问题
I understand the old Struts and Springs method of aligning, sizing and distributing views in Interface Builder. However, I cannot seem to figure out how to evenly distribute views using auto layout with Xcode 5. There was a way to do it using Xcode 4, but that option is gone.
I have 7 buttons arranged in a vertical stack. On a 3.5" layout, it looks great. When I preview the screen in the 4" layout, all of the buttons remain tightly packed and there is a large amount of space below the last button.
I want them to stay the same height, but I want the space between them to be able flex so they can spread out across the screen.
I've been able to get the height of the buttons to flex and fill the space, but that is not my desired behavior. I would like to learn how to use Auto Layout to replace my old Springs behavior, but I can't seem to find any way to do it through Interface Builder.
I'm ok with the top button either being a fixed space from the top edge or a proportional space from the top edge, likewise for the bottom button and the bottom edge. Those are less important to me, I'm good with either.
But I really need to figure out how to evenly distribute the extra space between each of the items in the view.
回答1:
EDIT Note that in iOS 9 this technique will become unnecessary, because a UIStackView will perform distribution automatically. I'll add another answer explaining how that works.
How to Perform Even Distribution Using Autolayout
The simplest way to do this in Interface Builder alone (rather than constructing constraints in code) is to use "spacer" views:
Position the top and bottom buttons absolutely.
Place spacer views between all the buttons. Use constraints to position them horizontally (centering them horizontally is simplest) and to set their widths.
Make constraints between each button and the spacer view above and below it, with a Constant of 0.
Now select all the spacer views and set their heights to be equal.
The first screen shot shows me setting this up in IB:
I have deliberately not corrected for the "misplaced views" because I want you to see what it looks like while I'm designing the constraints. Here's the result on both a 4 inch and a 3.5 inch screen:
I have left the spacer views black, just to show you how this technique works, but of course in real life you would make them transparent and hence invisible! So the user sees just your buttons, evenly distributed on either height of screen.
The reason for the use of this technique is that although the notion of equality performs the distribution of values you are asking for, constraints can apply equality only between aspects of views; thus we need the extra views (the spacer views) so that we have things we can make equal to other things (here, the heights of the spacer views).
Other Approaches
Obviously, a more flexible approach is to assign the constraints in code. This may sound daunting, but there's a lot of third-party code out there to help you, such as this sort of thing.
For example, if we have a (possibly invisible) superview whose height acts as a boundary to dictate maximum vertical distribution of our four buttons, we can pin their tops to the vertical center of that superview with a constant
of 0
but a multiplier
of 0.000001
, 0.666667
, 1.33333
, and 2.0
respectively (if we have four buttons); now the buttons will stay vertically distributed even as the superview changes size in response to screen height or whatever. [In Xcode 5.1, it will be possible to set that up in Interface Builder, but in earlier versions of Xcode it is not possible.]
回答2:
In iOS 9 / Xcode 7 this problem will be trivially solved in IB. Simply select the buttons (or whatever it is you want to distribute vertically) and choose Editor > Embed In > Stack View. Then you simply configure the stack view:
Provide constraints that position and size the stack view itself. For example, pin the four edges of the stack view to the four edges of its superview.
Set the stack view's attributes. In this case we want Vertical axis, Fill alignment, Equal Spacing distribution.
That's all! However, you may be curious about how this works, because it is still possible to do the same thing manually in code. A stack view performs distribution, not by inserting spacer views, but by inserting spacer guides. A guide (a UILayoutGuide) is a lightweight object that behaves like a view for purposes of layout constraints, but is not a view and therefore doesn't have to be made invisible and doesn't carry any of the overhead of a view.
To illustrate, I'll do in code what the stack view is doing. Presume we have four views to distribute vertically. We assign them constraints for everything but their distribution:
They all have absolute height constraints
Their left is pinned to the superview's left, and their right is pinned to the superview's right
The top view's top is pinned to the superview's top, and the bottom view's bottom is pinned to the superview's bottom
Now, presume we have references to the four views as views
, an array. Then:
let guides = [UILayoutGuide(), UILayoutGuide(), UILayoutGuide()]
for guide in guides {
self.view.addLayoutGuide(guide)
}
NSLayoutConstraint.activateConstraints([
// guide heights are equal
guides[1].heightAnchor.constraintEqualToAnchor(guides[0].heightAnchor),
guides[2].heightAnchor.constraintEqualToAnchor(guides[0].heightAnchor),
// guide widths are arbitrary, let's say 10
guides[0].widthAnchor.constraintEqualToConstant(10),
guides[1].widthAnchor.constraintEqualToConstant(10),
guides[2].widthAnchor.constraintEqualToConstant(10),
// guide left is arbitrary, let's say superview margin
guides[0].leftAnchor.constraintEqualToAnchor(self.view.leftAnchor),
guides[1].leftAnchor.constraintEqualToAnchor(self.view.leftAnchor),
guides[2].leftAnchor.constraintEqualToAnchor(self.view.leftAnchor),
// bottom of each view is top of following guide
views[0].bottomAnchor.constraintEqualToAnchor(guides[0].topAnchor),
views[1].bottomAnchor.constraintEqualToAnchor(guides[1].topAnchor),
views[2].bottomAnchor.constraintEqualToAnchor(guides[2].topAnchor),
// top of each view is bottom of preceding guide
views[1].topAnchor.constraintEqualToAnchor(guides[0].bottomAnchor),
views[2].topAnchor.constraintEqualToAnchor(guides[1].bottomAnchor),
views[3].topAnchor.constraintEqualToAnchor(guides[2].bottomAnchor)
])
(Obviously I could make that code cuter and shorter using loops, but I have deliberately unrolled the loops for clarity, so that you can see the pattern and the technique.)
来源:https://stackoverflow.com/questions/20864823/springs-in-auto-layout-distribute-views-evenly-with-constraints-in-xcode-5