问题
Boost.Signals allows various strategies of using the return values of slots to form the return value of the signal. E.g. adding them, forming a vector out of them, or returning the last one.
The common wisdom (expressed in the Qt documentation [EDIT: as well as some answers to this question ]) is that no such thing is possible with Qt signals.
However, when I run the moc on the following class definition:
class Object : public QObject {
Q_OBJECT
public:
explicit Object( QObject * parent=0 )
: QObject( parent ) {}
public Q_SLOTS:
void voidSlot();
int intSlot();
Q_SIGNALS:
void voidSignal();
int intSignal();
};
Not only doesn't moc complain about the signal with the non-void return type, it seems to actively implement it in such a way as to allow a return value to pass:
// SIGNAL 1
int Object::intSignal()
{
int _t0;
void *_a[] = { const_cast<void*>(reinterpret_cast<const void*>(&_t0)) };
QMetaObject::activate(this, &staticMetaObject, 1, _a);
return _t0;
}
So: according to the docs, this thing isn't possible. Then what is moc doing here?
Slots can have return values, so can we connect a slot with a return value to a signal with a return value now? May that be possible, after all? If so, is it useful?
EDIT: I'm not asking for workarounds, so please don't provide any.
EDIT: It obviously isn't useful in Qt::QueuedConnection mode (neither is the QPrintPreviewWidget API, though, and still it exists and is useful). But what about Qt::DirectConnection and Qt::BlockingQueuedConnection (or Qt::AutoConnection, when it resolves to Qt::DirectConnection).
回答1:
OK. So, I did a little more investigating. Seems this is possible. I was able to emit a signal, and receive value from the slot the signal was connected to. But, the problem was that it only returned the last return value from the multiple connected slots:
Here's a simple class definition (main.cpp):
#include <QObject>
#include <QDebug>
class TestClass : public QObject
{
Q_OBJECT
public:
TestClass();
Q_SIGNALS:
QString testSignal();
public Q_SLOTS:
QString testSlot1() {
return QLatin1String("testSlot1");
}
QString testSlot2() {
return QLatin1String("testSlot2");
}
};
TestClass::TestClass() {
connect(this, SIGNAL(testSignal()), this, SLOT(testSlot1()));
connect(this, SIGNAL(testSignal()), this, SLOT(testSlot2()));
QString a = emit testSignal();
qDebug() << a;
}
int main() {
TestClass a;
}
#include "main.moc"
When main runs, it constructs one of the test classes. The constructor wires up two slots to the testSignal signal, and then emits the signal. It captures the return value from the slot(s) invoked.
Unfortunately, you only get the last return value. If you evaluate the code above, you'll get: "testSlot2", the last return value from the connected slots of the signal.
Here's why. Qt Signals are a syntax sugared interface to the signaling pattern. Slots are the recipients of a signal. In a direct connected signal-slot relationship, you could think of it similar to (pseudo-code):
foreach slot in connectedSlotsForSignal(signal):
value = invoke slot with parameters from signal
return value
Obviously the moc does a little more to help in this process (rudimentary type checking, etc), but this helps paint the picture.
回答2:
No, they can't.
Boost::signals are quite different from those in Qt. The former provide an advanced callback mechanism, whereas the latter implement the signaling idiom. In the context of multithreading, Qt's (cross-threaded) signals depend on message queues, so they are called asynchronously at some (unknown to the emitter's thread) point in time.
回答3:
Qt's qt_metacall function returns an integer status code. Because of this, I believe this makes an actual return value impossible (unless you fudge around with the meta object system and moc files after precompilation).
You do, however, have normal function parameters at your disposal. It should be possible to modify your code in such a way to use "out" parameters that act as your "return".
void ClassObj::method(return_type * return_)
{
...
if(return_) *return_ = ...;
}
// somewhere else in the code...
return_type ret;
emit this->method(&ret);
回答4:
You may get a return value from Qt signal with the following code:
My example shows how to use a Qt signal to read the text of a QLineEdit.
I'm just extending what @jordan has proposed:
It should be possible to modify your code in such a way to use "out" parameters that act as your "return".
#include <QtCore>
#include <QtGui>
class SignalsRet : public QObject
{
Q_OBJECT
public:
SignalsRet()
{
connect(this, SIGNAL(Get(QString*)), SLOT(GetCurrentThread(QString*)), Qt::DirectConnection);
connect(this, SIGNAL(GetFromAnotherThread(QString*)), SLOT(ReadObject(QString*)), Qt::BlockingQueuedConnection);
edit.setText("This is a test");
}
public slots:
QString call()
{
QString text;
emit Get(&text);
return text;
}
signals:
void Get(QString *value);
void GetFromAnotherThread(QString *value);
private slots:
void GetCurrentThread(QString *value)
{
QThread *thread = QThread::currentThread();
QThread *mainthread = this->thread();
if(thread == mainthread) //Signal called from the same thread that SignalsRet class was living
ReadObject(value);
else //Signal called from another thread
emit GetFromAnotherThread(value);
}
void ReadObject(QString *value)
{
QString text = edit.text();
*value = text;
}
private:
QLineEdit edit;
};
To use this, just request call();.
回答5:
You can try to workaround this with following:
- All your connected slots must save their results in some place (container) accessible from signaling object
- The last connected slot should somehow (select max or last value) process collected values and expose the only one
- The emitting object can try to access this result
Just as an idea.
来源：https://stackoverflow.com/questions/5842124/can-qt-signals-return-a-value