问题
It appears that there is no concept of AUTO_INCREMENT in Oracle, up until and including version 11g.
How can I create a column that behaves like auto increment in Oracle 11g?
回答1:
There is no such thing as "auto_increment" or "identity" columns in Oracle as of Oracle 11g. However, you can model it easily with a sequence and a trigger:
Table definition:
CREATE TABLE departments (
ID NUMBER(10) NOT NULL,
DESCRIPTION VARCHAR2(50) NOT NULL);
ALTER TABLE departments ADD (
CONSTRAINT dept_pk PRIMARY KEY (ID));
CREATE SEQUENCE dept_seq START WITH 1;
Trigger definition:
CREATE OR REPLACE TRIGGER dept_bir
BEFORE INSERT ON departments
FOR EACH ROW
BEGIN
SELECT dept_seq.NEXTVAL
INTO :new.id
FROM dual;
END;
/
UPDATE:
IDENTITY column is now available on Oracle 12c:
create table t1 (
c1 NUMBER GENERATED by default on null as IDENTITY,
c2 VARCHAR2(10)
);
or specify starting and increment values, also preventing any insert into the identity column (GENERATED ALWAYS) (again, Oracle 12c+ only)
create table t1 (
c1 NUMBER GENERATED ALWAYS as IDENTITY(START with 1 INCREMENT by 1),
c2 VARCHAR2(10)
);
Alternatively, Oracle 12 also allows to use a sequence as a default value:
CREATE SEQUENCE dept_seq START WITH 1;
CREATE TABLE departments (
ID NUMBER(10) DEFAULT dept_seq.nextval NOT NULL,
DESCRIPTION VARCHAR2(50) NOT NULL);
ALTER TABLE departments ADD (
CONSTRAINT dept_pk PRIMARY KEY (ID));
回答2:
SYS_GUID returns a GUID-- a globally unique ID. A SYS_GUID is a RAW(16). It does not generate an incrementing numeric value.
If you want to create an incrementing numeric key, you'll want to create a sequence.
CREATE SEQUENCE name_of_sequence
START WITH 1
INCREMENT BY 1
CACHE 100;
You would then either use that sequence in your INSERT statement
INSERT INTO name_of_table( primary_key_column, <<other columns>> )
VALUES( name_of_sequence.nextval, <<other values>> );
Or you can define a trigger that automatically populates the primary key value using the sequence
CREATE OR REPLACE TRIGGER trigger_name
BEFORE INSERT ON table_name
FOR EACH ROW
BEGIN
SELECT name_of_sequence.nextval
INTO :new.primary_key_column
FROM dual;
END;
If you are using Oracle 11.1 or later, you can simplify the trigger a bit
CREATE OR REPLACE TRIGGER trigger_name
BEFORE INSERT ON table_name
FOR EACH ROW
BEGIN
:new.primary_key_column := name_of_sequence.nextval;
END;
If you really want to use SYS_GUID
CREATE TABLE table_name (
primary_key_column raw(16) default sys_guid() primary key,
<<other columns>>
)
回答3:
In Oracle 12c onward you could do something like,
CREATE TABLE MAPS
(
MAP_ID INTEGER GENERATED ALWAYS AS IDENTITY (START WITH 1 INCREMENT BY 1) NOT NULL,
MAP_NAME VARCHAR(24) NOT NULL,
UNIQUE (MAP_ID, MAP_NAME)
);
And in Oracle (Pre 12c).
-- create table
CREATE TABLE MAPS
(
MAP_ID INTEGER NOT NULL ,
MAP_NAME VARCHAR(24) NOT NULL,
UNIQUE (MAP_ID, MAP_NAME)
);
-- create sequence
CREATE SEQUENCE MAPS_SEQ;
-- create tigger using the sequence
CREATE OR REPLACE TRIGGER MAPS_TRG
BEFORE INSERT ON MAPS
FOR EACH ROW
WHEN (new.MAP_ID IS NULL)
BEGIN
SELECT MAPS_SEQ.NEXTVAL
INTO :new.MAP_ID
FROM dual;
END;
/
回答4:
Here are three flavors:
- numeric. Simple increasing numeric value, e.g. 1,2,3,....
- GUID. globally univeral identifier, as a
RAWdatatype. - GUID (string). Same as above, but as a string which might be easier to handle in some languages.
x is the identity column. Substitute FOO with your table name in each of the examples.
