问题
Note: This is a similar question to my previous question on the topic, which was left partly unsolved and after which the nature of the challenge changed considerably: How to configure Vue CLI 4 with ESLint + Prettier + Airbnb rules + TypeScript + Vetur?
In 2019 I was fairly obsessed by getting a 'holy grail' tooling setup configured with Vue in TypeScript and having VS Code to autofix your code on file save in .vue, .ts, and .scss files.
But getting Prettier to work optimally with ESLint and Vetur ended up being too much of a challenge. Because of an inherent clash with Prettier and ESLint having partly the same aim and similar rule checks, and with Vetur adding more complexity to this particular mix in VS Code.
Also when the setup was mostly working, it was rather irritating that you needed to save the file several times in a row. Because once ESLint found and fixed a set of errors, new errors appeared and it was not advanced enough to run those checks and fixes in a row until all was cleared...
In November 2019 I was attending Vue Conf Toronto, and in Mr. Evan's workshop Deep Dive with Vue 3.0 I got to ask him about this problem. He told that the official tooling is going to see major overhauling pretty soon, and there will be new features coming in from newer versions of ESLint...
He also hinted that at this point there is autofix logic written to nearly all of Vue's official Style Guide's rule checks, which in combination with the upcoming Vue 3.0 fully modular architecture may even see an official VS Code extension coming. Or at least is making it easier for Vetur and similar plugins to run code checks and fixes by leveraging these new capabilities.
In December 2019, Vue CLI 4.1 plugins and presets upgrades brought ESLint version 6 features on the table. Which meant we could start using ESLint not just as a linter, but also a formatter, effectively dropping the need for Prettier in our setups.
During the same time ESLint released version 2 of it's official VS Code extension dbaeumer.vscode-eslint, bringing in support for VS Code's Run Code Actions on save -feature, controlled by editor.codeActionsOnSave -setting.
So finally the path was cleared for getting this setup running! Next up, I'll answer my own question on how to configure this mix.
PS. While it's possible Vetur could still be used as a part of this setup, here I've changed to using Stylelint. There has still been some problems with Stylelint's autofix feature, but is likely to be solved by future updates. Yet I'm still interested in hearing if Vetur would prove useful with or without Stylelint!
回答1:
Official scaffolded Vue CLI project's configurations
After Vue CLI 4.2 upgrades in create project scaffolding in February 2020, you are half way through the configurations by creating a new project with global vue create myproject command and making at least these selections (configurations included below):
Vue CLI v4.2.2
? Please pick a preset: Manually select features
? Check the features needed for your project:
(*) Babel
(*) TypeScript
( ) Progressive Web App (PWA) Support
( ) Router
( ) Vuex
(*) CSS Pre-processors
>(*) Linter / Formatter
( ) Unit Testing
( ) E2E Testing
? Use Babel alongside TypeScript (required for modern mode, auto-detected polyfills, transpiling JSX)? (Y/n) Y
? Pick a CSS pre-processor (PostCSS, Autoprefixer and CSS Modules are supported by default):
Sass/SCSS (with dart-sass)
> Sass/SCSS (with node-sass)
Less
Stylus
? Pick a linter / formatter config:
ESLint with error prevention only
> ESLint + Airbnb config
ESLint + Standard config
ESLint + Prettier
TSLint (deprecated)
? Pick additional lint features: (Press <space> to select, <a> to toggle all, <i> to invert selection)
>(*) Lint on save
( ) Lint and fix on commit
? Where do you prefer placing config for Babel, ESLint, etc.? (Use arrow keys)
> In dedicated config files
In package.json
Now you may be wondering why I chose node-sass over the first suggested option dart-sass − here's why: Vue CLI CSS pre-processor option: dart-sass VS node-sass?
