arduino寻找IIC（I2c）设备地址

arduino寻找IIC（I2c）设备地址

寻找IIC设备地址
官方地址
官方地址：i2c_scanner（http://playground.arduino.cc/Main/I2cScanner）

示例： 可参考我的另外一篇博客Arduino实践（二）lcd1602 把模块按接线方法接好，上传这段代码后，打开端口监视器，就能找到在I2C上的设备地址.

#include <Wire.h>

void setup() {
  Wire.begin();
  Serial.begin(9600);
  Serial.println("\nI2C Scanner");
}

void loop() {
  byte error, address;
  int nDevices;
  Serial.println("Scanning...");
  nDevices = 0;
  for (address = 1; address < 127; address++ ) {
    // The i2c_scanner uses the return value of
    // the Write.endTransmisstion to see if
    // a device did acknowledge to the address.
    Wire.beginTransmission(address);
    error = Wire.endTransmission();
    if (error == 0) {
      Serial.print("I2C device found at address 0x");
      if (address < 16)
        Serial.print("0");
      Serial.print(address, HEX);
      Serial.println(" !");
      nDevices++;
    } else if (error == 4) {
      Serial.print("Unknow error at address 0x");
      if (address < 16)
        Serial.print("0");
      Serial.println(address, HEX);
    }
  }
  if (nDevices == 0)
    Serial.println("No I2C devices found\n");
  else
    Serial.println("done\n");
  delay(5000); // wait 5 seconds for next scan
}```

来源：CSDN

作者：GuanFuXinCSDN

链接：https://blog.csdn.net/GuanFuXinCSDN/article/details/104157163