问题
I have implemented a custom NSView which contains many NSTextFields and other NSViews. I then embedded that custom view in a scroll view using Editor > Embed In > Scroll View. This creates the appropriate hierarchy as visible in the Outline, but I needed to then add Auto Layout constraints to specify where this scroll view should be placed within the view (top, bottom, leading, trailing). Additionally I had to add constraints for the custom view, set against the clip view, in order to lay out the elements in the correct location. This works well, when I run the app all the elements appear appropriately and the view does bounce scroll. However, when I reduce the height of the main view so that that not all of the elements fit on screen, auto layout warnings appear and when I update the frames it increases the height of the view again. To fix that, I had to remove the scroll view's bottom constraint to the main view. Now when I run the app, the window is set to the right size, but I cannot scroll the custom view to get to the bottom of the content - it's restricted so it won't scroll at all besides the elastic bounce effect because you're at the edge limit. So my question is, what must I do in order to allow this scroll view to scroll when I'm laying out all elements in a XIB and using Auto Layout?
回答1:
Here's the general approach:
- Make the document view at least as tall as the clip view. Or, equivalently, make the clip view no taller than the document view.
- Allow the document view to grow in height, but not shrink beyond what its subviews require.
- Prevent ambiguity in the document view by having a low priority constraint to make it as small as possible given the other constraints.
So, for example, there should be a constraint between the clip view's bottom and the document view's bottom, but it should be an inequality: Superview.Bottom <= Document View.Bottom. (Or, equivalently, Document View.Bottom >= Superview.Bottom.)
Within the document view, you probably have some text field or something at the bottom and a constraint between that and the document view's bottom. Make that constraint an inequality: Superview.Bottom >= Text Field.Bottom + standard spacing.
That will cause ambiguity as to the height of the document view. It could be any size tall enough to fit all of its subviews. Add a height constraint. Set its priority to 51 and its constant to 0. That is, it wants to make the view have 0 height, but at very low priority so almost anything else will supersede it. But it resolves the ambiguity.
If you want to allow horizontal scrolling, you need to do the same general thing in the horizontal orientation.
Update:
There's another approach. Configure the constraints within the document view to give it a strict size (no inequalities). That's usually a chain of constraints from its top to the top subview, from that subview's bottom to the top of another subview, etc., and from the bottom of the bottom subview to the document view's bottom. Same for leading to trailing.
Then, the only necessary constraints between the clip view and the document view are top and leading constraints.
If you test in this configuration, you'll be able to resize and the scroll view will scroll. So, that's good. However, when the scroll view's content area is taller than the document view, the document view will be pinned to the bottom of the content area. You usually want it pinned to the top in that situation.
The reason is that the clip view is not flipped. Also, it's adjusting its bounds to match the document view. So, even though there's a constraint to keep the document view pinned to the top of the clip view, the top of the clip view isn't where you expect it to be. The clip view puts the document view at (0, 0), which is at the bottom.
So, the final piece is to create a subclass of NSClipView that overrides -isFlipped to return YES. Then, set the class of the clip view in the NIB to your subclass. After that, it will work as you want.
回答2:
Building on the answer from Ken Thomases, with Swift 4, one can add flipped as a User-Defined attribute to NSClipView, to pin the contents to the top of the scrollview.
回答3:
I'm going to re-post my answer from https://stackoverflow.com/a/49947440/2846508.
Look at Apple's 2012 developer conference videos about Auto Layout for information about using Auto Layout in code.
Simply use in Interface Builder or in code the approach I recorded in this video tutorial:
How to use NSScrollView with Auto Layout
This is the approach I used in this video:
Window -- set delegate and IBOutlet property
ScrollView -- fixed edges, no border, don't draw background
documentView -- fixed edges 0, then another trailing and bottom, clipView ≥ 0 @499 and clipView ≤ 0 @501 for both trailing and bottom constraints to documentView
label and text field in horizontal stack view, in vertical stack view
vertical stack view fixed edges default, then another bottom, bottom ≤ default @499 and ≥ default @750
horizontal stack view leading and trailing fixed 0
label and text field align Y center to horizontal stack view
text field top and bottom and trailing 2 @750, width ≥ 100, height ≥ 22
subsequent horizontal stack views leading and trailing fixed, align text field leadings
回答4:
To improve on Ken's answer, here is what I did:
• First, I read this wonderful tutorial about how to set up an NSScrollView in Interface Builder (IB) using auto layout.
• Then I did the following:
• Created an NSScrollView instance in IB;
• Created a new subclass of NSClipView and added the following code:
class ScCalendarClipView: NSClipView {
open override var isFlipped: Bool {
return true
}
}
• Created the custom document view and embedded it as a child of the NSScrollView instance in IB.
• Added the following constraints in IB in the view I embedded in the NSScrollView instance (let's call it here: DocumentView)
// Right
First Item: SuperView.Trailing
Relation: Less Than or Equal
Second Item: DocumentView.Trailing
Constant: 0
Priority: 510
Multiplier: 1
First Item: SuperView.Trailing
Relation: Greater Than or Equal
Second Item: DocumentView.Trailing
Constant: 0
Priority: 490
Multiplier: 1
// Left
First Item: DocumentView.Leading
Relation: Equal
Second Item: SuperView.Leading
Constant: 0
Priority: 1000
Multiplier: 1
// Bottom (negative constants increase the size of the document view)
First Item: SuperView.Bottom
Relation: Less Than or Equal
Second Item: DocumentView.Bottom
Constant: -600
Priority: 510
Multiplier: 1
// Bottom (constant should be equal to the bottom constraint above)
First Item: SuperView.Bottom
Relation: Greater Than or Equal
Second Item: DocumentView.Bottom
Constant: -600
Priority: 490
Multiplier: 1
// Top
First Item: DocumentView.Top
Relation: Equal
Second Item: SuperView.Top
Constant: 0
Priority: 1000
Multiplier: 1
来源：https://stackoverflow.com/questions/29241474/enabling-nsscrollview-to-scroll-its-contents-using-auto-layout-in-interface-buil