问题
PLEASE SEE BELOW THE ORIGINAL QUESTION FOR SOME TEST COMPARISONS OF DIFFERENT WAYS:
So I tried 2 ways so far:
1.Iterate through directory using the code from Get Folder Size from Windows Command Line :
@echo off
set size=0
for /r %%x in (folder\*) do set /a size+=%%~zx
echo %size% Bytes
2.Save output of a
'dir %folder% /s /a'
into a text file, and then read in the size at the bottom
3.The last way I am trying right now is using du (disk utility tool from MS - https://technet.microsoft.com/en-us/sysinternals/bb896651.aspx ).
Now with exception of #3 both of those ways seem way too slow for what I need (100s of thousands of files). So the question is which one of these is the fastest / should be fastest, and if there are any other fast(er) ways to get size of folder contents that has 100k+ files (and there are 100s of folders)
START EDIT:
Below is my very hacky way of doing the comparison (butchered my program to see some outputs)
There are some small bugs with some parts like option 3 will fail because it tries to handle a number bigger than 32-bit limit, and I'm sure there is some more issues, but the general timings I think are evident unless I really messed up on my logic.
Option I: Iterate through directories, using VB script to read in the text output from 'dir' and look for the size at the end + convert it to MB (originally got it from somewhere else that I actually lose the place where I got it from) Option II: Iterate, with findstr pipe and output the result directly (no converstion to MB) - from @MC ND Option III: use the compact command to iterate - from @npocmaka Option IV: from @user1016274 - using robocoby
(There are some more answers, but these are the ones I've been able to incorporate)
These are the results i got, and they are pretty consistent in relevance to each other, robocopy blows them away
Option I and Option II were usually close, with Option II slightly better (anywhere from 1min 10sec to 2min 10 secs for both, not sure where the difference is coming from) Part III - 16-17 mins Part IV - 10-20 seconds
@echo OFF
setlocal enabledelayedexpansion
REM OPTION I - directory iteration
REM OPTION II - iteration with findstr pipe
REM OPTION III - compact
:MAIN
REM Initialize log filename
for /f "delims=" %%a in ('echo %date:~10,4%%date:~4,2%%date:~7,2%%time:~0,2%%time:~3,2%%time:~6,2%') do @set LOGFILEPOSTFIX=%%a
set LOGFILEPOSTFIX=%date:~10,4%%date:~4,2%%date:~7,2%%time:~0,2%%time:~3,2%%time:~6,2%
set TIMESTAMP=%date:~10,4%_%date:~4,2%_%date:~7,2%_%time:~0,2%_%time:~3,2%_%time:~6,2%
echo %TIMESTAMP%
set "LOGFILE=Proj_not_in_db_%LOGFILEPOSTFIX%.log"
set option=1
set TIMESTAMP=%date:~10,4%_%date:~4,2%_%date:~7,2%_%time:~0,2%_%time:~3,2%_%time:~6,2%
echo %TIMESTAMP% - PART I ---- Directory Listing into file, iterate through the sizes of all files inside folder >> %LOGFILE%
echo %TIMESTAMP% - PART I
call :PROCESSFOLDER
set TIMESTAMP=%date:~10,4%_%date:~4,2%_%date:~7,2%_%time:~0,2%_%time:~3,2%_%time:~6,2%
echo %TIMESTAMP% - PART I ---- END >> %LOGFILE%
echo %TIMESTAMP% - PART I - END
set option=2
set TIMESTAMP=%date:~10,4%_%date:~4,2%_%date:~7,2%_%time:~0,2%_%time:~3,2%_%time:~6,2%
echo %TIMESTAMP% - PART II findstr pipe ---- >> %LOGFILE%
echo %TIMESTAMP% - PART II
call :PROCESSFOLDER
set TIMESTAMP=%date:~10,4%_%date:~4,2%_%date:~7,2%_%time:~0,2%_%time:~3,2%_%time:~6,2%
echo %TIMESTAMP% - PART II ---- END>> %LOGFILE%
echo %TIMESTAMP% - PART II - END
set option=3
set TIMESTAMP=%date:~10,4%_%date:~4,2%_%date:~7,2%_%time:~0,2%_%time:~3,2%_%time:~6,2%
echo %TIMESTAMP% - PART III compact ---- >> %LOGFILE%
echo %TIMESTAMP% - PART III
call :PROCESSFOLDER
set TIMESTAMP=%date:~10,4%_%date:~4,2%_%date:~7,2%_%time:~0,2%_%time:~3,2%_%time:~6,2%
echo %TIMESTAMP% - PART III ---- END>> %LOGFILE%
echo %TIMESTAMP% - PART III - END
set option=4
set TIMESTAMP=%date:~10,4%_%date:~4,2%_%date:~7,2%_%time:~0,2%_%time:~3,2%_%time:~6,2%
echo %TIMESTAMP% - PART IV robocopy ---- >> %LOGFILE%
echo %TIMESTAMP% - PART IV
call :PROCESSFOLDER
call :CLEANUP
echo FINAL
pause
goto :EOF
:PROCESSFOLDER
echo C:\Windows
echo Processing C:\Windows >> %LOGFILE%
break > projects_in_folder.tmp
for /f "tokens=1-4,* SKIP=7" %%b IN ('dir "C:\Windows" /Q /TW /AD') do (
set _folder=%%f
REM Don't write the 2 lines at the end displaying summary information
if NOT "%%e" EQU "bytes" (
SET _folder=!_folder:~23!
