Euler to Quaternion / Quaternion to Euler using Eigen

老子叫甜甜 提交于 2019-12-20 14:43:54

问题


I'm trying to implement a functionality that can convert an Euler angle into an Quaternion and back "YXZ"-convention using Eigen. Later this should be used to let the user give you Euler angles and rotate around as Quaternion and convert Back for the user. In fact i am realy bad at math but tried my best. I have no Idea if this matrices are correct or anything. The code Works, but my results are way to off, i suppose. Any idea where i take the wrong turn? This is what my Quat.cpp looks like:

#include "Quat.h"
#include <Eigen/Geometry>
#include <Eigen/Dense>
#include <cmath>
#include <iostream>

using namespace Eigen;

Vector3f Quat::MyRotation(const Vector3f YPR)
{
    Matrix3f matYaw(3, 3), matRoll(3, 3), matPitch(3, 3), matRotation(3, 3);
    const auto yaw = YPR[2]*M_PI / 180;
    const auto pitch = YPR[0]*M_PI / 180;
    const auto roll = YPR[1]*M_PI / 180;

    matYaw << cos(yaw), sin(yaw), 0.0f,
        -sin(yaw), cos(yaw), 0.0f,  //z
        0.0f, 0.0f, 1.0f;

    matPitch << cos(pitch), 0.0f, -sin(pitch),
        0.0f, 1.0f, 0.0f,   // X
        sin(pitch), 0.0f, cos(pitch);

    matRoll << 1.0f, 0.0f, 0.0f,
        0.0f, cos(roll), sin(roll),   // Y
        0.0f, -sin(roll), cos(roll);

    matRotation = matYaw*matPitch*matRoll;

    Quaternionf quatFromRot(matRotation);

    quatFromRot.normalize(); //Do i need to do this?

    return Quat::toYawPitchRoll(quatFromRot);
}

Vector3f Quat::toYawPitchRoll(const Eigen::Quaternionf& q)
{
    Vector3f retVector;

    const auto x = q.y();
    const auto y = q.z();
    const auto z = q.x();
    const auto w = q.w();

    retVector[2] = atan2(2.0 * (y * z + w * x), w * w - x * x - y * y + z * z);
    retVector[1] = asin(-2.0 * (x * z - w * y));
    retVector[0] = atan2(2.0 * (x * y + w * z), w * w + x * x - y * y - z * z);

#if 1
    retVector[0] = (retVector[0] * (180 / M_PI));
    retVector[1] = (retVector[1] * (180 / M_PI))*-1;
    retVector[2] = retVector[2] * (180 / M_PI);
#endif
    return retVector;
}

Input: x = 55.0, y = 80.0, z = 12.0 Quaternion: w:0.872274, x: -0.140211, y:0.447012, z:-0.140211 Return Value: x:-55.5925, y: -6.84901, z:-21.8771 The X-Value seems about right disregarding the prefix, but Y and z are off.


回答1:


From Euler to Quaternion:

using namespace Eigen;
//Roll pitch and yaw in Radians
float roll = 1.5707, pitch = 0, yaw = 0.707;    
Quaternionf q;
q = AngleAxisf(roll, Vector3f::UnitX())
    * AngleAxisf(pitch, Vector3f::UnitY())
    * AngleAxisf(yaw, Vector3f::UnitZ());
std::cout << "Quaternion" << std::endl << q.coeffs() << std::endl;

From Quaternion to Euler:

auto euler = q.toRotationMatrix().eulerAngles(0, 1, 2);
std::cout << "Euler from quaternion in roll, pitch, yaw"<< std::endl << euler << std::endl;

Taken from https://eigen.tuxfamily.org/dox/classEigen_1_1AngleAxis.html




回答2:


Here's one approach (not tested):

  Vector3d euler = quaternion.toRotationMatrix().eulerAngles(2, 1, 0);
  yaw = euler[0]; pitch = euler[1]; roll = euler[2];



回答3:


When I use

auto euler = q.toRotationMatrix().eulerAngles(0, 1, 2)

It can not work perfectly all the time, the euler angle always has a regular beat (the actual value and the calculated value have a deviation of ±π). For example, read and show yaw angle by rqt picture.

I have no idea about this, but I find ros tf::getYaw() also can achieve "Quaternion to Euler" (because I just need yaw angle).



来源:https://stackoverflow.com/questions/31589901/euler-to-quaternion-quaternion-to-euler-using-eigen

易学教程内所有资源均来自网络或用户发布的内容,如有违反法律规定的内容欢迎反馈
该文章没有解决你所遇到的问题?点击提问,说说你的问题,让更多的人一起探讨吧!