1.Android系统中定义了如下一些灯
/frameworks/android_hardware/libhardware/include/hardware/lights.h
#define LIGHT_ID_BACKLIGHT "backlight"
#define LIGHT_ID_KEYBOARD "keyboard"
#define LIGHT_ID_BUTTONS "buttons"
#define LIGHT_ID_BATTERY "battery"
#define LIGHT_ID_NOTIFICATIONS "notifications"
#define LIGHT_ID_ATTENTION "attention"
还有两个未实现的：
#define LIGHT_ID_BLUETOOTH "bluetooth"
#define LIGHT_ID_WIFI "wifi"2.编写lights的hal文件
好的参考例子，sony手机使用的，移植这个程序: https://android.googlesource.com/device/sony/lt26/+/master/liblight/lights.c
移植后的hal文件如下：
/*
移植:
https://android.googlesource.com/device/sony/lt26/+/master/liblight/lights.c
*/
/*是在发布版软件中的ALOGV()能打印出来*/
#define LOG_NDEBUG 0
#define LOG_TAG "lights"
#include <cutils/log.h>
#include <stdint.h>
#include <string.h>
#include <unistd.h>
#include <errno.h>
#include <fcntl.h>
#include <pthread.h>
#include <sys/ioctl.h>
#include <sys/types.h>
#include <hardware/lights.h>
char const*const RED_LED_FILE = "/sys/class/leds/led1/brightness";
char const*const GREEN_LED_FILE = "/sys/class/leds/led2/brightness";
char const*const BLUE_LED_FILE = "/sys/class/leds/led3/brightness";
char const*const RED_LED_FILE_TRIGGER = "/sys/class/leds/led1/trigger";
char const*const GREEN_LED_FILE_TRIGGER = "/sys/class/leds/led2/trigger";
char const*const BLUE_LED_FILE_TRIGGER = "/sys/class/leds/led3/trigger";
char const*const RED_LED_FILE_DELAYON = "/sys/class/leds/led1/delay_on";
char const*const GREEN_LED_FILE_DELAYON = "/sys/class/leds/led2/delay_on";
char const*const BLUE_LED_FILE_DELAYON = "/sys/class/leds/led3/delay_on";
char const*const RED_LED_FILE_DELAYOFF = "/sys/class/leds/led1/delay_off";
char const*const GREEN_LED_FILE_DELAYOFF = "/sys/class/leds/led2/delay_off";
char const*const BLUE_LED_FILE_DELAYOFF = "/sys/class/leds/led3/delay_off";
char const*const LCD_BACKLIGHT_FILE = "/dev/backlight-1wire";
/* Synchronization primities */
static pthread_once_t g_init = PTHREAD_ONCE_INIT;
static pthread_mutex_t g_lock = PTHREAD_MUTEX_INITIALIZER;
/* Mini-led state machine */
static struct light_state_t g_notification;
static struct light_state_t g_battery;
static int write_int (const char *path, int value) {
int fd;
/*使用这个静态变量只提示一次*/
static int already_warned = 0;
fd = open(path, O_RDWR);
if (fd < 0) {
int errno_ret = errno;
if (already_warned == 0) {
ALOGE("write_int open %s failed，ret=%d\n", path, fd);
already_warned = 1;
}
return -errno_ret;
}
char buffer[20];
/*sysfs文件写入的是字符串，因此还需要将数值转换为字符串后写入*/
int bytes = snprintf(buffer, sizeof(buffer), "%d\n", value);
int written = write (fd, buffer, bytes);
close(fd);
return written == -1 ? -errno : 0;
}
static int write_string (const char *path, const char *value) {
int fd;
static int already_warned = 0;
fd = open(path, O_RDWR);
if (fd < 0) {
int errno_ret = errno;
if (already_warned == 0) {
ALOGE("write_string failed to open %s\n", path);
already_warned = 1;
}
return -errno_ret;
}
char buffer[20];
int bytes = snprintf(buffer, sizeof(buffer), "%s\n", value);
int written = write (fd, buffer, bytes);
close(fd);
return written == -1 ? -errno : 0;
}
/* Color tools */
static int is_lit (struct light_state_t const* state) {
return state->color & 0x00ffffff;
}
static int rgb_to_brightness (struct light_state_t const* state) {
int color = state->color & 0x00ffffff;
return ((77*((color>>16)&0x00ff))
+ (150*((color>>8)&0x00ff)) + (29*(color&0x00ff))) >> 8;
}
/* The actual lights controlling section */
