问题
I'm using Redhawk 1.10.0 on a CentOS 6.5 machine 64 bit and USRP b100 with UHD driver 3.7.2. The USRP b100 is recognized correctly by the system. It is a USB device. I downloaded the latest version of UHD_USRP Device ver. 3.0 for REDHAWK and I created a Node including a GPP and a UHD_USRP devices. The Node is started without any problem but when I run a simple waveform to read data from the USRP as a RX_DIGITIZER I got the following error:
Failed to create application: usrp_test_248_173059195 Failed to satisfy 'usesdevice'
dependencies DCE:18964b3d-392e-4b98-a90d-0569b5d46ffefor application 'usrp_test_248_173059195'
IDL:CF/ApplicationFactory/CreateApplicationError:1.0
The log of the Device Manager reports that:
2014-09-05 17:31:03 TRACE FrontendTunerDevice:369 - CORBA::Boolean frontend::FrontendTunerDevice<TunerStatusStructType>::allocateCapacity(const CF::Properties&) [with TunerStatusStructType = frontend_tuner_status_struct_struct]
2014-09-05 17:31:03 INFO FrontendTunerDevice:502 - allocateCapacity: NO AVAILABLE TUNER. Make sure that the device has an initialized frontend_tuner_status
2014-09-05 17:31:03 TRACE FrontendTunerDevice:578 - void frontend::FrontendTunerDevice<TunerStatusStructType>::deallocateCapacity(const CF::Properties&) [with TunerStatusStructType = frontend_tuner_status_struct_struct]
2014-09-05 17:31:03 DEBUG FrontendTunerDevice:603 - ALLOCATION_ID NOT FOUND: [usrpAllocation]
2014-09-05 17:31:03 DEBUG FrontendTunerDevice:637 - ERROR WHEN DEALLOCATING. SKIPPING...
The Node console:
2014-09-05 17:31:39 TRACE ApplicationFactory_impl:2132 - Done building Component Info From SPD File
2014-09-05 17:31:39 TRACE ApplicationFactory_impl:1040 - Application has 1 usesdevice dependencies
2014-09-05 17:31:39 TRACE prop_utils:509 - setting struct item FRONTEND::tuner_allocation::allocation_id
2014-09-05 17:31:39 TRACE prop_utils:509 - setting struct item FRONTEND::tuner_allocation::bandwidth
2014-09-05 17:31:39 TRACE prop_utils:509 - setting struct item FRONTEND::tuner_allocation::center_frequency
2014-09-05 17:31:39 TRACE prop_utils:509 - setting struct item FRONTEND::tuner_allocation::group_id
2014-09-05 17:31:39 TRACE prop_utils:509 - setting struct item FRONTEND::tuner_allocation::rf_flow_id
2014-09-05 17:31:39 TRACE prop_utils:509 - setting struct item FRONTEND::tuner_allocation::sample_rate
2014-09-05 17:31:39 TRACE prop_utils:509 - setting struct item FRONTEND::tuner_allocation::tuner_type
2014-09-05 17:31:39 TRACE AllocationManager_impl:134 - Servicing 1 allocation request(s)
2014-09-05 17:31:39 TRACE AllocationManager_impl:144 - Allocation request DCE:18964b3d-392e-4b98-a90d-0569b5d46ffe contains 3 properties
2014-09-05 17:31:39 TRACE AllocationManager_impl:243 - Allocating against device uhd_node:USRP_UHD_1
2014-09-05 17:31:39 TRACE AllocationManager_impl:353 - Matching DCE:cdc5ee18-7ceb-4ae6-bf4c-31f983179b4d 'FRONTEND::TUNER' eq 'FRONTEND::TUNER'
2014-09-05 17:31:39 TRACE AllocationManager_impl:353 - Matching DCE:0f99b2e4-9903-4631-9846-ff349d18ecfb 'USRP' eq 'USRP'
2014-09-05 17:31:39 TRACE AllocationManager_impl:395 - Adding external property FRONTEND::tuner_allocation
2014-09-05 17:31:39 TRACE AllocationManager_impl:407 - Matched 2 properties
2014-09-05 17:31:39 TRACE AllocationManager_impl:264 - Allocating 1 properties (1 calls)
2014-09-05 17:31:39 TRACE AllocationManager_impl:267 - Device lacks sufficient capacity
2014-09-05 17:31:39 TRACE AllocationManager_impl:243 - Allocating against device uhd_node:GPP_1
2014-09-05 17:31:39 TRACE AllocationManager_impl:353 - Matching DCE:cdc5ee18-7ceb-4ae6-bf4c-31f983179b4d 'GPP' eq 'FRONTEND::TUNER'
2014-09-05 17:31:39 TRACE AllocationManager_impl:248 - Matching failed
2014-09-05 17:31:39 DEBUG ApplicationFactory_impl:1060 - Failed to satisfy 'usesdevice' dependencies DCE:18964b3d-392e-4b98-a90d-0569b5d46ffefor application 'usrp_test_248_173059195'
2014-09-05 17:31:39 TRACE ApplicationFactory_impl:528 - Unbinding the naming context
2014-09-05 17:31:39 TRACE Properties:85 - Destruction for properties
2014-09-05 17:31:39 TRACE PRF:312 - Deleting PRF containing 4 properties
I used the following parameters:
<usesdevicedependencies>
<usesdevice id="DCE:18964b3d-392e-4b98-a90d-0569b5d46ffe"
type="usesUSRP">
<propertyref refid="DCE:cdc5ee18-7ceb-4ae6-bf4c-31f983179b4d"
value="FRONTEND::TUNER" />
<propertyref refid="DCE:0f99b2e4-9903-4631-9846-ff349d18ecfb"
