Wamp server 2.5 wrong page redirection

问题

I installed wamp server 2.5 with PHP 5.5. Now, when i try to access my project pages from the front page(wamp home page), it redirect to a wrong url and shows google cannot find this page.

The problem definition is

I enter to wamp using http://localhost

There I have many project. Suppose I click on sample_project

Then the page redirects to sample_projects/

And Google Chrome displays the error chrome cannot find this webpage

There are two fields are swown red marks in my wamp PHP extensions area. They are php_enchant and php_opcache

What is the problem with my wamp??am I missing something? Help please

回答1:

Honestly I think its highly inefficient to create Virtual Host for every.. single.. project. So after investigating I found a key variable in:

wamp/www/index.php.

After quick analysis, the variable's obvious purpose is to remove the 'localhost' in projects links.

Change this line:

$suppress_localhost = true;

To this:

$suppress_localhost = false;

回答2:

WAMPServer 2.5 Homepage the Your Projects Menu and Virtual Hosts

There has been a change of concept in WampServer 2.5 and there is a good reason for this change!

In WampServer 2.5 it is now STRONGLY encouraged to create a Virtual Host for each of your projects, even if you hold then in a \wamp\www\subfolder structure.

Virtual Hosts Documentation

Virtual Host Examples

The WampServer home page ( \wamp\www\index.php ) now expects you to have created a Virtual Host for all your projects and will therefore work properly only if you do so.

History

In order to make life easier for beginners using WampServer to learn PHP Apache and MySQL it was suggested that you create subfolders under the \wamp\www\ folder.

wamp
  |-- www
       |-- Chapter1
       |-- Chapter2
       |-- etc

These subfolders would then show as links in the WampServer Homepage under a menu called 'Your Projects' and these links would contain a link to localhost/subfoldername.

Acceptable only for simple tutorials

This made life easy for the complete beginner, and was perfectly acceptable for example for those following tutorials to learn PHP coding. However it was never intended for use when developing a real web site that you would later want to copy to your live hosted server. In fact if you did use this mechanism it often caused problems as the live sites configuration would not match your development configuration.

The Problem for real website development.

The reason for this is of course that the default DocumentRoot setting for wamp is

DocumentRoot "c:/wamp/www/"

regardless of what your subfolder was called. This ment that often used PHP code that queried the structure or your site received different information when running on your development WampServer to what it would receive when running on a live hosted server, where the DocumentRoot configuration points to the folder at the top of the website file hierarchy. This kind of code exists in many frameworks and CMS's for example WordPress and Joomla etc.

For Example

Lets say we have a project called project1 held in wamp\www\project1 and run incorrectly as localhost/project1/index.php

This is what would be reported by some of the PHP command in question:

$_SERVER['HTTP_HOST'] = localhost
$_SERVER['SERVER_NAME'] = localhost
$_SERVER['DOCUMENT_ROOT'] = c:/wamp/www

Now if we had correctly defined that site using a Virtual Host definition and ran it as http://project1 the results on the WAMPServer devlopment site will match those received when on a live hosted environment.

$_SERVER['HTTP_HOST'] = project1
$_SERVER['SERVER_NAME'] = project1
$_SERVER['DOCUMENT_ROOT'] = c:/wamp/www/project1

Now this difference may seem trivial at first but if you were to use a framework like WordPress or one of the CMS's like Joomla for example, this can and does cause problems when you move your site to a live server.

How to create a Virtual Host in WampServer

Actually this should work basically the same for any wndows Apache server, with differences only in where you may find the Apache config files.

There are 3 steps to create your first Virtual Host in Apache, and only 2 if you already have one defined.

Create the Virtual Host definition(s)
Add your new domain name to the HOSTS file.
Uncomment the line in httpd.conf that includes the Virtual Hosts definition file.

Step 1, Create the Virtual Host definition(s)

Edit the file called httpd-hosts.conf which for WampServer lives in

\wamp\bin\apache\apache2.4.9\conf\extra\httpd-hosts.conf

(Apache version numbers may differ, engage brain before continuing)

If this is the first time you edit this file, remove the default example code, it is of no use.

I am assuming we want to create a definition for a site called project1 that lives in

\wamp\www\project1

Very important, first we must make sure that localhost still works so that is the first VHOST definition we will put in this file.

<VirtualHost *:80>
    DocumentRoot "c:/wamp/www"
    ServerName localhost
    ServerAlias localhost
    <Directory  "c:/wamp/www">
        AllowOverride All
        Require local
    </Directory>
</VirtualHost>

Now we define our project: and this of course you do for each of your projects as you start a new one.

<VirtualHost *:80>
    DocumentRoot "c:/wamp/www/project1"
    ServerName project1
    <Directory  "c:/wamp/www/project1">
        AllowOverride All
        Require local
    </Directory>
</VirtualHost>

NOTE: That each Virtual Host as its own DocumentRoot defined. There are also many other parameters you can add to a Virtual Hosts definition, check the Apache documentation.