echo !_folder!,%%b>> projects_in_folder.tmp
)
)
set "folder_path=C:\Windows"
call :COMPARE
goto :EOF
:COMPARE
set file_name=%folder_path:\=_%
break > "%file_name%.txt"
if %option%==4 (
set "full_path=C:\Windows"
call :GETFOLDERINFO4
set TIMESTAMP=%date:~10,4%_%date:~4,2%_%date:~7,2%_%time:~0,2%_%time:~3,2%_%time:~6,2%
echo %TIMESTAMP% - PART IV ---- END>> %LOGFILE%
echo %TIMESTAMP% - PART IV - END
)
for /f "tokens=1,2* delims=," %%a in (projects_in_folder.tmp) do (
for /f "tokens=1,* delims=_" %%x in ("%%a") do (
set "projcode=%%x"
)
set full_path=%folder_path%\%%a
if %option%==1 call :GETFOLDERINFO
if %option%==2 call :GETFOLDERINFO2
if %option%==3 call :GETFOLDERINFO3
echo PROJ: %%a SIZE: !totalsize! LASTMODIFIED: %%b >> %LOGFILE%
)
goto :EOF
:GETFOLDERINFO2
set "size=0"
set target=!full_path!
for /f "tokens=3,5" %%a in ('
dir /a /s /w /-c "%target%"
^| findstr /b /l /c:" "
') do if "%%b"=="" set "size=%%a"
echo %size%
set totalsize=%size%
goto :EOF
:GETFOLDERINFO4
pushd "%full_path%" || goto :EOF
setlocal
for /f "tokens=1-10,* delims= " %%a in ('
robocopy %full_path% %TEMP% /S /L /BYTES /XJ /NFL /NDL /NJH ^| find "Bytes"
') do echo %full_path%: %%c
popd
goto :EOF
:GETFOLDERINFO
set totalsize=0
dir "%full_path%" /s /a > size.txt
REM Run VBScript that outputs size in MB which is saved
pushd %~dp0
start /b "" cscript /nologo foldersize.vbs
FOR /F "usebackq tokens=*" %%r in (`CSCRIPT "foldersize.vbs"`) DO SET totalsize=%%r
echo bla > nul
goto :EOF
:GETFOLDERINFO3
set "last=#"
set "_size="
for /f "tokens=1 delims= " %%s in ('compact /s:"%full_path%" /q ') do (
set "_size=!last!"
set "last=%%s"
)
set "_size=%_size: =%"
set "_size=%_size: =%"
set "_size=%_size:.=%"
set "_size=%_size:,=%"
set "_size=%_size: =%"
echo folder size is : %_size% bytes
set totalsize=%_size%
goto :EOF
:CLEANUP
DEL /Q /S projects_in_folder.tmp
DEL /Q /S size.txt
goto :EOF
回答1:
After some testing and comparing the performance of
dir /scompact /s
and powershell GetChild-Item
I found that using robocopy is much faster. One additional advantage is that even very long paths do not cause an error (> 256 characters in path), for instance in deeply nested folders.
And if you prefer to not count data behind junctions that can easily be included with robocopy like this:
@echo off
pushd "%~1" || goto :EOF
for /f "tokens=2 delims= " %%a in ('
robocopy "%CD%" "%TEMP%" /S /L /BYTES /XJ /NFL /NDL /NJH /R:0 ^| find "Bytes"
') do echo %CD%: %%a
popd
If you leave out the /BYTES option you'll get the size value formatted in MB or GB. One would have to print the dimension (k,m,g,t denoting kilo, mega, giga, tera) as well in this case, using another loop variable:
for /f "tokens=2-3 delims= " %%a in ('
robocopy "%CD%" "%TEMP%" /S /L /XJ /NFL /NDL /NJH /R:0 ^| findstr "Bytes"
') do (
set dim=%%b
set "dim=!dim:k=KB!" & set "dim=!dim:m=MB!" & set "dim=!dim:g=GB!" & set "dim=!dim:t=TB!"
if !dim! EQU %%b set dim=B
echo ^ %CD%: %%a !dim!
