问题
I have been trying to implement a primitive serial file transfer protocol in C this past week and I've come across a really weird problem which I can't seem to find the solution for online. I've managed to transfer binary data over the serial port and receive it but in the process, all the "0D" bytes are converted to "0A". The following is my code.
#include <stdlib.h>
#include <stdio.h> /* Standard input/output definitions */
#include <string.h> /* String function definitions */
#include <unistd.h> /* UNIX standard function definitions */
#include <fcntl.h> /* File control definitions */
#include <errno.h> /* Error number definitions */
#include <signal.h>
#include <sys/ioctl.h>
#include <termios.h>
//eventually plan to set up a proper communication protocol
#define ACK 0x01
#define NAK 0x00
int setAttribs (int fd, int speed, int parity);
unsigned char* readFile(char* filename, int* file_size);
int main(void){
//set up ports
int fd = 0, r = 0, i = 0;
fd = open("/dev/ttyUSB0", O_RDWR | O_NOCTTY | O_NDELAY);//sending port
if(fd<0){
perror("open port ttyUSB0 failed");
return -1;
}
setAttribs(fd,1500000,0);
int rd =0, file_size=0, bytes=0;
rd = open("/dev/ttyUSB1", O_RDWR | O_NOCTTY | O_NDELAY);//receiving port
setAttribs(rd,1500000,0);
//create file to which the binary data will be written
FILE *newFile;
newFile = fopen("t.bin","wb");
if(newFile<0){
printf("open file failed\n");
return -1;
}
//This character array will hold the file to be transferred
unsigned char* data = '\0';
data = readFile("t.odt", &file_size);
ioctl(rd, TCFLSH, &bytes);//port flush which does not seem to work
do{
//write data in 1024 byte chunks
write(fd,data+i,1024);
//wait for write to finish
usleep(8500);
//buffer to hold received bytes
unsigned char buffer[1024];
//ensure buffer is empty
memset(buffer,0,1024);
//read in 1024 byte chunks
read(rd, buffer, 1024);
//printing bytes in the buffer to check for errors
for(r=0;r<1024;r++){
if(r%16==0)
printf("\n");
printf("%02X ", buffer[r]);
}
//write to file in 1024 byte chunks
fwrite(buffer, 1,1024,newFile);
//increase counter
i+=1024;
}while(i<8197);//its an 8088 byte file
printf("Done!\n");
return 0;
}
unsigned char* readFile(char* filename, int* file_size){
unsigned char *buffer = NULL;
int string_size, i;
FILE *handler = fopen(filename, "rb");
if (handler)
{
// Seek the last byte of the file
fseek(handler, 0, SEEK_END);
// Offset from the first to the last byte, or in other words, filesize
string_size = ftell(handler);
printf("File length: %d\n",string_size);
*file_size = string_size;
// go back to the start of the file
rewind(handler);
// Allocate a string that can hold it all
buffer = (unsigned char*) malloc(sizeof(unsigned char) * (string_size + 1) );
// Read it all in one operation
for(i=0;i<string_size;i++){
fread(buffer+i, sizeof(unsigned char),1, handler);
if(i%16==0)
printf("\n");
printf("%02X ",*(buffer+i));
}
// fread doesn't set it so put a \0 in the last position
// and buffer is now officially a string
// buffer[string_size] = '\0';
printf("Finished read\n");
// Always remember to close the file
fclose(handler);
}
return buffer;
}
int setAttribs (int fd, int speed, int parity)
{
struct termios tty;
memset (&tty, 0, sizeof tty);
if (tcgetattr (fd, &tty) != 0)
{
fputs("error %d from tcgetattr", stderr);
}
cfsetospeed (&tty, speed);
cfsetispeed (&tty, speed);
tty.c_cflag = (tty.c_cflag & ~CSIZE) | CS8; // 8-bit chars
// disable IGNBRK for mismatched speed tests; otherwise receive break
// as \000 chars
tty.c_iflag &= ~IGNBRK; // disable break processing
tty.c_lflag = 0; // no signaling chars, no echo,
// no canonical processing
tty.c_oflag = 0; // no remapping, no delays
tty.c_cc[VMIN] = 0; // read doesn't block
tty.c_cc[VTIME] = 5; // 0.5 seconds read timeout
tty.c_iflag &= ~(IXON | IXOFF | IXANY); // shut off xon/xoff ctrl
tty.c_cflag |= (CLOCAL | CREAD);// ignore modem controls,
// enable reading
tty.c_cflag &= ~(PARENB | PARODD); // shut off parity
tty.c_cflag |= parity;
tty.c_cflag &= ~CSTOPB;
tty.c_cflag &= ~CRTSCTS;
if (tcsetattr (fd, TCSANOW, &tty) != 0)
{
fputs("error %d from tcsetattr", stderr);
}
return 1;
}
All it does is write to a USB-Serial converter in one port and read through the one in the other. I was just testing it with an ODT file which is 8088 bytes (Hello World) and was trying out different baudrates and write block sizes. After some trial and error, I found that this configuration (1500000 bps and 1024 byte blocks) was both fast and relatively more reliable. The only errors are as shown below.
Transmitted bytes: 70 6E 67 89 50 4E 47 0D 0A 1A 0A 00 00 00 0D 49
Received bytes: 70 6E 67 89 50 4E 47 0A 0A 1A 0A 00 00 00 0A 49
As you can see all the "0D" bytes are changed to "0A". I've tried lower baudrates and smaller block sizes and the problem persists. I understand that they are the carriage return and line feed values respectively and that line feed is used as a control value for asynchronous communication in Linux; but I don't get why that would affect the carriage return values. Is there some special significance for carriage return in serial communication? Is there a way to send "0D" byte across in that case?
TL;DR: Raw serial communication results in "0D" bytes being replaced with "0A". Any idea why? Any way to solve?
回答1:
Thank you so much it worked!! I never knew that there was the ICRNL option which translates line feeds to carriage returns. Once I set that and others off with
tty.c_iflag &= ~(IGNBRK | BRKINT | PARMRK | ISTRIP | INLCR | IGNCR | ICRNL | IXON); //tty is the name of the struct termios
it was golden.
来源：https://stackoverflow.com/questions/42209980/serial-port-binary-transfer-changes-carriage-return