value="USRP" />
<structref refid="FRONTEND::tuner_allocation">
<simpleref refid="FRONTEND::tuner_allocation::tuner_type"
value="RX_DIGITIZER" />
<simpleref refid="FRONTEND::tuner_allocation::allocation_id"
value="usrpAllocation" />
<simpleref refid="FRONTEND::tuner_allocation::center_frequency"
value="102500000" />
<simpleref refid="FRONTEND::tuner_allocation::bandwidth"
value="320000" />
<simpleref refid="FRONTEND::tuner_allocation::sample_rate"
value="250000" />
<simpleref refid="FRONTEND::tuner_allocation::group_id"
value="" />
<simpleref refid="FRONTEND::tuner_allocation::rf_flow_id"
value="" />
</structref>
</usesdevice>
</usesdevicedependencies>
The b100 configuration is the following:
-- USRP-B100 clock control: 10 -- r_counter: 2 -- a_counter: 0 -- b_counter: 20 -- prescaler: 8 -- vco_divider: 5 -- chan_divider: 5 -- vco_rate: 1600.000000MHz -- chan_rate: 320.000000MHz -- out_rate: 64.000000MHz -- _____________________________________________________ / | Device: B-Series Device | _____________________________________________________ | / | | Mboard: B100 | | revision: 8192 | | serial: E5R10Z1B1 | | FW Version: 4.0 | | FPGA Version: 11.4 | | | | Time sources: none, external, _external_ | | Clock sources: internal, external, auto | | Sensors: ref_locked | | _____________________________________________________ | | / | | | RX DSP: 0 | | | Freq range: -32.000 to 32.000 Mhz | | _____________________________________________________ | | / | | | RX Dboard: A | | | ID: WBX v3, WBX v3 + Simple GDB (0x0057) | | | Serial: E5R1BW6XW | | | _____________________________________________________ | | | / | | | | RX Frontend: 0 | | | | Name: WBXv3 RX+GDB | | | | Antennas: TX/RX, RX2, CAL | | | | Sensors: lo_locked | | | | Freq range: 68.750 to 2200.000 Mhz | | | | Gain range PGA0: 0.0 to 31.5 step 0.5 dB | | | | Connection Type: IQ | | | | Uses LO offset: No | | | _____________________________________________________ | | | / | | | | RX Codec: A | | | | Name: ad9522 | | | | Gain range pga: 0.0 to 20.0 step 1.0 dB | | _____________________________________________________ | | / | | | TX DSP: 0 | | | Freq range: -32.000 to 32.000 Mhz | | _____________________________________________________ | | / | | | TX Dboard: A | | | ID: WBX v3 (0x0056) | | | Serial: E5R1BW6XW | | | _____________________________________________________ | | | / | | | | TX Frontend: 0 | | | | Name: WBXv3 TX+GDB | | | | Antennas: TX/RX, CAL | | | | Sensors: lo_locked | | | | Freq range: 68.750 to 2200.000 Mhz | | | | Gain range PGA0: 0.0 to 31.0 step 1.0 dB | | | | Connection Type: IQ | | | | Uses LO offset: No | | | _____________________________________________________ | | | / | | | | TX Codec: A | | | | Name: ad9522 | | | | Gain range pga: -20.0 to 0.0 step 0.1 dB
Where's my fault? Thanks in advance for any help.
回答1:
The frontend_tuner_status struct sequence is what defines the device capabilities and capacity. If the sequence is empty, the allocation will always result in lack of capacity. An empty frontend_tuner_status property is usually the result of not specifying the target device, or not being able to find the specified target device.
You must specify the target device using the target_device struct property. This can be done within the Node or at run-time. Previous versions of the USRP_UHD REDHAWK Device only allowed the IP address to be specified using a property, but in order to support USB-connected (and in general, non-network-connected) USRP devices, this has been replaced with the target_device struct property.
The target_device property allows the user to specify ip_address, name, serial, or type, and will use the first USRP hardware device that meets the criteria, if one is found. The information that should be specified in the target_device struct can be determined by setting the update_available_devices property to true, causing the available_devices struct sequence to be populated with all found devices (the same devices and information that is reported by the command line tool uhd_find_devices).
To determine if the USRP_UHD REDHAWK Device is connected to a target device, inspect the properties. Specifically, frontend_tuner_status sequence will be empty if not linked to a hardware device, as well as the device_motherboards and device_channels properties.
来源：https://stackoverflow.com/questions/25689591/uhd-usrp-device-lacks-capacity