kvm虚拟机的克隆分为两种情况，本文也就通过以下两种情况进行克隆，克隆虚拟机为OEL5.8X64。
本文出自：http://koumm.blog.51cto.com
(1) KVM主机本机虚拟机直接克隆。
(2) 通过复制配置文件与磁盘文件的虚拟机复制克隆(适用于异机的静态迁移)。
1. 本机虚拟机直接克隆
(1) 查看虚拟机配置文件
[root@node1 ~]# cat /etc/libvirt/qemu/oeltest01.xml
虚拟机磁盘文件: /data/test01.img
虚拟机名称：oeltest01
(2) 开始克隆
# virt-clone -o oeltest01 -n oeltest02 -f /data/test02.img
说明：以oeltest01做为源，克隆oeltest01虚拟机，并创建名称为oeltest02虚拟机，使用磁盘文件/data/test02.img
(3) 启动虚拟机并配置主机名，IP地址等
[root@node1 data]# virsh console oeltest02
kvm控制台配置请见kvm虚拟化学习笔记(六)之kvm虚拟机控制台登录配置。
(4) 修改主机名，IP地址等
# vi /etc/hosts
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 test02 localhost.localdomain localhost
::1 localhost6.localdomain6 localhost6
# vi /etc/sysconfig/network
NETWORKING=yes
NETWORKING_IPV6=no
HOSTNAME=test02
GATEWAY=192.168.233.2
修改IP地址
# vi /etc/sysconfig/network-script/ifcfg-eth0
# Virtio Network Device
DEVICE=eth0
BOOTPROTO=static
ONBOOT=yes
HWADDR=52:54:00:56:bd:2b
IPADDR=192.168.233.142
NETMASK=255.255.255.0
[root@test01 ~]# service network restart
Shutting down interface eth0: [ OK ]
Shutting down loopback interface: [ OK ]
Bringing up loopback interface: [ OK ]
Bringing up interface eth0: [ OK ]
[root@test01 ~]#
2. 复制配置文件与磁盘文件克隆
(1) 导入kvm虚拟机配置文件
这里采用oeltest01做为模板，进行克隆。
# virsh shutdown oeltest01
# virsh dumpxml oeltest01 > /etc/libvirt/qemu/oeltest03.xml
(2) 复制kvm虚拟机磁盘文件
本系列文章都是采用虚拟磁盘文件进行测试，没有使用lvm卷。
通过查看配置文件：虚拟磁盘位置<source file='/data/test01.img'/>
(3) 直接编辑修改配置文件
修改name,uuid,disk位置,vnc端口
此时还是将该配置文件注册进来，无法通过virsh edit进行编辑。
[root@node1 data]# vi /etc/libvirt/qemu/oeltest03.xml
<domain type='kvm'>
<name>oeltest03</name>
<uuid>8f2bb4a7-c7ed-32aa-3676-9fb05923260d</uuid>
<memory unit='KiB'>524288</memory>
<currentMemory unit='KiB'>524288</currentMemory>
<vcpu placement='static'>1</vcpu>
<os>
<type arch='x86_64' machine='rhel6.4.0'>hvm</type>
<boot dev='hd'/>
</os>
<features>
<acpi/>
<apic/>
<pae/>
</features>
<clock offset='utc'/>
<on_poweroff>destroy</on_poweroff>
<on_reboot>restart</on_reboot>
<on_crash>restart</on_crash>
<devices>
<emulator>/usr/libexec/qemu-kvm</emulator>
<disk type='file' device='disk'>
<driver name='qemu' type='raw' cache='none'/>
<source file='/data/test03.img'/>
<target dev='hda' bus='ide'/>
<address type='drive' controller='0' bus='0' target='0' unit='0'/>
</disk>
<disk type='block' device='cdrom'>
<driver name='qemu' type='raw'/>
<target dev='hdc' bus='ide'/>
<readonly/>
<address type='drive' controller='0' bus='1' target='0' unit='0'/>
</disk>
<controller type='usb' index='0'>
<address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x2'/>
</controller>
<controller type='ide' index='0'>
<address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/>
</controller>
<interface type='bridge'>
<mac address='52:54:00:82:39:01'/>
<source bridge='br0'/>
<model type='virtio'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/>
</interface>
<serial type='pty'>
<target port='0'/>
</serial>
<console type='pty'>
<target type='serial' port='0'/>
</console>
<input type='tablet' bus='usb'/>
<input type='mouse' bus='ps2'/>
<graphics type='vnc' port='5911' autoport='no' listen='0.0.0.0'>
<listen type='address' address='0.0.0.0'/>
</graphics>
<video>
<model type='cirrus' vram='9216' heads='1'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/>
</video>
<memballoon model='virtio'>
<address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/>
</memballoon>
</devices>
</domain>
(4) 定义新虚拟机配置文件
[root@node1 data]# virsh define /etc/libvirt/qemu/oeltest03.xml 
启动虚拟机
[root@node1 data]# virsh start oeltest03
域 oeltest03 已开始
(5) 登录虚拟机进行主机名，IP等修改
[root@node1 data]# virsh console oeltest03
连接到域 oeltest03
Escape character is ^]
Oracle Linux Server release 5.8
Kernel 2.6.18-308.el5 on an x86_64
test01 login: mtrr: type mismatch for f0000000,100000 old: uncachable new: write-combining
mtrr: type mismatch for f0000000,400000 old: uncachable new: write-combining
Oracle Linux Server release 5.8
Kernel 2.6.18-308.el5 on an x86_64
test01 login: root
Password:
Last login: Sat Sep 7 05:21:11 on ttyS0
[root@test01 ~]#
[root@test01 ~]#
修改主机名
# vi /etc/hosts
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 test03 localhost.localdomain localhost
::1 localhost6.localdomain6 localhost6
# vi /etc/sysconfig/network
NETWORKING=yes
NETWORKING_IPV6=no
HOSTNAME=test03
GATEWAY=192.168.233.2
修改IP地址
# vi /etc/sysconfig/network-script/ifcfg-eth0
# Virtio Network Device
DEVICE=eth0
BOOTPROTO=static
ONBOOT=yes
HWADDR=52:54:00:56:bd:3b
IPADDR=192.168.233.143
NETMASK=255.255.255.0
service network restart
Shutting down interface eth0: [ OK ]
Shutting down loopback interface: [ OK ]
Bringing up loopback interface: [ OK ]
Bringing up interface eth0: [ OK ]
本文到此通过两种方式进行kvm虚拟机克隆，其实各有用处。
再次说明：本文克隆的虚拟机是oel5.8,如果克隆的虚拟机是RHEL/CentOS/OEL6.x操作系统，还需要修改/etc/udev/rules.d/70-persistent-net.rules文件。
来源：https://www.cnblogs.com/pigdragon/p/9505618.html