static int set_light_backlight (struct light_device_t *dev, struct light_state_t const *state) {
int brightness = rgb_to_brightness(state);
ALOGV("%s brightness=%d color=0x%08x", __func__,brightness, state->color);
/*加个锁表示希望是线程安全的*/
pthread_mutex_lock(&g_lock);
/* App传下来brightness 0-255，但是驱动只支持0-127，因此除以2 */
write_int (LCD_BACKLIGHT_FILE, brightness/2);
pthread_mutex_unlock(&g_lock);
return 0;
}
/*这个实验中的三个灯模拟的是一个灯*/
static void set_shared_light_locked (struct light_device_t *dev, struct light_state_t *state) {
int r, g, b;
int delayOn,delayOff;
r = (state->color >> 16) & 0xFF;
g = (state->color >> 8) & 0xFF;
b = (state->color) & 0xFF;
delayOn = state->flashOnMS;
delayOff = state->flashOffMS;
/*需要led闪烁，三个led全部闪烁*/
if (state->flashMode != LIGHT_FLASH_NONE) {
write_string (RED_LED_FILE_TRIGGER, "timer");
write_string (GREEN_LED_FILE_TRIGGER, "timer");
write_string (BLUE_LED_FILE_TRIGGER, "timer");
write_int (RED_LED_FILE_DELAYON, delayOn);
write_int (GREEN_LED_FILE_DELAYON, delayOn);
write_int (BLUE_LED_FILE_DELAYON, delayOn);
write_int (RED_LED_FILE_DELAYOFF, delayOff);
write_int (GREEN_LED_FILE_DELAYOFF, delayOff);
write_int (BLUE_LED_FILE_DELAYOFF, delayOff);
} else {
write_string (RED_LED_FILE_TRIGGER, "none");
write_string (GREEN_LED_FILE_TRIGGER, "none");
write_string (BLUE_LED_FILE_TRIGGER, "none");
}
/*虽然上面同时触发了闪烁，但是如果写的是0，会关闭对应的led*/
write_int (RED_LED_FILE, r);
write_int (GREEN_LED_FILE, g);
write_int (BLUE_LED_FILE, b);
}
/*sony的通知灯和电池灯共用一个led,通知灯的优先级更高*/
static void handle_shared_battery_locked (struct light_device_t *dev) {
/*优先作为通知灯使用*/
if (is_lit (&g_notification)) {
set_shared_light_locked (dev, &g_notification);
} else {
set_shared_light_locked (dev, &g_battery);
}
}
static int set_light_battery (struct light_device_t *dev, struct light_state_t const* state) {
ALOGV("%s flashMode=%d onMS = %d offMS = %d color=0x%08x", __func__,state->flashMode,state->flashOnMS,state->flashOffMS,state->color);
pthread_mutex_lock (&g_lock);
g_battery = *state;
handle_shared_battery_locked(dev);
pthread_mutex_unlock (&g_lock);
return 0;
}
static int set_light_notifications (struct light_device_t *dev, struct light_state_t const* state) {
ALOGV("%s flashMode=%d onMS = %d offMS = %d color=0x%08x", __func__,state->flashMode,state->flashOnMS,state->flashOffMS,state->color);
pthread_mutex_lock (&g_lock);
g_notification = *state;
handle_shared_battery_locked(dev);
pthread_mutex_unlock (&g_lock);
return 0;
}
/* Initializations */
void init_globals () {
pthread_mutex_init (&g_lock, NULL);
}
/* Glueing boilerplate */
static int close_lights (struct light_device_t *dev) {
if (dev)
free(dev);
return 0;
}
/*这个参数可能被传入多个name,获取多个name的led*/
static int open_lights (const struct hw_module_t* module, char const* name,
struct hw_device_t** device) {
int (*set_light)(struct light_device_t* dev,
struct light_state_t const *state);
/*若获取的是"backlight"灯，就返回"backlight"灯的设置方法*/
if (0 == strcmp(LIGHT_ID_BACKLIGHT, name)) {
set_light = set_light_backlight;
}/*若获取的是"battery"灯，就返回"battery"灯的设置方法*/
else if (0 == strcmp(LIGHT_ID_BATTERY, name)) {
set_light = set_light_battery;
}/*若获取的是"notifications"灯，就返回"notifications"灯的设置方法*/
else if (0 == strcmp(LIGHT_ID_NOTIFICATIONS, name)) {
set_light = set_light_notifications;
}/*其它灯不支持*/
else {
/*没获取到帮JNI设置为NULL*/
*device = NULL;
return -EINVAL;
}
/*
* 这句确保只执行一次，对于hal文件这个技术和有用，因为可能要支持多线程，而且只需要执行一次.
