How can I avoid flicker in a WPF fullscreen app?

问题

I have a WPF application that is a fullscreen kiosk app. It's actually a pretty complicated app at this point, but here's some code that shows the basic idea. Essentially, whenever the user goes from one screen to the next, there's some serious flicker going on bringing up the new window. In severe cases, the desktop is displayed for a few seconds before the new screen shows up. That doesn't happen in this sample code, because it's so simple, but add a few more buttons and styles and you'll see it.

App.xaml.cs:

public partial class App : Application {
    Manager mManager;
    public App() {
        mManager = new Manager();
        Window1 screen1 = new Window1(mManager);
        mManager.Screen1 = screen1;
        try {
            this.Run(screen1);
        } catch (Exception e) {
            System.Console.WriteLine(e.ToString());                
        } finally {
            Application.Current.Shutdown();
        }
    }
}

Window1.xaml.cs:

public partial class Window1 : Window {
    Manager Manager{get; set;}
    public Window1(Manager inManager) {
        InitializeComponent();
        Manager = inManager;
    }

    private void OnChangeScreen(object sender, RoutedEventArgs e) {
        Manager.OpenScreen2();
    }
}

Window2.xaml.cs:

public partial class Window2 : Window {
    Manager Manager{get; set;}
    public Window2(Manager inManager) {
        InitializeComponent();
        Manager = inManager;
    }

    private void OnChangeScreen(object sender, RoutedEventArgs e) {
        Manager.OpenScreen1();
    }
}

Manager.cs:

public class Manager {
    public Window1 Screen1{ get; set;}
    public Window2 Screen2{ get; set;}

    public Manager(){
        Screen1 = new Window1(this);
    }

    public void OpenScreen2() {
        Screen2 = new Window2(this);
        Screen2.Show();
        if (Screen1 != null) {
            Screen1.Hide();
        }
    }

    public void OpenScreen1() {
        Screen1 = new Window1(this);
        Screen1.Show();
        if (Screen2 != null) {
            Screen2.Hide();
        }
    }
}

Window1.xaml (essentially mimicked by window2.xaml):

<Window x:Class="WpfApplication1.Window1"
    xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
    xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
    Title="Window1" 
        WindowStyle="None"
        WindowState="Maximized"
        Width="1280"
        Height="1024"
        FontFamily="Global User Interface"
        ResizeMode="NoResize">

    <Grid>
        <Grid.ColumnDefinitions>
            <ColumnDefinition></ColumnDefinition>
            <ColumnDefinition></ColumnDefinition>
            <ColumnDefinition></ColumnDefinition>
            <ColumnDefinition></ColumnDefinition>
        </Grid.ColumnDefinitions>
        <Grid.RowDefinitions>
            <RowDefinition></RowDefinition>
            <RowDefinition></RowDefinition>
            <RowDefinition></RowDefinition>
            <RowDefinition></RowDefinition>
        </Grid.RowDefinitions>
        <Button Name="ChangeScreenButton" Click="OnChangeScreen" Grid.Row="2" Grid.Column="2" Content="Toggle Screen 2"></Button>
    </Grid>
</Window>

Interleaving the displays of the two windows (ie, showing window 1 before deleting window 2, etc) does not change the flickering behavior. In this simple app, it would be possible to just hide the other screens that aren't shown, but in the more complicated app, there's just too much state information to manage screen information properly and easily.

Is there some magic codeword or technique to avoid flicker that would work in this simple app that also scales to the more complex app? I'm worried that I'll be forced to rewrite the entire UI at this point to support hiding and showing, and that's just not feasible in my timeframe.

EDIT: I've tried the hide/show thing on some dialogs, and it just doesn't seem to matter. Maybe it's because the main kiosk app is style heavy?

回答1:

The underlying cause of the flicker is that whenever you .Hide() a window its PresentationSource is disconnected, causing Unloaded events to be fired on everything and everything cached in the MILCore layer of WPF to be discarded. Then when you .Show() it again later, everything is rebuilt.

