问题
I just found Apache POI library very useful for editing Word files using Java. Specifically, I want to edit a DOCX file using Apache POI's XWPF classes. I found no proper method / documentation following which I could do this. Can somebody please explain in steps, how to replace some text in a DOCX file.
** The text may be in a line / paragraph or in a table row/column
Thanks in Advance :)
回答1:
The method you need is XWPFRun.setText(String). Simply work your way through the file until you find the XWPFRun of interest, work out what you want the new text to be, and replace it. (A run is a sequence of text with the same formatting)
You should be able to do something like:
XWPFDocument doc = new XWPFDocument(OPCPackage.open("input.docx"));
for (XWPFParagraph p : doc.getParagraphs()) {
List<XWPFRun> runs = p.getRuns();
if (runs != null) {
for (XWPFRun r : runs) {
String text = r.getText(0);
if (text != null && text.contains("needle")) {
text = text.replace("needle", "haystack");
r.setText(text, 0);
}
}
}
}
for (XWPFTable tbl : doc.getTables()) {
for (XWPFTableRow row : tbl.getRows()) {
for (XWPFTableCell cell : row.getTableCells()) {
for (XWPFParagraph p : cell.getParagraphs()) {
for (XWPFRun r : p.getRuns()) {
String text = r.getText(0);
if (text != null && text.contains("needle")) {
text = text.replace("needle", "haystack");
r.setText(text,0);
}
}
}
}
}
}
doc.write(new FileOutputStream("output.docx"));
回答2:
Here is what we did for text replacement using Apache POI. We found that it was not worth the hassle and simpler to replace the text of an entire XWPFParagraph instead of a run. A run can be randomly split in the middle of a word as Microsoft Word is in charge of where runs are created within the paragraph of a document. Therefore the text you might be searching for could be half in one run and half in another. Using the full text of a paragraph, removing its existing runs, and adding a new run with the adjusted text seems to solve the problem of text replacement.
However there is a cost of doing the replacement at the paragraph level; you lose the formatting of the runs in that paragraph. For example if in the middle of your paragraph you had bolded the word "bits", and then when parsing the file you replaced the word "bits" with "bytes", the word "bytes" would no longer be bolded. Because the bolding was stored with a run that was removed when the paragraph's entire body of text was replaced. The attached code has a commented out section that was working for replacement of text at the run level if you need it.
It should also be noted that the below works if the text you are inserting contains \n return characters. We could not find a way to insert returns without creating a run for each section prior to the return and marking the run addCarriageReturn(). Cheers
package com.healthpartners.hcss.client.external.word.replacement;
import java.util.List;
import org.apache.commons.lang.StringUtils;
import org.apache.poi.xwpf.usermodel.XWPFDocument;
import org.apache.poi.xwpf.usermodel.XWPFParagraph;
import org.apache.poi.xwpf.usermodel.XWPFRun;
public class TextReplacer {
private String searchValue;
private String replacement;
public TextReplacer(String searchValue, String replacement) {
this.searchValue = searchValue;
this.replacement = replacement;
}
public void replace(XWPFDocument document) {
List<XWPFParagraph> paragraphs = document.getParagraphs();
for (XWPFParagraph xwpfParagraph : paragraphs) {
replace(xwpfParagraph);
}
}
private void replace(XWPFParagraph paragraph) {
if (hasReplaceableItem(paragraph.getText())) {
String replacedText = StringUtils.replace(paragraph.getText(), searchValue, replacement);
removeAllRuns(paragraph);
insertReplacementRuns(paragraph, replacedText);
}
}
private void insertReplacementRuns(XWPFParagraph paragraph, String replacedText) {
String[] replacementTextSplitOnCarriageReturn = StringUtils.split(replacedText, "\n");
for (int j = 0; j < replacementTextSplitOnCarriageReturn.length; j++) {
String part = replacementTextSplitOnCarriageReturn[j];
XWPFRun newRun = paragraph.insertNewRun(j);
newRun.setText(part);
if (j+1 < replacementTextSplitOnCarriageReturn.length) {
newRun.addCarriageReturn();
}
}
}
private void removeAllRuns(XWPFParagraph paragraph) {
int size = paragraph.getRuns().size();
for (int i = 0; i < size; i++) {
