问题
I installed rabbitmqadmin and was able to list all the exchanges and queues. How can I use rabbitmqadmin or rabbitmqctl to delete all the queues.
回答1:
First, list your queues:
rabbitmqadmin list queues name
Then from the list, you'll need to manually delete them one by one:
rabbitmqadmin delete queue name='queuename'
Because of the output format, doesn't appear you can grep the response from list queues. Alternatively, if you're just looking for a way to clear everything (read: reset all settings, returning the installation to a default state), use:
rabbitmqctl stop_app
rabbitmqctl reset # Be sure you really want to do this!
rabbitmqctl start_app
回答2:
With rabbitmqadmin you can remove them with this one-liner:
rabbitmqadmin -f tsv -q list queues name | while read queue; do rabbitmqadmin -q delete queue name=${queue}; done
回答3:
Actually super easy with management plugin and policies:
Goto Management Console (localhost:15672)
Goto Admin tab
Goto Policies tab(on the right side)
Add Policy
Fill Fields
- Virtual Host: Select
- Name: Expire All Policies(Delete Later)
- Pattern: .*
- Apply to: Queues
- Definition: expires with value 1 (change type from String to Number)
Save
- Checkout Queues tab again
- All Queues must be deleted
- And don't forget remove policy!!!!!!.
回答4:
Try this:
rabbitmqadmin list queues name | awk '{print $2}' | xargs -I qn rabbitmqadmin delete queue name=qn
回答5:
If you don't have rabbitmqadmin installed, try to purge queues with rabbitmqctl:
rabbitmqctl list_queues | awk '{ print $1 }' | xargs -L1 rabbitmqctl purge_queue
回答6:
I made a deleteRabbitMqQs.sh, which accepts arguments to search the list of queues for, selecting only ones matching the pattern you want. If you offer no arguments, it will delete them all! It shows you the list of queues its about to delete, letting you quit before doing anything destructive.
for word in "$@"
do
args=true
newQueues=$(rabbitmqctl list_queues name | grep "$word")
queues="$queues
$newQueues"
done
if [ $# -eq 0 ]; then
queues=$(rabbitmqctl list_queues name | grep -v "\.\.\.")
fi
queues=$(echo "$queues" | sed '/^[[:space:]]*$/d')
if [ "x$queues" == "x" ]; then
echo "No queues to delete, giving up."
exit 0
fi
read -p "Deleting the following queues:
${queues}
[CTRL+C quit | ENTER proceed]
"
while read -r line; do
rabbitmqadmin delete queue name="$line"
done <<< "$queues"
If you want different matching against the arguments you pass in, you can alter the grep in line four. When deleting all queues, it won't delete ones with three consecutive spaces in them, because I figured that eventuality would be rarer than people who have rabbitmqctl printing its output out in different languages.
Enjoy!
回答7:
If you're trying to delete queues because they're unused and you don't want to reset, one option is to set the queue TTL very low via a policy, wait for the queues to be auto-deleted once the TTL is passed and then remove the policy (https://www.rabbitmq.com/ttl.html).
rabbitmqctl.bat set_policy delq ".*" '{"expires": 1}' --apply-to queues
To remove the policy
rabbitmqctl clear_policy delq
Note that this only works for unused queues
Original info here: http://rabbitmq.1065348.n5.nabble.com/Deleting-all-queues-in-rabbitmq-td30933.html
回答8:
Here is a way to do it with PowerShell. the URL may need to be updated
$cred = Get-Credential
iwr -ContentType 'application/json' -Method Get -Credential $cred 'http://localhost:15672/api/queues' | % {
ConvertFrom-Json $_.Content } | % { $_ } | ? { $_.messages -gt 0} | % {
iwr -method DELETE -Credential $cred -uri $("http://localhost:15672/api/queues/{0}/{1}" -f [System.Web.HttpUtility]::UrlEncode($_.vhost), $_.name)
}
回答9:
In Rabbit version 3.7.10 you can run below command with root permission:
rabbitmqctl list_queues | awk '{ print $1 }' | xargs -L1 rabbitmqctl delete_queue
回答10:
You can use rabbitmqctl eval as below:
rabbitmqctl eval 'IfUnused = false, IfEmpty = true, MatchRegex =
<<"^prefix-">>, [rabbit_amqqueue:delete(Q, IfUnused, IfEmpty) || Q <-
rabbit_amqqueue:list(), re:run(element(4, element(2, Q)), MatchRegex)
=/= nomatch ].'
The above will delete all empty queues in all vhosts that have a name beginning with "prefix-". You can edit the variables IfUnused, IfEmpty, and MatchRegex as per your requirement.
