问题
I want to match feature points in stereo images. I've already found and extracted the feature points with different algorithms and now I need a good matching. In this case I'm using the FAST algorithms for detection and extraction and the BruteForceMatcher for matching the feature points.
The matching code:
vector< vector<DMatch> > matches;
//using either FLANN or BruteForce
Ptr<DescriptorMatcher> matcher = DescriptorMatcher::create(algorithmName);
matcher->knnMatch( descriptors_1, descriptors_2, matches, 1 );
//just some temporarily code to have the right data structure
vector< DMatch > good_matches2;
good_matches2.reserve(matches.size());
for (size_t i = 0; i < matches.size(); ++i)
{
good_matches2.push_back(matches[i][0]);
}
Because there are a lot of false matches I caluclated the min and max distance and remove all matches that are too bad:
//calculation of max and min distances between keypoints
double max_dist = 0; double min_dist = 100;
for( int i = 0; i < descriptors_1.rows; i++ )
{
double dist = good_matches2[i].distance;
if( dist < min_dist ) min_dist = dist;
if( dist > max_dist ) max_dist = dist;
}
//find the "good" matches
vector< DMatch > good_matches;
for( int i = 0; i < descriptors_1.rows; i++ )
{
if( good_matches2[i].distance <= 5*min_dist )
{
good_matches.push_back( good_matches2[i]);
}
}
The problem is, that I either get a lot of false matches or only a few right ones (see the images below).
(source: codemax.de)
(source: codemax.de)
I think it's not a problem of programming but more a matching thing. As far as I understood the BruteForceMatcher only regards the visual distance of feature points (which is stored in the FeatureExtractor), not the local distance (x&y position), which is in my case important, too. Has anybody any experiences with this problem or a good idea to improve the matching results?
EDIT
I changed the code, that it gives me the 50 best matches. After this I go through the first match to check, whether it's in a specified area. If it's not, I take the next match until I have found a match inside the given area.
vector< vector<DMatch> > matches;
Ptr<DescriptorMatcher> matcher = DescriptorMatcher::create(algorithmName);
matcher->knnMatch( descriptors_1, descriptors_2, matches, 50 );
//look if the match is inside a defined area of the image
double tresholdDist = 0.25 * sqrt(double(leftImageGrey.size().height*leftImageGrey.size().height + leftImageGrey.size().width*leftImageGrey.size().width));
vector< DMatch > good_matches2;
good_matches2.reserve(matches.size());
for (size_t i = 0; i < matches.size(); ++i)
{
for (int j = 0; j < matches[i].size(); j++)
{
//calculate local distance for each possible match
Point2f from = keypoints_1[matches[i][j].queryIdx].pt;
Point2f to = keypoints_2[matches[i][j].trainIdx].pt;
double dist = sqrt((from.x - to.x) * (from.x - to.x) + (from.y - to.y) * (from.y - to.y));
//save as best match if local distance is in specified area
if (dist < tresholdDist)
{
good_matches2.push_back(matches[i][j]);
j = matches[i].size();
}
}
I think I don't get more matches, but with this I'm able to remove more false matches:
(source: codemax.de)
回答1:
An alternate method of determining high-quality feature matches is the ratio test proposed by David Lowe in his paper on SIFT (page 20 for an explanation). This test rejects poor matches by computing the ratio between the best and second-best match. If the ratio is below some threshold, the match is discarded as being low-quality.