In package.json you are given at least these dependencies:
"dependencies": {
"core-js": "^3.6.4",
"vue": "^2.6.11"
},
"devDependencies": {
"@typescript-eslint/eslint-plugin": "^2.18.0",
"@typescript-eslint/parser": "^2.18.0",
"@vue/cli-plugin-babel": "~4.2.0",
"@vue/cli-plugin-eslint": "~4.2.0",
"@vue/cli-plugin-typescript": "~4.2.0",
"@vue/cli-service": "~4.2.0",
"@vue/eslint-config-airbnb": "^5.0.2",
"@vue/eslint-config-typescript": "^5.0.1",
"eslint": "^6.7.2",
"eslint-plugin-import": "^2.20.1",
"eslint-plugin-vue": "^6.1.2",
"node-sass": "^4.12.0",
"sass-loader": "^8.0.2",
"typescript": "~3.7.5",
"vue-template-compiler": "^2.6.11"
}
With .eslintrc.js:
module.exports = {
root: true,
env: {
node: true,
},
extends: [
'plugin:vue/essential',
'@vue/airbnb',
'@vue/typescript/recommended',
],
parserOptions: {
ecmaVersion: 2020,
},
rules: {
'no-console': process.env.NODE_ENV === 'production' ? 'error' : 'off',
'no-debugger': process.env.NODE_ENV === 'production' ? 'error' : 'off',
},
};
With .editorconfig:
[*.{js,jsx,ts,tsx,vue}]
indent_style = space
indent_size = 2
end_of_line = lf
trim_trailing_whitespace = true
insert_final_newline = true
max_line_length = 100
Biased config changes for linting and formatting
So, with my biased modifications to .eslintrc.js:
module.exports = {
root: true,
env: {
node: true,
},
extends: [
'plugin:vue/recommended',
'@vue/airbnb',
'@vue/typescript/recommended',
],
parserOptions: {
ecmaVersion: 2020,
},
rules: {
'class-methods-use-this': 0,
// Changing max row length from 80 to 150.
// Remember to change in .editorconfig also, although am not sure if that file is even needed?
// Especially as scaffolding gave 100 as max len while ESLint default is 80...
'max-len': [
'error',
{
code: 150,
ignoreComments: true,
ignoreUrls: true,
},
],
'no-console': process.env.NODE_ENV === 'production' ? 'error' : 'off',
'no-debugger': process.env.NODE_ENV === 'production' ? 'error' : 'off',
'@typescript-eslint/ban-ts-ignore': 0,
},
// These are added if you chose also to install Jest plugin for Vue CLI
// With my own modifications here as an example
overrides: [
{
files: [
'./src/**/__tests__/*.spec.{j,t}s',
'./src/**/__mock__/*.{j,t}s',
],
env: {
jest: true,
},
rules: {
'no-unused-expressions': 0,
},
},
],
};
Then I've added .eslintignore file:
# Lint config files in the root ending .js
!/*.js
Then I've added this section in top of .editorconfig (while not sure if this file is needed):
# EditorConfig is awesome: https://EditorConfig.org
# top-most EditorConfig file
root = true
Installing and configuring Stylelint
Stylelint is a somewhat similar project to CSS/SCSS/SASS/LESS/Stylus than ESLint is for JavaScript/TypeScript, being likewise extendable with plugins and presets. It has an official VS Code extension, and it can also be run during your Webpack build process.
I've chosen to extend Stylelint with stylelint-scss package, which currently has half a million of weekly downloads, and stylelint-config-recommended-scss package from the same maintainer. In addition, I've configured stylelint-webpack-plugin as a part of the Webpack build process.
Install these dev dependencies from the command line by: npm i -D stylelint stylelint-config-recommended-scss stylelint-scss stylelint-webpack-plugin
Add a file .stylelintrc.json with a few biased rule modifications as an example (Vue's ::v-deep custom selector handling may come needed):
{
"extends": "stylelint-config-recommended-scss",
"rules": {
"max-nesting-depth": 4,
"no-descending-specificity": null,
"property-no-unknown": [
true,
{
"ignoreProperties": ["user-drag", "font-smooth"]
}
],
"selector-pseudo-element-no-unknown": [
true,
{
"ignorePseudoElements": ["v-deep"]
}
]
}
}
Create file or add to vue.config.js, this some biased config examples:
// Add in the top of the file
const StyleLintPlugin = require('stylelint-webpack-plugin');
module.exports = {
css: {
loaderOptions: {
sass: {
// Here as example if needed:
// Import Sass vars and mixins for SFC's style blocks
prependData: '@import "@/assets/styles/abstracts/_variables.scss"; @import "@/assets/styles/abstracts/_mixins.scss";',
},
},
},
lintOnSave: process.env.NODE_ENV !== 'production',
productionSourceMap: false,
devServer: {
overlay: {
warnings: true,
errors: true,
},
},
configureWebpack: {
// Fast source maps in dev
devtool: process.env.NODE_ENV === 'production' ? false : 'cheap-eval-source-map',
plugins: [
new StyleLintPlugin({
files: 'src/**/*.{vue,scss}',
}),
],
resolve: {
alias: {
// Alias @ to /src folder for ES/TS imports
'@': path.join(__dirname, '/src'),
},
},
},
};
VS Code editor, extensions and settings
Create .vscode named folder in your project root for placing project specific settings and extension recommendations. Note that if you open VS Code in workspace mode (having multiple project roots included at once), some of the settings do not work in this mode, so I'm always opening the project root directly without using workspace mode.