-- numerical identity, e.g. 1,2,3...
create table FOO (
x number primary key
);
create sequence FOO_seq;
create or replace trigger FOO_trg
before insert on FOO
for each row
begin
select FOO_seq.nextval into :new.x from dual;
end;
/
-- GUID identity, e.g. 7CFF0C304187716EE040488AA1F9749A
-- use the commented out lines if you prefer RAW over VARCHAR2.
create table FOO (
x varchar(32) primary key -- string version
-- x raw(32) primary key -- raw version
);
create or replace trigger FOO_trg
before insert on FOO
for each row
begin
select cast(sys_guid() as varchar2(32)) into :new.x from dual; -- string version
-- select sys_guid() into :new.x from dual; -- raw version
end;
/
update:
Oracle 12c introduces these two variants that don't depend on triggers:
create table mytable(id number default mysequence.nextval);
create table mytable(id number generated as identity);
The first one uses a sequence in the traditional way; the second manages the value internally.
回答5:
Assuming you mean a column like the SQL Server identity column?
In Oracle, you use a SEQUENCE to achieve the same functionality. I'll see if I can find a good link and post it here.
Update: looks like you found it yourself. Here is the link anyway: http://www.techonthenet.com/oracle/sequences.php
回答6:
Oracle Database 12c introduced Identity, an auto-incremental (system-generated) column. In the previous database versions (until 11g), you usually implement an Identity by creating a Sequence and a Trigger. From 12c onward, you can create your own Table and define the column that has to be generated as an Identity.
The following article explains how to use it:
Identity columns - A new entry in Oracle Database 12c
回答7:
Trigger and Sequence can be used when you want serialized number that anyone can easily read/remember/understand. But if you don't want to manage ID Column (like emp_id) by this way, and value of this column is not much considerable, you can use SYS_GUID() at Table Creation to get Auto Increment like this.
CREATE TABLE <table_name>
(emp_id RAW(16) DEFAULT SYS_GUID() PRIMARY KEY,
name VARCHAR2(30));
Now your emp_id column will accept "globally unique identifier value".
you can insert value in table by ignoring emp_id column like this.
INSERT INTO <table_name> (name) VALUES ('name value');
So, it will insert unique value to your emp_id Column.
回答8:
Starting with Oracle 12c there is support for Identity columns in one of two ways:
Sequence + Table - In this solution you still create a sequence as you normally would, then you use the following DDL:
CREATE TABLE MyTable (ID NUMBER DEFAULT MyTable_Seq.NEXTVAL, ...)
Table Only - In this solution no sequence is explicitly specified. You would use the following DDL:
CREATE TABLE MyTable (ID NUMBER GENERATED AS IDENTITY, ...)
If you use the first way it is backward compatible with the existing way of doing things. The second is a little more straightforward and is more inline with the rest of the RDMS systems out there.
回答9:
it is called Identity Columns and it is available only from oracle Oracle 12c
CREATE TABLE identity_test_tab
(
id NUMBER GENERATED ALWAYS AS IDENTITY,
description VARCHAR2 (30)
);
example of insert into Identity Columns as below
INSERT INTO identity_test_tab (description) VALUES ('Just DESCRIPTION');
1 row created.
you can NOT do insert like below
INSERT INTO identity_test_tab (id, description) VALUES (NULL, 'ID=NULL and DESCRIPTION');
ERROR at line 1: ORA-32795: cannot insert into a generated always identity column
INSERT INTO identity_test_tab (id, description) VALUES (999, 'ID=999 and DESCRIPTION');
ERROR at line 1: ORA-32795: cannot insert into a generated always identity column
useful link
回答10:
Here is complete solution w.r.t exception/error handling for auto increment, this solution is backward compatible and will work on 11g & 12c, specifically if application is in production.
Please replace 'TABLE_NAME' with your appropriate table name
--checking if table already exisits
BEGIN
EXECUTE IMMEDIATE 'DROP TABLE TABLE_NAME';
EXCEPTION WHEN OTHERS THEN NULL;
END;
/
--creating table
CREATE TABLE TABLE_NAME (
ID NUMBER(10) PRIMARY KEY NOT NULL,
.
.
.