paragraph.removeRun(0);
}
}
private boolean hasReplaceableItem(String runText) {
return StringUtils.contains(runText, searchValue);
}
//REVISIT The below can be removed if Michele tests and approved the above less versatile replacement version
// private void replace(XWPFParagraph paragraph) {
// for (int i = 0; i < paragraph.getRuns().size() ; i++) {
// i = replace(paragraph, i);
// }
// }
// private int replace(XWPFParagraph paragraph, int i) {
// XWPFRun run = paragraph.getRuns().get(i);
//
// String runText = run.getText(0);
//
// if (hasReplaceableItem(runText)) {
// return replace(paragraph, i, run);
// }
//
// return i;
// }
// private int replace(XWPFParagraph paragraph, int i, XWPFRun run) {
// String runText = run.getCTR().getTArray(0).getStringValue();
//
// String beforeSuperLong = StringUtils.substring(runText, 0, runText.indexOf(searchValue));
//
// String[] replacementTextSplitOnCarriageReturn = StringUtils.split(replacement, "\n");
//
// String afterSuperLong = StringUtils.substring(runText, runText.indexOf(searchValue) + searchValue.length());
//
// Counter counter = new Counter(i);
//
// insertNewRun(paragraph, run, counter, beforeSuperLong);
//
// for (int j = 0; j < replacementTextSplitOnCarriageReturn.length; j++) {
// String part = replacementTextSplitOnCarriageReturn[j];
//
// XWPFRun newRun = insertNewRun(paragraph, run, counter, part);
//
// if (j+1 < replacementTextSplitOnCarriageReturn.length) {
// newRun.addCarriageReturn();
// }
// }
//
// insertNewRun(paragraph, run, counter, afterSuperLong);
//
// paragraph.removeRun(counter.getCount());
//
// return counter.getCount();
// }
// private class Counter {
// private int i;
//
// public Counter(int i) {
// this.i = i;
// }
//
// public void increment() {
// i++;
// }
//
// public int getCount() {
// return i;
// }
// }
// private XWPFRun insertNewRun(XWPFParagraph xwpfParagraph, XWPFRun run, Counter counter, String newText) {
// XWPFRun newRun = xwpfParagraph.insertNewRun(counter.i);
// newRun.getCTR().set(run.getCTR());
// newRun.getCTR().getTArray(0).setStringValue(newText);
//
// counter.increment();
//
// return newRun;
// }
回答3:
my task was to replace texts of the format ${key} with values of a map within a word docx document. The above solutions were a good starting point but did not take into account all cases: ${key} can be spread not only across multiple runs but also across multiple texts within a run. I therefore ended up with the following code:
private void replace(String inFile, Map<String, String> data, OutputStream out) throws Exception, IOException {
XWPFDocument doc = new XWPFDocument(OPCPackage.open(inFile));
for (XWPFParagraph p : doc.getParagraphs()) {
replace2(p, data);
}
for (XWPFTable tbl : doc.getTables()) {
for (XWPFTableRow row : tbl.getRows()) {
for (XWPFTableCell cell : row.getTableCells()) {
for (XWPFParagraph p : cell.getParagraphs()) {
replace2(p, data);
}
}
}
}
doc.write(out);
}
private void replace2(XWPFParagraph p, Map<String, String> data) {
String pText = p.getText(); // complete paragraph as string
if (pText.contains("${")) { // if paragraph does not include our pattern, ignore
TreeMap<Integer, XWPFRun> posRuns = getPosToRuns(p);
Pattern pat = Pattern.compile("\\$\\{(.+?)\\}");
Matcher m = pat.matcher(pText);
while (m.find()) { // for all patterns in the paragraph
String g = m.group(1); // extract key start and end pos
int s = m.start(1);
int e = m.end(1);
String key = g;
String x = data.get(key);
if (x == null)
x = "";
SortedMap<Integer, XWPFRun> range = posRuns.subMap(s - 2, true, e + 1, true); // get runs which contain the pattern
boolean found1 = false; // found $
boolean found2 = false; // found {
boolean found3 = false; // found }
XWPFRun prevRun = null; // previous run handled in the loop
XWPFRun found2Run = null; // run in which { was found
int found2Pos = -1; // pos of { within above run
for (XWPFRun r : range.values())
{
if (r == prevRun)
continue; // this run has already been handled
if (found3)
break; // done working on current key pattern
prevRun = r;
for (int k = 0;; k++) { // iterate over texts of run r
if (found3)
break;
String txt = null;
try {
txt = r.getText(k); // note: should return null, but throws exception if the text does not exist
} catch (Exception ex) {
}
if (txt == null)