)
%%b holds either the dimension letter or a numeric value. This is tested by substitution to avoid the 32bit limit of set /A.
回答2:
You can try with (in the spirit of your second case)
@echo off
setlocal enableextensions disabledelayedexpansion
set "target=%~1"
if not defined target set "target=%cd%"
set "size=0"
for /f "tokens=3,5" %%a in ('
dir /a /s /w /-c "%target%"
^| findstr /b /l /c:" "
') do if "%%b"=="" set "size=%%a"
echo %size%
回答3:
Since you are willing to use VBScript (based on your comment below your question), then you can simply use the FileSystemObject Folder object Size property. It reports the total size of all files within the folder, including files in all sub-folders (recursive).
The following simple JScript script prints out the size of the current folder:
var fso = new ActiveXObject("Scripting.FileSystemObject");
WScript.Echo(fso.GetFolder('.').Size);
I chose JScript instead of VBScript because it is simple to embed JScript within a batch script (though there are methods to do the same with VBScript).
Here is a simple hybrid script utility that reports the total size of any path you pass in as the first and only argument. The hybrid script makes it very convenient to call, since you don't have to specify CSCRIPT.
FolderSize.bat
@if (@X)==(@Y) @end /* Harmless hybrid line that begins a JScript comment
::FolderSize.bat FolderPath
::
:: Print the total size of all files within FolderPath,
:: including all sub-folders, recursively.
::******** Batch Code *********
@echo off
cscript //nologo //e:jscript "%~f0" %1
exit /b
********** JScript Code *******/
var fso = new ActiveXObject("Scripting.FileSystemObject");
WScript.Echo(fso.GetFolder(WScript.Arguments.Unnamed(0)).Size);
The only limitation is you must have access to all folders (and files?) within the folder, otherwise it fails with an error message.
回答4:
try this:
:foldersize
@echo off
pushd "%~1"
setlocal
set "_size="
for /f "tokens=1 delims=t" %%s in ('compact /s /q ^|find " total bytes"') do (
set "_size=%%s"
)
set "_size=%_size: =%"
set "_size=%_size: =%"
set "_size=%_size:.=%"
set "_size=%_size:,=%"
set "_size=%_size: =%"
echo folder size is : %_size% bytes
endlocal
popd
it accepts one argument - the folder.The compact /s /q (/q is for reporting so no changes will be applied) produces less output and there's a chance to be faster than DIR .
EDIT: a little bit optimized variants (the one is the @MC MD's one - probably the faster).The idea is to skip FIND or FINDSTR usage as they are external programs and will make the scripts slower:
:foldersize
@echo off
pushd "%~1"
setlocal enableDelayedExpansion
set "last=#"
set "_size="
for /f "tokens=1 delims= " %%s in ('compact /s /q') do (
set "_size=!last!"
set "last=%%s"
)
set "_size=%_size: =%"
set "_size=%_size: =%"
set "_size=%_size:.=%"
set "_size=%_size:,=%"
set "_size=%_size: =%"
echo folder size is : %_size% bytes
endlocal
popd
AND
@echo off
:original script by MC ND
setlocal enableextensions enableDelayedExpansion
set "target=%~1"
if not defined target set "target=%cd%"
set "size=0"
set "last=#"
set "pre_last=#"
rem set "pre_pre_last=#"
for /f "tokens=3" %%a in ('
dir /a:-d /s /w /-c "%target%"
') do (
set "pre_last=!last!"
set "last=%%a"
)
echo !pre_last!
回答5:
I think that looping over each line of output of the compact or dir command is inefficient and can be avoided by filtering the interim result:
@echo off
REM dirsize.cmd 2015-05-29
pushd "%~1" || goto :EOF
setlocal
for /f "tokens=1-3*" %%A in ('compact /s /a /q ^| find "Datenbytes" ^| find /v "Auflistung"') do echo %CD%: %%A %%B %%C
popd
Changes:
- the script will terminate if the given path does not exist rather than scanning the current directory
- compact /a is used to include hidden and system files as well
- the complete output is piped into a find. This is where a locale dependent search string is needed, to filter out the summary line. In German it's "Datenbytes" but this may as well be included in a foldername. Thus, a second negative filter will suppress these. Again, locale dependent (but independence was not called for).
The advantage is that find will discard output lines faster than a shell loop with variable assignments. The cost of calling it is neglegible.
Please note that compact /q will not stop the compression action. It will only shorten the output. Not supplying any arguments in the call to compress will make it list only and not compact files/folders.
edit: Though these points are all valid IMHO, see my other answer for a much faster way.
回答6:
If you're not opposed to using PowerShell, Here's a quick script you can use:
param([String]$path=".")
Get-ChildItem $path | Measure-Object -property length -sum
来源：https://stackoverflow.com/questions/30513287/faster-way-to-get-folder-size-with-batch-script