S5700交换机配置端口镜像

<Quidway>system-view //进入系统视图

Enter system view, return user view with Ctrl+Z.

[Quidway]

[Quidway]observe-port 1 interface GigabitEthernet 0/0/1 //observe：观察监听命名为1 用交换机的1端口全意：把交换机的1端口作为监听端口，并且命名为1

[Quidway]interface GigabitEthernet 0/0/11 //进入11端口视图

[Quidway-GigabitEthernet0/0/11]port-mirroring to observe-port 1 both 端口镜像到监听端口1

[Quidway-GigabitEthernet0/0/11]quit //退出

[Quidway]interface GigabitEthernet 0/0/12

[Quidway-GigabitEthernet0/0/12]port-mirroring to observe-port 1 both端口镜像到监听端口1

[Quidway-GigabitEthernet0/0/12]display th //显示配置

interface GigabitEthernet0/0/12

port-mirroring to observe-port 1 inbound

port-mirroring to observe-port 1 outbound

return

[Quidway-GigabitEthernet0/0/12]quit

[Quidway]q

<Quidway>save //保存配置

The current configuration will be written to the device.

Are you sure to continue?[Y/N]y

Now saving the current configuration to the slot 0.

Oct 1 2008 00:20:14+08:00 Quidway %%01CFM/4/SAVE(l)[26]:The user chose Y when deciding whether to save the configuration to the device.

Save the configuration successfully.

<Quidway>display current-configuration //显示配置文件

observe-port 1 interface GigabitEthernet0/0/1 //监听端口命名为1 是交换机端口为1

interface GigabitEthernet0/0/11 //输入输出的都要复制到监听端口1

port-mirroring to observe-port 1 inbound

port-mirroring to observe-port 1 outbound

interface GigabitEthernet0/0/12 //输入输出的都要复制到监听端口1

port-mirroring to observe-port 1 inbound

port-mirroring to observe-port 1 outbound

来源：https://www.cnblogs.com/Eric-bky/p/4378493.html

标签