std::vector<std::vector<cv::DMatch>> matches;
cv::BFMatcher matcher;
matcher.knnMatch(descriptors_1, descriptors_2, matches, 2); // Find two nearest matches
vector<cv::DMatch> good_matches;
for (int i = 0; i < matches.size(); ++i)
{
const float ratio = 0.8; // As in Lowe's paper; can be tuned
if (matches[i][0].distance < ratio * matches[i][1].distance)
{
good_matches.push_back(matches[i][0]);
}
}
回答2:
By comparing all feature detection algorithms I found a good combination, which gives me a lot more matches. Now I am using FAST for feature detection, SIFT for feature extraction and BruteForce for the matching. Combined with the check, whether the matches is inside a defined region I get a lot of matches, see the image:
(source: codemax.de)
The relevant code:
Ptr<FeatureDetector> detector;
detector = new DynamicAdaptedFeatureDetector ( new FastAdjuster(10,true), 5000, 10000, 10);
detector->detect(leftImageGrey, keypoints_1);
detector->detect(rightImageGrey, keypoints_2);
Ptr<DescriptorExtractor> extractor = DescriptorExtractor::create("SIFT");
extractor->compute( leftImageGrey, keypoints_1, descriptors_1 );
extractor->compute( rightImageGrey, keypoints_2, descriptors_2 );
vector< vector<DMatch> > matches;
Ptr<DescriptorMatcher> matcher = DescriptorMatcher::create("BruteForce");
matcher->knnMatch( descriptors_1, descriptors_2, matches, 500 );
//look whether the match is inside a defined area of the image
//only 25% of maximum of possible distance
double tresholdDist = 0.25 * sqrt(double(leftImageGrey.size().height*leftImageGrey.size().height + leftImageGrey.size().width*leftImageGrey.size().width));
vector< DMatch > good_matches2;
good_matches2.reserve(matches.size());
for (size_t i = 0; i < matches.size(); ++i)
{
for (int j = 0; j < matches[i].size(); j++)
{
Point2f from = keypoints_1[matches[i][j].queryIdx].pt;
Point2f to = keypoints_2[matches[i][j].trainIdx].pt;
//calculate local distance for each possible match
double dist = sqrt((from.x - to.x) * (from.x - to.x) + (from.y - to.y) * (from.y - to.y));
//save as best match if local distance is in specified area and on same height
if (dist < tresholdDist && abs(from.y-to.y)<5)
{
good_matches2.push_back(matches[i][j]);
j = matches[i].size();
}
}
}
回答3:
Besides ratio test, you can:
Only use symmetric matches:
void symmetryTest(const std::vector<cv::DMatch> &matches1,const std::vector<cv::DMatch> &matches2,std::vector<cv::DMatch>& symMatches)
{
symMatches.clear();
for (vector<DMatch>::const_iterator matchIterator1= matches1.begin();matchIterator1!= matches1.end(); ++matchIterator1)
{
for (vector<DMatch>::const_iterator matchIterator2= matches2.begin();matchIterator2!= matches2.end();++matchIterator2)
{
if ((*matchIterator1).queryIdx ==(*matchIterator2).trainIdx &&(*matchIterator2).queryIdx ==(*matchIterator1).trainIdx)
{
symMatches.push_back(DMatch((*matchIterator1).queryIdx,(*matchIterator1).trainIdx,(*matchIterator1).distance));
break;
}
}
}
}
and since its a stereo image use ransac test:
void ransacTest(const std::vector<cv::DMatch> matches,const std::vector<cv::KeyPoint>&keypoints1,const std::vector<cv::KeyPoint>& keypoints2,std::vector<cv::DMatch>& goodMatches,double distance,double confidence,double minInlierRatio)
{
goodMatches.clear();
// Convert keypoints into Point2f
std::vector<cv::Point2f> points1, points2;
for (std::vector<cv::DMatch>::const_iterator it= matches.begin();it!= matches.end(); ++it)
{
// Get the position of left keypoints
float x= keypoints1[it->queryIdx].pt.x;
float y= keypoints1[it->queryIdx].pt.y;
points1.push_back(cv::Point2f(x,y));
// Get the position of right keypoints
x= keypoints2[it->trainIdx].pt.x;
y= keypoints2[it->trainIdx].pt.y;
points2.push_back(cv::Point2f(x,y));
}
// Compute F matrix using RANSAC
std::vector<uchar> inliers(points1.size(),0);
cv::Mat fundemental= cv::findFundamentalMat(cv::Mat(points1),cv::Mat(points2),inliers,CV_FM_RANSAC,distance,confidence); // confidence probability
// extract the surviving (inliers) matches
std::vector<uchar>::const_iterator
itIn= inliers.begin();
std::vector<cv::DMatch>::const_iterator
itM= matches.begin();
// for all matches
for ( ;itIn!= inliers.end(); ++itIn, ++itM)
{
if (*itIn)
{ // it is a valid match
goodMatches.push_back(*itM);
}
}
}
来源：https://stackoverflow.com/questions/17967950/improve-matching-of-feature-points-with-opencv