问题
Is there a Windows command to convert line endings of a file?
We have a test.bat which we need to run to start our server. We use Perforce and we need to have unix line endings in our workspace. For some reason, we are not allowed to change line endings to Windows in our workspaces. However, the server runs on Windows.
Everytime I have to run the bat file, I open it in Notepad++ and choose Edit→EOL conversion→Windows. Is there a way to automate this so that we won\'t need to manually change the line endings everytime we sync with Perforce?
Thanks in advance.
回答1:
This can actually be done very easily using the more command which is included in Windows NT and later. To convert input_filename which contains UNIX EOL (End Of Line) \n to output_filename which contains Windows EOL \r\n, just do this:
TYPE input_filename | MORE /P > output_filename
The more command has additional formatting options that you may not be aware of. Run more/? to learn what else more can do.
回答2:
Use unix2dos utility. You can download binaries here.
回答3:
You can do this without additional tools in VBScript:
Do Until WScript.StdIn.AtEndOfStream
WScript.StdOut.WriteLine WScript.StdIn.ReadLine
Loop
Put the above lines in a file unix2dos.vbs and run it like this:
cscript //NoLogo unix2dos.vbs <C:\path\to\input.txt >C:\path\to\output.txt
or like this:
type C:\path\to\input.txt | cscript //NoLogo unix2dos.vbs >C:\path\to\output.txt
You can also do it in PowerShell:
(Get-Content "C:\path\to\input.txt") -replace "`n", "`r`n" |
Set-Content "C:\path\to\output.txt"
which could be further simplified to this:
(Get-Content "C:\path\to\input.txt") | Set-Content "C:\path\to\output.txt"
The above statement works without an explicit replacement, because Get-Content implicitly splits input files at any kind of linebreak (CR, LF, and CR-LF), and Set-Content joins the input array with Windows linebreaks (CR-LF) before writing it to a file.
回答4:
I was dealing with CRLF issues so I decided to build really simple tool for conversion (in NodeJS):
It's NodeJS EOL converter CLI
So if you have NodeJS with npm installed you can try it:
npm i -g eol-converter-cli
eolConverter crlf "**/*.{txt,js,java,etc}"
Path might be configured dynamically by using Glob regex (same regex as in shell).
So if you can use NodeJS, it's really simple and you can integrate this command to convert whole workspace to desired line endings.
回答5:
Windows' MORE is not reliable, it destroys TABs inevitably and adds lines.
unix2dos is part also of MinGW/MSYS, Cygutils, GnuWin32 and other unix binary port collections - and may already be installed.
When python is there, this one-liner converts any line endings to current platform - on any platform:
TYPE UNIXFILE.EXT | python -c "import sys; sys.stdout.write(sys.stdin.read())" > MYPLATFILE.EXT
or
python -c "import sys; sys.stdout.write(open(sys.argv[1]).read())" UNIXFILE.EXT > MYPLATFILE.EXT
Or put the one-liner into a .bat / shell script and on the PATH according to your platform:
@REM This is any2here.bat
python -c "import sys; sys.stdout.write(open(sys.argv[1]).read())" %1
and use that tool like
any2here UNIXFILE.EXT > MYPLATFILE.EXT
回答6:
Building on TampaHaze's and MD XF's helpful answers.
This will change all .txt files in place in the current directory from from LF to CRLF in Command Prompt
for /f %f in ('dir /b "*.txt"') do ( type %f | more /p > %f.1 & move %f.1 %f )
If you don't want to verify every single change
move
To
move /y
To include subdirectories change
dir /b
To
dir /b /s
To do all this in a batch file including subdirectories without prompting use below
@echo off
setlocal enabledelayedexpansion
for /f %%f in ('dir /s /b "*.txt"') do (
type %%f | more /p > %%f.1
move /y %%f.1 %%f > nul
@echo Changing LF-^>CRLF in File %%f
)
echo.
pause
回答7:
try this:
(for /f "delims=" %i in (file.unix) do @echo %i)>file.dos
Session protocol:
C:\TEST>xxd -g1 file.unix 0000000: 36 31 36 38 39 36 32 39 33 30 38 31 30 38 36 35 6168962930810865 0000010: 0a 34 38 36 38 39 37 34 36 33 32 36 31 38 31 39 .486897463261819 0000020: 37 0a 37 32 30 30 31 33 37 33 39 31 39 32 38 35 7.72001373919285 0000030: 34 37 0a 35 30 32 32 38 31 35 37 33 32 30 32 30 47.5022815732020 0000040: 35 32 34 0a 524. C:\TEST>(for /f "delims=" %i in (file.unix) do @echo %i)>file.dos C:\TEST>xxd -g1 file.dos 0000000: 36 31 36 38 39 36 32 39 33 30 38 31 30 38 36 35 6168962930810865 0000010: 0d 0a 34 38 36 38 39 37 34 36 33 32 36 31 38 31 ..48689746326181 0000020: 39 37 0d 0a 37 32 30 30 31 33 37 33 39 31 39 32 97..720013739192 0000030: 38 35 34 37 0d 0a 35 30 32 32 38 31 35 37 33 32 8547..5022815732 0000040: 30 32 30 35 32 34 0d 0a 020524..
回答8:
My contribution for this, converting several files in a folder:
for %%z in (*.txt) do (for /f "delims=" %%i in (%%z) do @echo %%i)>%%z.tmp
回答9:
You could create a simple batch script to do this for you:
TYPE %1 | MORE /P >%1.1
MOVE %1.1 %1
Then run <batch script name> <FILE> and <FILE> will be instantly converted to DOS line endings.
回答10:
Based on Endoro's answer but to keep the blanks, try this:
@echo off
setlocal enabledelayedexpansion
(for /f "tokens=* delims=:" %%i in ('findstr /n "^" file.unix') do (
set line=%%i
set line=!line:*:=!
echo(!line!
))>file.dos
回答11:
I cloned my git project using the git bash on windows. All the files then had LF endings. Our repository has CRLF endings as default.
I deleted the project, and then cloned it again using the Windows Command Prompt. The CRLF endings were intact then. In my case, if I had changed the endings for the project, then it would've resulted in a huge commit and would've caused trouble for my teammates. So, did it this way. Hope this helps somebody.
回答12:
I'm taking an AWS course and have frequently had to copy from text boxes in the AWS web forms to Windows Notepad. So I get the LF-delimited text only on my clipboard. I accidentally discovered that pasting it into my Delphi editor, and then hitting Ctrl+K+W will write the text to a file with CR+LF delimiters. (I'll bet many other IDE editors would do the same).
回答13:
For convert UNIX(LF) to Windows(CR-LF) use next command
type file.txt > new_file.txt
回答14:
If you have bash (e.g. git bash), you can use the following script to convert from unix2dos:
ex filename.ext <<EOF
:set fileformat=dos
:wq
EOF
similarly, to convert from dos2unix:
ex filename.ext <<EOF
:set fileformat=unix
:wq
EOF
回答15:
Inserting Carriage Returns to a Text File
@echo off
set SourceFile=%1 rem c:\test\test.txt
set TargetFile=%2 rem c:\test\out.txt
if exist "%TargetFile%" del "%TargetFile%"
for /F "delims=" %%a in ('type "%SourceFile%"') do call :Sub %%a
rem notepad "%TargetFile%"
goto :eof
:Sub
echo %1 >> "%TargetFile%"
if "%2"=="" goto :eof
shift
goto sub
来源：https://stackoverflow.com/questions/17579553/windows-command-to-convert-unix-line-endings