In this folder add a file extensions.json, with at least this content recommended, and install the extensions.
{
"recommendations": [
// ESLint - Integrates ESLint JavaScript into VS Code.
"dbaeumer.vscode-eslint",
// Disable eslint rule - Disable eslint rule with one click.
"wooodhead.disable-eslint-rule",
// eslint-disable-snippets - Simple snippets for disable eslint rules
"drknoxy.eslint-disable-snippets",
// Vue - Syntax highlight for Vue.js
"jcbuisson.vue",
// stylelint - Modern CSS/SCSS/Less linter
"stylelint.vscode-stylelint",
// EditorConfig for VS Code - EditorConfig Support for Visual Studio Code
// Not sure if this is needed or recommended,
// but .editorconfig file is still included in the scaffolded project...
"editorconfig.editorconfig",
// DotENV - Support for dotenv file syntax.
"mikestead.dotenv",
]
}
Add another file settings.json with these or similar settings:
{
// EDITOR
// ----------------------------------------
"editor.defaultFormatter": "dbaeumer.vscode-eslint",
"[javascript]": { "editor.defaultFormatter": "dbaeumer.vscode-eslint" },
"[typescript]": { "editor.defaultFormatter": "dbaeumer.vscode-eslint" },
"[vue]": { "editor.defaultFormatter": "dbaeumer.vscode-eslint" },
"[scss]": { "editor.defaultFormatter": "stylelint.vscode-stylelint" },
"[css]": { "editor.defaultFormatter": "stylelint.vscode-stylelint" },
"editor.codeActionsOnSave": {
// https://github.com/microsoft/vscode-eslint/blob/master/README.md#release-notes
"source.fixAll.eslint": true,
"source.fixAll.stylelint": true
},
// ESLINT
// ----------------------------------------
"eslint.enable": true,
"eslint.alwaysShowStatus": true,
"eslint.options": {
"extensions": [".html", ".js", ".ts", ".vue"]
},
// VETUR
// Disable rules if user has extension installed and enabled.
// ----------------------------------------
"vetur.validation.template": false,
"vetur.validation.style": false,
"vetur.format.defaultFormatter.html": "none",
"vetur.format.defaultFormatter.css": "none",
"vetur.format.defaultFormatter.scss": "none",
"vetur.format.defaultFormatter.js": "none",
"vetur.format.defaultFormatter.ts": "none",
// STYLELINT
// ----------------------------------------
"stylelint.enable": true,
"css.validate": true,
"scss.validate": true,
// HTML
// ----------------------------------------
"html.format.enable": false,
"emmet.triggerExpansionOnTab": true,
"emmet.includeLanguages": {
"vue-html": "html"
},
// FILES
// ----------------------------------------
"files.exclude": {
"**/*.log": true,
"**/*.log*": true,
"**/dist": true,
},
"files.associations": {
".babelrc": "jsonc",
".eslintrc": "jsonc",
".markdownlintrc": "jsonc",
"*.config.js": "javascript",
"*.spec.js": "javascript",
"*.vue": "vue"
},
// The default end of line character. Use \n for LF and \r\n for CRLF.
"files.eol": "\n",
"files.insertFinalNewline": true,
"files.trimFinalNewlines": true,
"files.trimTrailingWhitespace": true,
}
So these were my biased project settings, and I'm interested in hearing improvement suggestions!
来源：https://stackoverflow.com/questions/60187885/how-to-configure-vue-cli-4-with-eslint-airbnb-rules-typescript-stylelint-f