Translating Elliptic Curve parameters (BC to MS)

问题

I'm trying to generate ECDSA self-signed certificate as described in generate certificate using ECDSA. Putting all pieces from bartonjs's answer together and using Net.Framework 4.7 (or Net.Core 2.0) following code seems to be working although there are some ambiguities (at least one) left:

I'm not sure how to properly convert private key ('D' parameter) from BC-BigInteger to MS-byte[]. Using BigInteger.ToByteArray() throws exception:

CryptographicException: The specified key parameters are not valid. Q.X and Q.Y are required fields. Q.X, Q.Y must be the same length. If D is specified it must be the same length as Q.X and Q.Y for named curves or the same length as Order for explicit curves.

while validating ECParameters (method ECParameters.Validate()). Using BigInteger.ToByteArrayUnsigned() provides much better results (one failure on several hundred generated key-pairs), but still...

When using ToByteArray() converted 'D' is usually one byte longer ('D' has 33 bytes vs D.X and D.Y has 32 bytes). Using ToByteArrayUnsigned() the 'D' is sometimes one byte shorter.

So my question is whether is is ok to use ToByteArrayUnsigned().

private const string NCryptExportPolicyProperty = "Export Policy";
private const string SignatureAlgorithm = "Sha256WithECDSA";
private static readonly ECCurve MsCurve = ECCurve.NamedCurves.nistP256;
private static readonly DerObjectIdentifier BcCurve = SecObjectIdentifiers.SecP256r1; // must correspond with MsCurve

public static X509Certificate2 Create()
{    
    // 1. generate keys:
    IAsymmetricCipherKeyPairGenerator bcKeyGen = GeneratorUtilities.GetKeyPairGenerator("ECDSA");
    bcKeyGen.Init(new ECKeyGenerationParameters(BcCurve, new SecureRandom()));

    ECPrivateKeyParameters bcPrivKey;
    ECPublicKeyParameters bcPublKey;

    bool validated;
    ECParameters msEcp;
    do
    {
        AsymmetricCipherKeyPair bcKeyPair = bcKeyGen.GenerateKeyPair();
        bcPrivKey = (ECPrivateKeyParameters)bcKeyPair.Private;
        bcPublKey = (ECPublicKeyParameters)bcKeyPair.Public;

        // 2. ensure generated bc-keys can be translated to cng (see exception below)
        msEcp = new ECParameters();
        msEcp.Curve = MsCurve;
        msEcp.D = bcPrivKey.D.ToByteArrayUnsigned(); // or bcPrivKey.D.ToByteArray() ??
        msEcp.Q.X = bcPublKey.Q.XCoord.GetEncoded();
        msEcp.Q.Y = bcPublKey.Q.YCoord.GetEncoded();

        try
        {
            msEcp.Validate();
            validated = true;
        }
        catch (Exception e)
        {
            // Validate() occasionally throws CryptographicException: 
            // The specified key parameters are not valid. Q.X and Q.Y are required fields. Q.X, Q.Y must be the same length. If D is specified it must be the same length as Q.X and Q.Y for named curves or the same length as Order for explicit curves.
            // e.g.: D = 31, Q.X = 32, Q.Y = 32.
            validated = false;
            Console.WriteLine("D = {0}, Q.X = {1}, Q.Y = {2}. {3}: {4}", msEcp.D.Length, msEcp.Q.X.Length, msEcp.Q.Y.Length, e.GetType().Name, e.Message);
        }
    } while (!validated);

    // 3. create x509 certificate:
    X509V3CertificateGenerator bcCertGen = new X509V3CertificateGenerator();
    bcCertGen.SetPublicKey(bcPublKey);
    // .. set subject, validity period etc
    ISignatureFactory sigFac = new Asn1SignatureFactory(SignatureAlgorithm, bcPrivKey);
    Org.BouncyCastle.X509.X509Certificate bcX509Cert = bcCertGen.Generate(sigFac);
    byte[] x509CertEncoded = bcX509Cert.GetEncoded();

    X509Certificate2 msNewCert;

    // 4. use translated (and validated) parameters:
    using (ECDsaCng msEcdsa = new ECDsaCng())
    {
        msEcdsa.ImportParameters(msEcp);

        CngKey msPrivateKey = msEcdsa.Key;

        // 5. make private key exportable:
        byte[] bytes = BitConverter.GetBytes((int)(CngExportPolicies.AllowExport | CngExportPolicies.AllowPlaintextExport));
        CngProperty pty = new CngProperty(NCryptExportPolicyProperty, bytes, CngPropertyOptions.Persist);
        msPrivateKey.SetProperty(pty);

        // 6. tie keys together:
        using (X509Certificate2 msPubCertOnly = new X509Certificate2(x509CertEncoded))
        {
            msNewCert = MateECDsaPrivateKey(msPubCertOnly, msPrivateKey); // method from bartonjs's answer
        }
    }

    return msNewCert;
}

Thank you in advance

回答1:

When you are getting too many bytes (33 in this case) the first byte should be 0x00, and you need to remove it. When you are getting too few (technically speaking D=1 is valid) you need to insert zeros to fill the array out.

The reason is that .NET's structure expects D to look like it does to the underlying Windows CNG import API, which means that D is a fixed-with unsigned big endian big integer. BouncyCastle is giving you the BER INTEGER encoding, which requires inserting a 0x00 byte when the high bit of the most significant byte (bytes[0], big endian) is set in a number that should be considered positive.

BER also has a rule that the minimum number of bytes be used, which is why sometimes BouncyCastle gives a number that's too small.

Q.X and Q.Y are okay because the ECPoint encoding rules specify a fixed size big endian integer whose size is determined by the curve; which is why BouncyCastle has the GetEncoded method instead of just ToByteArrayUnsigned.

private static byte[] FixSize(byte[] input, int expectedSize)
{
    if (input.Length == expectedSize)
    {
        return input;
    }

    byte[] tmp;

    if (input.Length < expectedSize)
    {
        tmp = new byte[expectedSize];
        Buffer.BlockCopy(input, 0, tmp, expectedSize - input.Length, input.Length);
        return tmp;
    }

    if (input.Length > expectedSize + 1 || input[0] != 0)
    {
        throw new InvalidOperationException();
    }

    tmp = new byte[expectedSize];
    Buffer.BlockCopy(input, 1, tmp, 0, expectedSize);
    return tmp;
}

...

msEcp = new ECParameters();
msEcp.Curve = MsCurve;
msEcp.Q.X = bcPublKey.Q.XCoord.GetEncoded();
msEcp.Q.Y = bcPublKey.Q.YCoord.GetEncoded();
msEcp.D = FixSize(bcPrivKey.D.ToByteArrayUnsigned(), msEcp.Q.X.Length);

来源：https://stackoverflow.com/questions/48542233/translating-elliptic-curve-parameters-bc-to-ms