问题
I'm currently trying to connect two phones which know each other's MAC address via Wi-Fi Direct, and stumbled upon the following problem: The MAC address, which I receive from
WifiManager wifiMan = (WifiManager) this
.getSystemService(Context.WIFI_SERVICE);
WifiInfo wifiInf = wifiMan.getConnectionInfo();
MAC_ADDRESS = wifiInf.getMacAddress();
is slightly different than the one I receive from the WifiP2pManager when discovering and requesting peers. Example: a0:xx:xx:... turns into a2:xx:xx....
Does anyone know why? I did not find any way to get the "Wi-Fi Direct MAC address", and as I thought the MAC address should be unique, and it's the same Wi-Fi module that handles both (normal Wi-Fi and P2P/Direct). This is very weird..
What should I do? For the two devices (Galaxy Nexus) I've got, it's always only the first two characters that differ in the MAC addresses - should I simply discard them? Is the probability to encounter problems (two devices which only differ in the first part of MAC address) too high?
Thanks.
回答1:
Reading about the MAC address on wikipedia.
Addresses can either be universally administered addresses or locally administered addresses.
Universally administered and locally administered addresses are distinguished by setting the second-least-significant bit of the most significant byte of the address. This bit is also referred to as the U/L bit, short for Universal/Local, which identifies how the address is administered. If the bit is 0, the address is universally administered. If it is 1, the address is locally administered.
Since Wi-Fi Direct is just another stack on top of MAC, you should also check what that bit can mean for it. I've found some mail discussion shedding some light on this. Apparently quote below is from a WFA spec.
The P2P Device shall assign a P2P Interface Address, corresponding to the format as described in §7.1.3.3.1 of IEEE Std 802.11‑2007 1, which is used to communicate with the P2P Group Owner or Clients within a P2P Group. A P2P Interface Address is not required to be globally unique and may be locally administered. A P2P Interface Address may be the same as the P2P Device Address provided the requirements for P2P Interface Address in this clause are satisfied.
So I believe answer to this question is, you shouldn't take MAC address from WifiManager and use it with Wi-Fi P2P connections.
回答2:
I had been searching for this during my project. My requirements were to uniquely identify devices in an adhoc P2p network formed with WiFi Direct. Each device should identify its friend device the next time when it comes into proximity. I needed my own WiFi (Direct) MAC and my friends' to create a Key for this friend zone creation.
My Research: The design is in such a way that there is an Unique Universal ID and a Local ID. Reason: Universal ID can only be used to connect to Infrastructure mode Networks. Local ID could be used for "ad-hoc" mode networks(device to device). In this ad-hoc mode, there are possibilities that a single device might simultaneosly belong to several ad-hoc groups.
- Hence to support this concurrent operations, P2p devices support Multiple MAC entities, possibly on different channels.
- For each session, a persistent group MAY use a different channel and device MAC for each session.
- P2P devices use their global MAC address as Device ID during discovery and negotiation, and a temporary local MAC address for all frames within a group. Understood from here
However, there is NO straight forward way to obtain one's own WiFi P2p MAC address. Issue 53437: Android.
In this issue discussion, the project member from google has suggested this is possible and just that it hasn't been documented
Solution: Using intent filter
WifiP2pManager.WIFI_P2P_THIS_DEVICE_CHANGED_ACTIONand the extra from the intentWifiP2pManager.EXTRA_WIFI_P2P_DEVICE
This is how I have used it in my project:
@Override
public void onReceive(Context context, Intent intent) {
....
....
String action = intent.getAction();
if (WifiP2pManager.WIFI_P2P_THIS_DEVICE_CHANGED_ACTION
.equals(action)) {
WifiP2pDevice device = (WifiP2pDevice) intent
.getParcelableExtra(WifiP2pManager.EXTRA_WIFI_P2P_DEVICE);
String myMac = device.deviceAddress;
Log.d(TAG, "Device WiFi P2p MAC Address: " + myMac);
/* Saving WiFi P2p MAC in SharedPref */
sharedPref = context.getSharedPreferences(context.getString(R.string.sp_file_name), Context.MODE_PRIVATE);
String MY_MAC_ADDRESS = sharedPref.getString(context.getString(R.string.sp_field_my_mac), null);
if (MY_MAC_ADDRESS == null || MY_MAC_ADDRESS != myMac) {
SharedPreferences.Editor editor = sharedPref.edit();
editor.putString(context.getString(R.string.sp_field_my_mac), myMac);
editor.commit();
}
Hope this helps someone!
回答3:
iFixit says that the Galaxy Nexus uses the BCM4330 for its MAC, Baseband, and PHY, so if you have any friends at Broadcom you could ask them.
Sadly, the datasheet is not public; the best I can do is link you to a block diagram.
回答4:
I was struggling all night to figure out a way to retrieve WiFi Direct mac address instead, since my requirements were drafted around the assumption that it's feasible.
It's kind of round about, you create a single device group and get the owner and the device address along with it.
Here's the code,
final WifiP2pManager p2pManager = (WifiP2pManager) getSystemService(WIFI_P2P_SERVICE);
final WifiP2pManager.Channel channel = p2pManager.initialize(this, getMainLooper(), null);
p2pManager.createGroup(channel, new WifiP2pManager.ActionListener() {
@Override
public void onSuccess() {
p2pManager.requestGroupInfo(channel, new WifiP2pManager.GroupInfoListener() {
@Override
public void onGroupInfoAvailable(WifiP2pGroup wifiP2pGroup) {
Log.i("", wifiP2pGroup.getOwner().deviceAddress);
// Following removal necessary to not have the manager busy for other stuff, subsequently
p2pManager.removeGroup(channel, new WifiP2pManager.ActionListener() {
@Override
public void onSuccess() {
Log.i("", "Removed");
}
@Override
public void onFailure(int i) {
Log.i("", "Failed " + i);
}
});
}
});
}
@Override
public void onFailure(int i) {
Log.i("", String.valueOf(i));
}
});
回答5:
Forget Wifi manager. Wifi direct address does not equals to MAC address. Wifi direct address uses for wifi direct connection. You can not use to anything else.
To connect two device with wifi direct device, you have to create a WifiP2pGroup with one of your device. With your another device, you have to search the WifiP2pGroups, select yours, and connect.
回答6:
You can get WiFi direct address using next code:
public String getWFDMacAddress(){
try {
List<NetworkInterface> interfaces = Collections.list(NetworkInterface.getNetworkInterfaces());
for (NetworkInterface ntwInterface : interfaces) {
if (ntwInterface.getName().equalsIgnoreCase("p2p0")) {
byte[] byteMac = ntwInterface.getHardwareAddress();
if (byteMac==null){
return null;
}
StringBuilder strBuilder = new StringBuilder();
for (int i=0; i<byteMac.length; i++) {
strBuilder.append(String.format("%02X:", byteMac[i]));
}
if (strBuilder.length()>0){
strBuilder.deleteCharAt(strBuilder.length()-1);
}
return strBuilder.toString();
}
}
} catch (Exception e) {
Log.d(TAG, e.getMessage());
}
return null;
}
来源：https://stackoverflow.com/questions/10968951/wi-fi-direct-and-normal-wi-fi-different-mac