break; // no more texts in the run, exit loop
if (txt.contains("$") && !found1) { // found $, replace it with value from data map
txt = txt.replaceFirst("\\$", x);
found1 = true;
}
if (txt.contains("{") && !found2 && found1) {
found2Run = r; // found { replace it with empty string and remember location
found2Pos = txt.indexOf('{');
txt = txt.replaceFirst("\\{", "");
found2 = true;
}
if (found1 && found2 && !found3) { // find } and set all chars between { and } to blank
if (txt.contains("}"))
{
if (r == found2Run)
{ // complete pattern was within a single run
txt = txt.substring(0, found2Pos)+txt.substring(txt.indexOf('}'));
}
else // pattern spread across multiple runs
txt = txt.substring(txt.indexOf('}'));
}
else if (r == found2Run) // same run as { but no }, remove all text starting at {
txt = txt.substring(0, found2Pos);
else
txt = ""; // run between { and }, set text to blank
}
if (txt.contains("}") && !found3) {
txt = txt.replaceFirst("\\}", "");
found3 = true;
}
r.setText(txt, k);
}
}
}
System.out.println(p.getText());
}
}
private TreeMap<Integer, XWPFRun> getPosToRuns(XWPFParagraph paragraph) {
int pos = 0;
TreeMap<Integer, XWPFRun> map = new TreeMap<Integer, XWPFRun>();
for (XWPFRun run : paragraph.getRuns()) {
String runText = run.text();
if (runText != null && runText.length() > 0) {
for (int i = 0; i < runText.length(); i++) {
map.put(pos + i, run);
}
pos += runText.length();
}
}
return map;
}
回答4:
If somebody needs also to keep the formatting of the text, this code works better.
private static Map<Integer, XWPFRun> getPosToRuns(XWPFParagraph paragraph) {
int pos = 0;
Map<Integer, XWPFRun> map = new HashMap<Integer, XWPFRun>(10);
for (XWPFRun run : paragraph.getRuns()) {
String runText = run.text();
if (runText != null) {
for (int i = 0; i < runText.length(); i++) {
map.put(pos + i, run);
}
pos += runText.length();
}
}
return (map);
}
public static <V> void replace(XWPFDocument document, Map<String, V> map) {
List<XWPFParagraph> paragraphs = document.getParagraphs();
for (XWPFParagraph paragraph : paragraphs) {
replace(paragraph, map);
}
}
public static <V> void replace(XWPFDocument document, String searchText, V replacement) {
List<XWPFParagraph> paragraphs = document.getParagraphs();
for (XWPFParagraph paragraph : paragraphs) {
replace(paragraph, searchText, replacement);
}
}
private static <V> void replace(XWPFParagraph paragraph, Map<String, V> map) {
for (Map.Entry<String, V> entry : map.entrySet()) {
replace(paragraph, entry.getKey(), entry.getValue());
}
}
public static <V> void replace(XWPFParagraph paragraph, String searchText, V replacement) {
boolean found = true;
while (found) {
found = false;
int pos = paragraph.getText().indexOf(searchText);
if (pos >= 0) {
found = true;
Map<Integer, XWPFRun> posToRuns = getPosToRuns(paragraph);
XWPFRun run = posToRuns.get(pos);
XWPFRun lastRun = posToRuns.get(pos + searchText.length() - 1);
int runNum = paragraph.getRuns().indexOf(run);
int lastRunNum = paragraph.getRuns().indexOf(lastRun);
String texts[] = replacement.toString().split("\n");
run.setText(texts[0], 0);
XWPFRun newRun = run;
for (int i = 1; i < texts.length; i++) {
newRun.addCarriageReturn();
newRun = paragraph.insertNewRun(runNum + i);
/*
We should copy all style attributes
to the newRun from run
also from background color, ...
Here we duplicate only the simple attributes...
*/
newRun.setText(texts[i]);
newRun.setBold(run.isBold());
newRun.setCapitalized(run.isCapitalized());
// newRun.setCharacterSpacing(run.getCharacterSpacing());
newRun.setColor(run.getColor());
newRun.setDoubleStrikethrough(run.isDoubleStrikeThrough());
newRun.setEmbossed(run.isEmbossed());
newRun.setFontFamily(run.getFontFamily());
newRun.setFontSize(run.getFontSize());
newRun.setImprinted(run.isImprinted());
newRun.setItalic(run.isItalic());
newRun.setKerning(run.getKerning());
newRun.setShadow(run.isShadowed());
newRun.setSmallCaps(run.isSmallCaps());
newRun.setStrikeThrough(run.isStrikeThrough());
newRun.setSubscript(run.getSubscript());
newRun.setUnderline(run.getUnderline());
}
for (int i = lastRunNum + texts.length - 1; i > runNum + texts.length - 1; i--) {
paragraph.removeRun(i);
}
}
}
}
回答5:
There is the replaceParagraph implementation that replaces ${key} with value (the fieldsForReport parameter) and saves format by merging runs contents ${key}.
