问题
As most of you know, email is very insecure. Even with a SSL-secured connection between the client and the server that sends an email, the message itself will be in plaintext while it hops around nodes across the Internet, leaving it vulnerable to eavesdropping.
Another consideration is the sender might not want the message to be readable - even by the intended recipient - after some time or after it's been read once. There are a number of reasons for this; for example, the message might contain sensitive information that can be requested through a subpoena.
A solution (the most common one, I believe) is to send the message to a trusted third party, and a link to the that message to the recipient, who then reads this message from the 3rd party. Or the sender can send an encrypted message (using symmetric encryption) to the recipient and send the key to the 3rd party.
Either way, there is a fundamental problem with this approach: if this 3rd party is compromised, all your efforts will be rendered useless. For a real example of an incident like this, refer to debacles involving Crypto AG colluding with the NSA
Another solution I've seen was Vanish, which encrypts the message, splits the key into pieces and "stores" the pieces in a DHT (namely the Vuze DHT). These values can be easily and somewhat reliably accessed by simply looking the hashes up (the hashes are sent with the message). After 8 hours, these values are lost, and even the intended recipient won't be able to read the message. With millions of nodes, there is no single point of failure. But this was also broken by mounting a Sybil attack on the DHT (refer to the Vanish webpage for more information).
So does anyone have ideas on how to accomplish this?
EDIT: I guess I didn't make myself clear. The main concern is not the recipient intentionally keeping the message (I know this one is impossible to control), but the message being available somewhere.
For example, in the Enron debacle, the courts subpoenaed them for all the email on their servers. Had the messages been encrypted and the keys lost forever, it would do them no good to have encrypted messages and no keys.
回答1:
(Disclaimer: I didn't read details on Vanish or the Sybil attack, which may be similar the what comes below)
First of all: Email messages are generally quite small, esp. compared to a 50 mb youtube vid you can download 10 times a day or more. On this I base the assumption that storage and bandwidth are not a real concern here.
Encryption, in the common sense of the word, introduces parts into your system that are hard to understand, and therefore hard to verify. (think of the typical openssl magic everybody just performs, but 99% of people really understand; if some step X on a HOWTO would say "now go to site X and upload *.cer *.pem and *.csr" to verify steps 1 to X-1, I guess 1 in 10 people will just do it)
Combining the two observations, my suggestion for a safe(*) and understandable system:
Say you have a message M of 10 kb. Take N times 10 kb from /dev/(u)random, possibly from hardware based random sources, call it K(0) to K(N-1). Use a simple xor operation to calculate
K(N) = M^K(0)^K(1)^...^K(N-1)
now, by definition
M = K(0)^K(1)^...^K(N)
i.e. to understand the message you need all K's. Store the K's with N different (more or less trusted) parties, using whatever protocol you fancy, under random 256 bit names.
To send a message, send the N links to the K's.
To destroy a message, make sure at least one K is deleted.
(*) as regards to safety, the system will be as safe as the safest party hosting a K.
Don't take a fixed N, don't have a fixed number of K's on a single node per message (i.e. put 0-10 K's of one message on the same node) to make a brute force attack hard, even for those who have access to all nodes storing keys.
NB: this of course would require some additional software, as would any solution, but the complexity of the plugins/tools required is minimal.
回答2:
The self-destructing part is really hard, because the user can take a screenshot and store the screenshot unencrypted on his disk, etc. So I think you have no chance to enforce that (there will always be a way, even if you link to an external page). But you can however simply ask the recipient to delete it afterwards.
The encryption is on the other hand is not a problem at all. I wouldn't rely on TLS because even when the sender and the client are using it, there might other mail relies who don't and they might store the message as plain text. So, the best way would be to simple encrypt it explicitly.
For example I am using GnuPG for (nearly) all mails I write, which is based on some asymmetric encryption methods. Here I know that only those I have given explicitly permission can read the mail, and since there are plug-ins available for nearly all popular MUAs, I'ts also quite easy for the recipient to read the mail. (So, nobody has to encrypt the mail manually and might forgot to delete the unencrypted message from the disk...). And it's also possible to revoke the keys, if someone has stolen your private key for example (which is normally encrypted anyway).
In my opinion, GnuPG (or alternatively S/MIME) should be used all the time, because that would also help to make spamming more difficult. But thats probably just one of my silly dreams ;)
回答3:
There are so many different ways of going about it which all have good and bad points, you just need to choose the right one for your scenario. I think the best way of going about it is the same as your 'most common' solution. The trusted third party should really be you - you create a website of your own, with your own authentication being used. Then you don't have to give your hypothetical keys to anyone.
You could use a two way certification method by creating your own client software which can read the emails, with the user having their own certificate. Better be safe than sorry!
回答4:
If the recipient knows that the message might become unreadable later and they find the message valuable their intention will be to preserve it, so they will try to subvert the protection.
Once someone has seen the message unencrypted - which means in any perceivable form - either as text or as screen image - they can store it somehow and do whatever they want. All the measures with keys and so one only make dealing with the message inconvenient, but don't prevent extracting the text.
One of the ways could be to use self-destructing hardware as in Mission Impossible - the hardware would display the message and then destroy it, but as you can see it is inconvenient as well - the recipient would need to understand the message from viewing it only once which is not always possible.
So given the fact that the recipient might be interested in subverting the protection and the protection can be subverted the whole idea will likely not work as intended but surely will make dealing with messages less convenient.
回答5:
If HTML format is used, you can have the message reference assets that you can remove at a later date. If the message is open at a later date, the user should see broken links..
回答6:
If your environment allows for it, you could use the trusted boot environment to ensure that a trusted boot loader has been used to boot a trusted kernel, which could verify that a trusted email client is being used to receive the email before sending it. See remote attestation.
It would be the responsibility of the email client to responsibly delete the email in a timely fashion -- perhaps relying on in-memory store only and requesting memory that cannot be swapped to disk.
Of course, bugs can happen in programs, but this mechanism could ensure there is no intentional pathway towards storing the email.
回答7:
The problem, as you describe it, does sound very close to the problem addressed by Vanish, and discussed at length in their paper. As you note, their first implementation was found to have a weakness, but it appears to be an implementation weakness rather than a fundamental one, and is therefore probably fixable.
Vanish is also sufficiently well-known that it's an obvious target for attack, which means that weaknesses in it have a good chance of being found, publicised, and fixed.
Your best option, therefore, is probably to wait for Vanish version 2. With security software, rolling your own is almost never a good idea, and getting something from an established academic security group is a lot safer.
回答8:
IMO, the most practical solution for the situation is using Pidgin IM client with Off-the-Record (no-logging) and pidgin-encrypt (end-to-end assymetric-encryption) together. The message will be destroyed as soon as the chat window is closed, and in emergency, you can just unplug the computer to close the chat window.
来源：https://stackoverflow.com/questions/3146847/how-could-one-design-a-secure-and-self-destructing-email