To prevent flicker, make sure you keep your UI connected to a PresentationSource at all times. This can be done in several ways:

Single window with a disguised TabControl

Use a single window containing a TabControl styled so you can't see the tabs. Switch tabs in code when you would normally show or hide windows. You can simply search-and-replace "Window" in your existing code with "Page", then replace "Show()" calls to your custom "Show()" which does the following:

Check for previously created TabItem for this Page (using a Dictionary)
If no TabItem found, wrap the Page inside a new TabItem and add it to the TabControl
Switch the TabControl to the new TabItem

The ContentTemplate you would use for your TabControl is extremely simple:

<ContentTemplate TargetType="TabControl">
  <ContentPresenter x:Name="PART_SelectedContentHost"
                    ContentSource="SelectedContent" />
</ContentTemplate>

Using a Frame with Navigation

Using Frame with Navigation is a very good solution for a kiosk because it implements a lot of the page switching and other functionality. However it may be more work to update an existing application this way than to use a TabControl. In either case you need to convert from Window to Page, but with Frame you also need to deal with navigation.

Multiple windows with opacity

You can make a window almost completely invisible using a low opacity and yet WPF will still keep the visual tree around. This would be a trivial change: Just replace all calls to Window.Show() and Window.Hide() with calls to "MyHide()" and "MyShow()" which updates the opacity. Note that you can improve this further by having these routines trigger animations of very short duration (eg 0.2 second) that animate the opacity. Since both animations will be set at the same time the animation will proceed smoothly and it will be a neat effect.

回答2:

I'm curious as to why you are using multiple windows for the same application in a Kiosk. You could easily put all of the controls on the same "Window" and simply change visibility on Panels to display different "screens". This would certainly prevent the desktop from ever being shown, and would allow you to do neat things like fade transitions or sliding animations, etc.

回答3:

WPF has built in navigation functionality.

Just look at the Frame and the Page classes which you can easily design using VS or Blend.

回答4:

Agreed with the comments about using the built-in navigation functionality, but if you're locked in to your design at this point, perhaps consider animating the opacity of your windows? A short 100 or 200 ms animation of Opacity from 1 -> 0 for the outgoing window and 0 -> 1 for the incoming window might resolve the issue. Handle the actual cleanup of the outgoing window in the Completed event on the storyboard.

回答5:

Seeing as how WPF uses DirectX and the Graphics Processor to offload processing of screen elements, are the computer's DirectX and drivers up to date?

Cory

回答6:

If you have any initialization in the constructor that takes a long time that could cause a delay and flicker. You could try using an asynchronous method or put that initialization on a background thread so that it does not block the showing of the window.

An example of something which would cause a delay would be a database query or a request for data over a network.

A quick experiment would be to disable parts of the constructor in a slow Window to find out what is causing delay in showing the Window.

回答7:

As answered earlier using Frames/Tab Controls avoid flicker during transitions

If you don't want to change your application and want to remove that flicker (flashing of desktop in between) on Windows7 or WindowsVista you can optimise your windows 'Visual Effects' setting to be 'Adjust for best performance'

回答8:

Here is an easy alternative that works for me in my kiosk-like application with a black background, inspired from above answers. Here I have a "LanguageWindow" that can be opened from anywhere in the application to change the current language.

In LanguageWindow.xaml (check the WindowState=Minimized):

<Window x:Class="LanguageWindow"
    ...
    Title="LanguageWindow" Height="1024" Width="1280" WindowStyle="None" WindowState="Minimized" Background="Black">

In LanguageWindow.xaml.vb:

Private Sub LanguageWindow_ContentRendered(sender As Object, e As EventArgs) Handles Me.ContentRendered
    Me.WindowState = WindowState.Maximized
End Sub

Voilà!

(done with Visual Studio 2015, .NET Framework 4.6, WPF, VB.net)

来源：https://stackoverflow.com/questions/2364340/how-can-i-avoid-flicker-in-a-wpf-fullscreen-app

标签

.net

wpf

flicker

fullscreen