问题
I am trying to perform read and write operations on a pen drive.
Details: Vendor ID: 8564 and Product ID: 1000. It is a Transcend JetFlash mass storage device.
I am keen to know that whether it is possible to achieve a read/write on a pen drive. If it is, then is it going to happen the way I have tried in the code provided below.
I have learnt the methods to get the device id, product id and endpoint addresses. This is what I have implemented.
Here the device is getting acknowledged and opened. And, even the interface claims it is successful.
But bulk transfer functions return -1.
What is the explanation?
#include <stdio.h>
#include <sys/types.h>
#include <string.h>
#include </usr/include/libusb-1.0/libusb.h>
#define BULK_EP_OUT 0x82
#define BULK_EP_IN 0x02
int main(void)
{
int r = 0, e = 0;
struct libusb_device_handle *handle = NULL;
struct libusb_device **devs;
struct libusb_device *dev;
struct libusb_device_descriptor desc;
char str1[256], str2[256];
/* Init libusb */
r = libusb_init(NULL);
if (r < 0)
{
printf("\nfailed to initialise libusb\n");
return 1;
}
handle = libusb_open_device_with_vid_pid(NULL, 0x8564, 0x1000);
if(handle == NULL)
{
printf("\nError in device opening!");
}
else
printf("\nDevice Opened");
// Tell libusb to use the CONFIGNUM configuration of the device
libusb_set_configuration(handle, 1);
if(libusb_kernel_driver_active(handle, 0) == 1)
{
printf("\nKernel Driver Active");
if(libusb_detach_kernel_driver(handle, 0) == 0)
printf("\nKernel Driver Detached!");
}
e = libusb_claim_interface(handle, 0);
if(e < 0)
{
printf("\nCannot Claim Interface");
}
else
printf("\nClaimed Interface");
/* Communicate */
int bytes_read;
int nbytes = 256;
unsigned char *my_string, *my_string1;
int transferred = 0;
my_string = (unsigned char *) malloc (nbytes + 1);
my_string1 = (unsigned char *) malloc (nbytes + 1);
strcpy(my_string, "divesd");
printf("\nTo be sent : %s", my_string);
e = libusb_bulk_transfer(handle, BULK_EP_OUT, my_string, bytes_read, &transferred, 5000);
printf("\nXfer returned with %d", e);
printf("\nSent %d bytes with string: %s\n", transferred, my_string);
libusb_bulk_transfer(handle, BULK_EP_IN, my_string1, 256, &transferred, 5000);
printf("\nXfer returned with %d", e); //It returns -1... This is an error, I guess.
printf("\nReceived %d bytes with string: %s\n", transferred, my_string1);
e = libusb_release_interface(handle, 0);
libusb_close(handle);
libusb_exit(NULL);
return 0;
}
回答1:
Try the code given below and it should work on LPC2148. I have tested this with an LPC2148 configured to receive an interrupt from USB after a write happens (from user-space) and the RTC starts running.
Answering to your question whether it involves a kernel driver in read/write or not: As far as I have studied, you have to detach the kernel driver and claim the interface using libusb APIs. Though I am not sure whether it can be done without detaching it or not.
#include <stdio.h>
#include <stdlib.h>
#include <sys/types.h>
#include <string.h>
#include </usr/local/include/libusb-1.0/libusb.h>
#define BULK_EP_OUT 0x82
#define BULK_EP_IN 0x08
int interface_ref = 0;
int alt_interface, interface_number;
int print_configuration(struct libusb_device_handle *hDevice, struct libusb_config_descriptor *config)
{
char *data;
int index;
data = (char *)malloc(512);
memset(data, 0, 512);
index = config->iConfiguration;
libusb_get_string_descriptor_ascii(hDevice, index, data, 512);
printf("\nInterface Descriptors: ");
printf("\n\tNumber of Interfaces: %d", config->bNumInterfaces);
printf("\n\tLength: %d", config->bLength);
printf("\n\tDesc_Type: %d", config->bDescriptorType);
printf("\n\tConfig_index: %d", config->iConfiguration);
printf("\n\tTotal length: %lu", config->wTotalLength);
printf("\n\tConfiguration Value: %d", config->bConfigurationValue);
printf("\n\tConfiguration Attributes: %d", config->bmAttributes);
printf("\n\tMaxPower(mA): %d\n", config->MaxPower);
free(data);
data = NULL;
return 0;
}
struct libusb_endpoint_descriptor* active_config(struct libusb_device *dev, struct libusb_device_handle *handle)
{
struct libusb_device_handle *hDevice_req;
struct libusb_config_descriptor *config;
struct libusb_endpoint_descriptor *endpoint;
int altsetting_index, interface_index=0, ret_active;
int i, ret_print;
hDevice_req = handle;
ret_active = libusb_get_active_config_descriptor(dev, &config);
ret_print = print_configuration(hDevice_req, config);
for (interface_index=0;interface_index<config->bNumInterfaces;interface_index++)
{
const struct libusb_interface *iface = &config->interface[interface_index];
for (altsetting_index=0; altsetting_index<iface->num_altsetting; altsetting_index++)
{
const struct libusb_interface_descriptor *altsetting = &iface->altsetting[altsetting_index];
int endpoint_index;
for(endpoint_index=0; endpoint_index<altsetting->bNumEndpoints; endpoint_index++)
{
const struct libusb_endpoint_desriptor *ep = &altsetting->endpoint[endpoint_index];