回答11:
Removing all queues using rabbitmqctl one liner
rabbitmqctl list_queues | awk '{ print $1 }' | sed 's/Listing//' | xargs -L1 rabbitmqctl purge_queue
回答12:
In case you only want to purge the queues which are not empty (a lot faster):
rabbitmqctl list_queues | awk '$2!=0 { print $1 }' | sed 's/Listing//' | xargs -L1 rabbitmqctl purge_queue
For me, it takes 2-3 seconds to purge a queue (both empty and non-empty ones), so iterating through 50 queues is such a pain while I just need to purge 10 of them (40/50 are empty).
回答13:
I tried rabbitmqctl and reset commands but they are very slow.
This is the fastest way I found (replace your username and password):
#!/bin/bash
# Stop on error
set -eo pipefail
USER='guest'
PASSWORD='guest'
curl -sSL -u $USER:$PASSWORD http://localhost:15672/api/queues/%2f/ | jq '.[].name' | sed 's/"//g' | xargs -L 1 -I@ curl -XDELETE -sSL -u $USER:$PASSWORD http://localhost:15672/api/queues/%2f/@
# To also delete exchanges uncomment next line
# curl -sSL -u $USER:$PASSWORD http://localhost:15672/api/exchanges/%2f/ | jq '.[].name' | sed 's/"//g' | xargs -L 1 -I@ curl -XDELETE -sSL -u $USER:$PASSWORD http://localhost:15672/api/exchanges/%2f/@
Note: This only works with the default vhost /
回答14:
To list queues,
./rabbitmqadmin -f tsv -q list queues
To delete a queue,
./rabbitmqadmin delete queue name=name_of_queue
回答15:
Here is a faster version (using parallel install sudo apt-get install parallel) expanding on the excellent answer by @admenva
parallel -j 50 rabbitmqadmin -H YOUR_HOST_OR_LOCALHOST -q delete queue name={} ::: $(rabbitmqadmin -H YOUR_HOST_OR_LOCALHOST -f tsv -q list queues name)
回答16:
This commands deletes all your queues
python rabbitmqadmin.py \
-H YOURHOST -u guest -p guest -f bash list queues | \
xargs -n1 | \
xargs -I{} \
python rabbitmqadmin.py -H YOURHOST -u guest -p guest delete queue name={}
This script is super simple because it uses -f bash, which outputs the queues as a list.
Then we use xargs -n1 to split that up into multiple variables
Then we use xargs -I{} that will run the command following, and replace {} in the command.
回答17:
You need not reset rabbitmq server to delete non-durable queues. Simply stop the server and start again and it will remove all the non-durable queues available.
回答18:
For whose have a problem with installing rabbitmqadmin, You should firstly install python.
UNIX-like operating system users need to copy rabbitmqadmin to a directory in PATH, e.g. /usr/local/bin.
Windows users will need to ensure Python is on their PATH, and invoke rabbitmqadmin as python.exe rabbitmqadmin.
Then
- Browse to
http://{hostname}:15672/cli/rabbitmqadminto download. - Go to the containing folder then run cmd with administrator privilege
To list Queues
python rabbitmqadmin list queues.
To delete Queue
python rabbitmqadmin delete queue name=Name_of_queue
To Delete all Queues
1- Declare Policy
python rabbitmqadmin declare policy name='expire_all_policies' pattern=.* definition={\"expires\":1} apply-to=queues
2- Remove the policy
python rabbitmqadmin delete policy name='expire_all_policies'
回答19:
There's a way to remove all queues and exchanges without scripts and full reset. You can just delete and re-create a virtual host from admin interface. This will work even for vhost /.
The only thing you'll need to restore is permissions for the newly created vhost.
回答20:
Okay, important qualifier for this answer:
The question does ask to use either rabbitmqctl OR rabbitmqadmin to solve this, my answer needed to use both. Also, note that this was tested on MacOS 10.12.6 and the versions of the rabbitmqctl and rabbitmqadmin that are installed when installing rabbitmq with Homebrew and which is identified with brew list --versions as rabbitmq 3.7.0
rabbitmqctl list_queues -p <VIRTUAL_HOSTNAME> name | sed 1,2d | xargs -I qname rabbitmqadmin --vhost <VIRTUAL_HOSTNAME> delete queue name=qname
回答21:
Another option is to delete the vhost associated with the queues. This will delete everything associated with the vhost, so be warned, but it is easy and fast.
NOTE: the RabbitMQ team monitors the rabbitmq-users mailing list and only sometimes answers questions on StackOverflow.
回答22:
I tried the above pieces of code but I did not do any streaming.
sudo rabbitmqctl list_queues | awk '{print $1}' > queues.txt; for line in $(cat queues.txt); do sudo rabbitmqctl delete_queue "$line"; done.
I generate a file that contains all the queue names and loops through it line by line to the delete them. For the loops, while read ... did not do it for me. It was always stopping at the first queue name.
回答23:
rabbitmqadmin list queues|awk 'NR>3{print $4}'|head -n-1|xargs -I qname rabbitmqadmin delete queue name=qname
来源：https://stackoverflow.com/questions/11459676/delete-all-the-queues-from-rabbitmq