Small aside

The way virtual hosts work in Apache: The first definition in this file will also be the default site, so should the domain name used in the browser not match any actually defined virtually hosted domain, making localhost the first domain in the file will therefore make it the site that is loaded if a hack attempt just uses your IP Address. So if we ensure that the Apache security for this domain is ALWAYS SET TO

Require local

any casual hack from an external address will receive an error and not get into your PC, but should you misspell a domain you will be shown the WampServer homepage, because you are on the same PC as WampServer and therfore local.

Setp 2:

Add your new domain name to the HOSTS file. Now we need to add the domain name that we have used in the Virtual Host definition to the HOSTS file so that windows knows where to find it. This is similiar to creating a DNS A record, but it is only visible in this case on this specific PC.

Edit C:\windows\system32\drivers\etc\hosts

The file has no extension and should remain that way. Watch out for notepad, as it may try and add a .txt extension if you have no better editor. I suggest you download Notepad++, its free and a very good editor.

Also this is a protected file so you must edit it with administrator privileges, so launch you editor using the Run as Administrator menu option.

The hosts file should look like this when you have completed these edits

127.0.0.1 localhost
127.0.0.1 project1

::1 localhost
::1 project1

Note that you should have definitions in here for the IPV4 loopback address 127.0.0.1 and also the IPV6 loopback address ::1 as Apache is now IPV6 aware and the browser will use either IPV4 or IPV6 or both. I have no idea how it decides which to use, but it can use either if you have the IPV6 stack turned on, and most window OS's do as of XP SP3.

Now we must tell windows to refresh its domain name cache, so launch a command window again using the Run as Administrator menu option again, and do the following.

net stop dnscache
net start dnscache

This forces windows to clear its domain name cache and reload it, in reloading it will re-read the HOSTS file so now it knows about the domain project1.

Step 3: Uncomment the line in httpd.conf that includes the Virtual Hosts definition file.

Edit your httpd.conf, use the wampmanager.exe menus to make sure you edit the correct file.

Find this line in httpd.conf

# Virtual hosts
#Include conf/extra/httpd-vhosts.conf

And just remove the # to uncomment that line.

To activate this change in you running Apache we must now stop and restart the Apache service.

wampmanager.exe -> Apache -> Service -> Restart Service

Now if the WAMP icon in the system tray does not go GREEN again, it means you have probably done something wrong in the \wamp\bin\apache\apache2.4.9\conf\extra\httpd-hosts.conf file.

If so here is a useful mechanism to find out what is wrong. It uses a feature of the Apache exe (httpd.exe) to check its config files and report errors by filename and line numbers.

Launch a command window.

cd \wamp\bin\apache\apache2.4.9\bin
httpd -t

So fix the errors and retest again until you get the output

Syntax OK

Now there is one more thing.

There are actually 2 new menu items on the wampmanager menu system. One called [b]'My Projects'[/b] which is turned on by default. And a second one, called [b]'My Virtual Hosts'[/b], which is not activated by default.

'My Projects' will list any sub directory of the \wamp\www directory and provide a link to launch the site in that sub directory. As I said earlier, it launches 'project1` and not 'localhost/project1' so to make the link work we must create a Virtual Host definition to make this link actually launch that site in your browser, without the Virtual Host definition it's likely to launch a web search for the site name as a keyword or just return a site not found condition.

The 'My Virtual Hosts' menu item is a little different. It searches the file that is used to define Virtual Hosts ( we will get to that in a minute ) and creates menu links for each ServerName parameter it finds and creates a menu item for each one. This may seem a little confusing as once we create a Virtual Host definition for the sub directories of the \wamp\www folder some items will appear on both of the 'My Projects' menu and the 'My Virtual Hosts' menu's.

How do I turn this other 'My Virtual Hosts' menu on?

Make a backup of the \wamp\wampmanager.tpl file, just in case you make a mistake, its a very important file.
Edit the \wamp\wampmanager.tpl
Find this parameter ;WAMPPROJECTSUBMENU, its in the '[Menu.Left]' section.
Add this new parameter ;WAMPVHOSTSUBMENU either before or after the ;WAMPPROJECTSUBMENU parameter.
Save the file.
Now right click the wampmanager icon, and select 'Refresh'. If this does not add the menu, 'exit' and restart wampmanager.

Big Note The new menu will only appear if you already have some Virtual Hosts defined! Otherwise you will see no difference until you define a VHOST.

回答3:

I can't believe that Wampserver now expects everyone to create a virtual host for every project under development offline on their laptops? Your instructions seem to be very good but probably much too complicated for beginners (also, I suspect that the file path in your instructions for step2: adding the new domain to the HOSTS file only applies to 32-bit Windows)?

The solution from Rogue above (change $suppress_localhost="true"; to $suppress_localhost="false"; in c:/wamp/www/index.php) will work perfectly for 99% of the users who develop more than one website on their laptops.

Also uploading a completed website to an online server should not cause any real problems. BUt perhaps Wampserver had another reason for adding the $suppress_localhost code?

来源：https://stackoverflow.com/questions/23909645/wamp-server-2-5-wrong-page-redirection

标签

url

redirect

wamp