private void replaceParagraph(XWPFParagraph paragraph, Map<String, String> fieldsForReport) throws POIXMLException {
String find, text, runsText;
List<XWPFRun> runs;
XWPFRun run, nextRun;
for (String key : fieldsForReport.keySet()) {
text = paragraph.getText();
if (!text.contains("${"))
return;
find = "${" + key + "}";
if (!text.contains(find))
continue;
runs = paragraph.getRuns();
for (int i = 0; i < runs.size(); i++) {
run = runs.get(i);
runsText = run.getText(0);
if (runsText.contains("${") || (runsText.contains("$") && runs.get(i + 1).getText(0).substring(0, 1).equals("{"))) {
//As the next run may has a closed tag and an open tag at
//the same time, we have to be sure that our building string
//has a fully completed tags
while (!openTagCountIsEqualCloseTagCount(runsText))) {
nextRun = runs.get(i + 1);
runsText = runsText + nextRun.getText(0);
paragraph.removeRun(i + 1);
}
run.setText(runsText.contains(find) ?
runsText.replace(find, fieldsForReport.get(key)) :
runsText, 0);
}
}
}
}
private boolean openTagCountIsEqualCloseTagCount(String runText){
String openTag = "${";
String closeTag = "}";
int openTagCount;
int closeTagCount;
openTagCount = StringUtils.countMatches(testString, openTag);
closeTagCount = StringUtils.countMatches(testString, closeTag);
if(openTagCount == closeTagCount){
return true;
}
else{
return false;
}
}
Implementation replaceParagraph
Unit test
回答6:
The first chunk of code is giing me a NullPointerException, anyone know what is wrong?
run.getText(int position) - from documentation: Returns: the text of this text run or null if not set
Just check if it is not null before calling contains() on it
And btw if you want to replace the text you need to set it in position from which you get it, in this case r.setText(text, 0);. Otherwise text will be added not replaced
回答7:
As of the date of writing, none of the answers replace properly.
Gagravars answer does not include cases where words to replace are split in runs; Thierry Boduins solution sometimes left words to replace blank when they were after other words to replace, also it does not check tables.
Using Gagtavars answer as base I have also checked the run before current run if the text of both runs contain the word to replace, adding else block. My addition in kotlin:
if (text != null) {
if (text.contains(findText)) {
text = text.replace(findText, replaceText)
r.setText(text, 0)
} else if (i > 0 && p.runs[i - 1].getText(0).plus(text).contains(findText)) {
val pos = p.runs[i - 1].getText(0).indexOf('$')
text = textOfNotFullSecondRun(text, findText)
r.setText(text, 0)
val findTextLengthInFirstRun = findTextPartInFirstRun(p.runs[i - 1].getText(0), findText)
val prevRunText = p.runs[i - 1].getText(0).replaceRange(pos, findTextLengthInFirstRun, replaceText)
p.runs[i - 1].setText(prevRunText, 0)
}
}
private fun textOfNotFullSecondRun(text: String, findText: String): String {
return if (!text.contains(findText)) {
textOfNotFullSecondRun(text, findText.drop(1))
} else {
text.replace(findText, "")
}
}
private fun findTextPartInFirstRun(text: String, findText: String): Int {
return if (text.contains(findText)) {
findText.length
} else {
findTextPartInFirstRun(text, findText.dropLast(1))
}
}
it is the list of runs in a paragraph. Same with the search block in the table. With this solution I did not have any issues yet. All formatting is intact.
Edit: I made a java lib for replacing, check it out: https://github.com/deividasstr/docx-word-replacer
回答8:
The answer accepted here needs one more update along with Justin Skiles update. r.setText(text, 0); Reason: If not updating setText with pos variable, the output will be the combination of old string and replace string.
回答9:
I suggest my solution for replacing text between #, for example: This #bookmark# should be replaced. It is replace in:
- paragraphs;
- tables;
- footers.
Also, it takes into account situations, when symbol # and bookmark are in the separated runs (replace variable between different runs).
Here link to the code: https://gist.github.com/aerobium/bf02e443c079c5caec7568e167849dda
来源：https://stackoverflow.com/questions/22268898/replacing-a-text-in-apache-poi-xwpf