);
--checking if sequence already exists
BEGIN
EXECUTE IMMEDIATE 'DROP SEQUENCE TABLE_NAME_SEQ';
EXCEPTION WHEN OTHERS THEN NULL;
END;
--creating sequence
/
CREATE SEQUENCE TABLE_NAME_SEQ START WITH 1 INCREMENT BY 1 MINVALUE 1 NOMAXVALUE NOCYCLE CACHE 2;
--granting rights as per required user group
/
GRANT SELECT, INSERT, UPDATE, DELETE ON TABLE_NAME TO USER_GROUP;
-- creating trigger
/
CREATE OR REPLACE TRIGGER TABLE_NAME_TS BEFORE INSERT OR UPDATE ON TABLE_NAME FOR EACH ROW
BEGIN
-- auto increment column
SELECT TABLE_NAME_SEQ.NextVal INTO :New.ID FROM dual;
-- You can also put some other required default data as per need of your columns, for example
SELECT SYS_CONTEXT('USERENV', 'SESSIONID') INTO :New.SessionID FROM dual;
SELECT SYS_CONTEXT('USERENV','SERVER_HOST') INTO :New.HostName FROM dual;
SELECT SYS_CONTEXT('USERENV','OS_USER') INTO :New.LoginID FROM dual;
.
.
.
END;
/
回答11:
This is how I did this on an existing table and column (named id):
UPDATE table SET id=ROWNUM;
DECLARE
maxval NUMBER;
BEGIN
SELECT MAX(id) INTO maxval FROM table;
EXECUTE IMMEDIATE 'DROP SEQUENCE table_seq';
EXECUTE IMMEDIATE 'CREATE SEQUENCE table_seq START WITH '|| TO_CHAR(TO_NUMBER(maxval)+1) ||' INCREMENT BY 1 NOMAXVALUE';
END;
CREATE TRIGGER table_trigger
BEFORE INSERT ON table
FOR EACH ROW
BEGIN
:new.id := table_seq.NEXTVAL;
END;
回答12:
FUNCTION GETUNIQUEID_2 RETURN VARCHAR2
AS
v_curr_id NUMBER;
v_inc NUMBER;
v_next_val NUMBER;
pragma autonomous_transaction;
begin
CREATE SEQUENCE sequnce
START WITH YYMMDD0000000001
INCREMENT BY 1
NOCACHE
select sequence.nextval into v_curr_id from dual;
if(substr(v_curr_id,0,6)= to_char(sysdate,'yymmdd')) then
v_next_val := to_number(to_char(SYSDATE+1, 'yymmdd') || '0000000000');
v_inc := v_next_val - v_curr_id;
execute immediate ' alter sequence sequence increment by ' || v_inc ;
select sequence.nextval into v_curr_id from dual;
execute immediate ' alter sequence sequence increment by 1';
else
dbms_output.put_line('exception : file not found');
end if;
RETURN 'ID'||v_curr_id;
END;
回答13:
FUNCTION UNIQUE2(
seq IN NUMBER
) RETURN VARCHAR2
AS
i NUMBER := seq;
s VARCHAR2(9);
r NUMBER(2,0);
BEGIN
WHILE i > 0 LOOP
r := MOD( i, 36 );
i := ( i - r ) / 36;
IF ( r < 10 ) THEN
s := TO_CHAR(r) || s;
ELSE
s := CHR( 55 + r ) || s;
END IF;
END LOOP;
RETURN 'ID'||LPAD( s, 14, '0' );
END;
回答14:
oracle has sequences AND identity columns in 12c
http://www.oracle-base.com/articles/12c/identity-columns-in-oracle-12cr1.php#identity-columns
I found this but not sure what rdb 7 is http://www.oracle.com/technetwork/products/rdb/0307-identity-columns-128126.pdf
回答15:
create trigger t1_trigger
before insert on AUDITLOGS
for each row
begin
select t1_seq.nextval into :new.id from dual;
end;
only I have to just change the table name (AUDITLOGS) with your table name and new.id with new.column_name
回答16:
Maybe just try this simple script:
http://www.hlavaj.sk/ai.php
Result is:
CREATE SEQUENCE TABLE_PK_SEQ;
CREATE OR REPLACE TRIGGER TR_SEQ_TABLE BEFORE INSERT ON TABLE FOR EACH ROW
BEGIN
SELECT TABLE_PK_SEQ.NEXTVAL
INTO :new.PK
FROM dual;
END;
来源：https://stackoverflow.com/questions/2053313/oracle-how-to-create-an-identity-column