* 此处使用静态变量效率应该还高一些。
*/
pthread_once (&g_init, init_globals);
struct light_device_t *dev = malloc(sizeof (struct light_device_t));
memset(dev, 0, sizeof(*dev));
dev->common.tag = HARDWARE_DEVICE_TAG;
dev->common.version = 0;
dev->common.module = (struct hw_module_t*)module;
dev->common.close = (int (*)(struct hw_device_t*))close_lights;
dev->set_light = set_light; /*这个是对应灯的设置方法*/
/*这个结构体返回给JNI*/
*device = (struct hw_device_t*)dev;
return 0;
}
static struct hw_module_methods_t lights_module_methods = {
.open = open_lights,
};
struct hw_module_t HAL_MODULE_INFO_SYM = {
.tag = HARDWARE_MODULE_TAG,
.version_major = 1,
.version_minor = 0,
.id = LIGHTS_HARDWARE_MODULE_ID, /*"lights"*/
.name = "Transplant from Sony lights module",
.author = "Freedom Mr.Sun",
.methods = &lights_module_methods,
};然后放在hardware/libhardware/modules/lights/下，移植Android.mk进行编译。
同时还要把系统原有的那个不开源的lights.tiny4412.so从系统中移除：
vi vendor/friendly-arm/tiny4412/device-tiny4412.mk
ifeq ($(BOARD_USES_PWMLIGHTS),false)
# 注释掉这两行
# PRODUCT_COPY_FILES += \
# $(VENDOR_PATH)/proprietary/lights.tiny4412.so:system/lib/hw/lights.tiny4412.so
endif3.编译遇到问题一：
编译进system.img里面的lights.tiny4412.so还是这个不开源的，不是我们实现的，但是
out/target/product/tiny4412/system/lib/hw/lights.tiny4412.so已经是我们实现的了。此时删除out/target/product/tiny4412/system.img
和顶层目录下的system.img,然后重新make snod, ./gen-img.sh，然后生成的system.img里面就是使用我们自己实现的hal了。
4.遇到问题二：
hal文件中的ALOGV()的打印并没有打印出来，在/system/.../cutil/log.h中有说明在发布版软件中ALOGV()的打印是会被丢弃的，若不被想
丢在源文件的最上面加：#define LOG_NDEBUG 0
因此不重要的信息尽量使用ALOGV()来打印，这样软件在release版本中会自动去除。
5.遇到问题三：
/sys/class/leds/led1/trigger无法使用open(O_RDWR)打开，原因是权限不够，Android和Linux不同，Android是以普通用户登录的，属性
文件制定644权限是不可写的，因此需要将trigger，brightness，delay_off，delay_on中需要写的设置为0666权限。
6.mmm -B 强制编译，没有修改代码但是要重新编译的时候使用
7.tiny4412上调节背光的操作：
Setting --> Display --> Brightness Level -->可以手动调节背光的亮度
8.LCD背光灯调节
tiny4412操作LCD背光，这个4412厂家没有给出源码，只给出了一个.so的库,源文件在vendor/friendly-arm/tiny4412/proprietary/lights.tiny4412.so
文件系统中在/system/lib/hw/lights.tiny4412.so。
若是不知道这个库操作的是哪个设备文件，可以把这个库反汇编出来，然后看它操作了哪些设备文件。
其实也不用反汇编，使用AltraEdit打开它然后查找，选择ASCII,搜索/dev，发现其打开的设备文件是/dev/backlight-1wire
在tiny4412上果然有/dev/backlight-1wire，对应内核中文件为tiny4412_1wire_host.c，由其write()看出只需要向里面写个整数值就能调整
背光，测试：
shell@tiny4412:/system # echo 127 > /dev/backlight-1wire //背光开到最大
shell@tiny4412:/system # echo 0 > /dev/backlight-1wire //关闭背光
shell@tiny4412:/system # echo 10 > /dev/backlight-1wire //调节背光
会自动把"127"转换为127
来源：oschina
链接：https://my.oschina.net/u/4413564/blog/3550050