88 while ((FSTAT & FSTAT_CCIF_MASK) == 0); /*wait for done*/
89
90 if ((FSTAT & (FSTAT_ACCERR_MASK | FSTAT_FPVIOL_MASK |
91 FSTAT_MGSTAT_MASK)) != 0)
92 return FlashEraseError;
93 else
94 return NoError;
95 }
96
97
98 #pragma CODE_SEG DEFAULTROM中内容复制到RAM中函数
void MoveCodeIntoRam(byte *source, byte *dest, unsigned int size)
{
while (size --)
{
*dest ++ = *source ++;
}
}对应本prm文件调用复制函数
MoveCodeIntoRam((byte *)0x4400, (byte *)0x3C00, 0x400);
本节内容小结：
1. 通过实例展示了S12系列单片机通过Flash指令寄存器让Flash控制器执行操作的过程
2. 给出了在擦写Flash的四个重要问题
3. 给出了可以调用的实例程序
注： 本系列文章均为原创，如有转载引用请标明来源
来源：oschina
链接：https://my.oschina.net/u/4390465/blog/4304628