endpoint = ep;
alt_interface = altsetting->bAlternateSetting;
interface_number = altsetting->bInterfaceNumber;
}
printf("\nEndPoint Descriptors: ");
printf("\n\tSize of EndPoint Descriptor: %d", endpoint->bLength);
printf("\n\tType of Descriptor: %d", endpoint->bDescriptorType);
printf("\n\tEndpoint Address: 0x0%x", endpoint->bEndpointAddress);
printf("\n\tMaximum Packet Size: %x", endpoint->wMaxPacketSize);
printf("\n\tAttributes applied to Endpoint: %d", endpoint->bmAttributes);
printf("\n\tInterval for Polling for data Tranfer: %d\n", endpoint->bInterval);
}
}
libusb_free_config_descriptor(NULL);
return endpoint;
}
int main(void)
{
int r = 1;
struct libusb_device **devs;
struct libusb_device_handle *handle = NULL, *hDevice_expected = NULL;
struct libusb_device *dev, *dev_expected;
struct libusb_device_descriptor desc;
struct libusb_endpoint_descriptor *epdesc;
struct libusb_interface_descriptor *intdesc;
ssize_t cnt;
int e = 0, config2;
int i = 0, index;
char str1[64], str2[64];
char found = 0;
// Init libusb
r = libusb_init(NULL);
if(r < 0)
{
printf("\nFailed to initialise libusb\n");
return 1;
}
else
printf("\nInit successful!\n");
// Get a list of USB devices
cnt = libusb_get_device_list(NULL, &devs);
if (cnt < 0)
{
printf("\nThere are no USB devices on the bus\n");
return -1;
}
printf("\nDevice count: %d\n-------------------------------\n", cnt);
while ((dev = devs[i++]) != NULL)
{
r = libusb_get_device_descriptor(dev, &desc);
if (r < 0)
{
printf("Failed to get device descriptor\n");
libusb_free_device_list(devs, 1);
libusb_close(handle);
break;
}
e = libusb_open(dev, &handle);
if (e < 0)
{
printf("Error opening device\n");
libusb_free_device_list(devs, 1);
libusb_close(handle);
break;
}
printf("\nDevice Descriptors: ");
printf("\n\tVendor ID: %x", desc.idVendor);
printf("\n\tProduct ID: %x", desc.idProduct);
printf("\n\tSerial Number: %x", desc.iSerialNumber);
printf("\n\tSize of Device Descriptor: %d", desc.bLength);
printf("\n\tType of Descriptor: %d", desc.bDescriptorType);
printf("\n\tUSB Specification Release Number: %d", desc.bcdUSB);
printf("\n\tDevice Release Number: %d", desc.bcdDevice);
printf("\n\tDevice Class: %d", desc.bDeviceClass);
printf("\n\tDevice Sub-Class: %d", desc.bDeviceSubClass);
printf("\n\tDevice Protocol: %d", desc.bDeviceProtocol);
printf("\n\tMax. Packet Size: %d", desc.bMaxPacketSize0);
printf("\n\tNumber of Configurations: %d\n", desc.bNumConfigurations);
e = libusb_get_string_descriptor_ascii(handle, desc.iManufacturer, (unsigned char*) str1, sizeof(str1));
if (e < 0)
{
libusb_free_device_list(devs, 1);
libusb_close(handle);
break;
}
printf("\nManufactured: %s", str1);
e = libusb_get_string_descriptor_ascii(handle, desc.iProduct, (unsigned char*) str2, sizeof(str2));
if(e < 0)
{
libusb_free_device_list(devs, 1);
libusb_close(handle);
break;
}
printf("\nProduct: %s", str2);
printf("\n----------------------------------------");
if(desc.idVendor == 0xffff && desc.idProduct == 0x4)
{
found = 1;
break;
}
}//end of while
if(found == 0)
{
printf("\nDevice NOT found\n");
libusb_free_device_list(devs, 1);
libusb_close(handle);
return 1;
}
else
{
printf("\nDevice found");
dev_expected = dev;
hDevice_expected = handle;
}
e = libusb_get_configuration(handle, &config2);
if(e!=0)
{
printf("\n***Error in libusb_get_configuration\n");
libusb_free_device_list(devs, 1);
libusb_close(handle);
return -1;
}
printf("\nConfigured value: %d", config2);
if(config2 != 1)
{
libusb_set_configuration(handle, 1);
if(e!=0)
{
printf("Error in libusb_set_configuration\n");
libusb_free_device_list(devs, 1);
libusb_close(handle);
return -1;
}
else
printf("\nDevice is in configured state!");
}
libusb_free_device_list(devs, 1);
if(libusb_kernel_driver_active(handle, 0) == 1)
{
printf("\nKernel Driver Active");
if(libusb_detach_kernel_driver(handle, 0) == 0)
printf("\nKernel Driver Detached!");
else
{
printf("\nCouldn't detach kernel driver!\n");
libusb_free_device_list(devs, 1);
libusb_close(handle);
return -1;
}
}
e = libusb_claim_interface(handle, 0);
if(e < 0)
{
printf("\nCannot Claim Interface");
libusb_free_device_list(devs, 1);
libusb_close(handle);
return -1;
}
else
printf("\nClaimed Interface\n");
active_config(dev_expected, hDevice_expected);
// Communicate
char *my_string, *my_string1;
int transferred = 0;
int received = 0;
int length = 0;
my_string = (char *)malloc(nbytes + 1);
my_string1 = (char *)malloc(nbytes + 1);
memset(my_string, '\0', 64);
memset(my_string1, '\0', 64);
strcpy(my_string, "Prasad Divesd");
length = strlen(my_string);
printf("\nTo be sent: %s", my_string);
e = libusb_bulk_transfer(handle, BULK_EP_IN, my_string, length, &transferred, 0);
if(e == 0 && transferred == length)
{
printf("\nWrite successful!");
printf("\nSent %d bytes with string: %s\n", transferred, my_string);
}
else
printf("\nError in write! e = %d and transferred = %d\n", e, transferred);
sleep(3);
i = 0;
for(i = 0; i < length; i++)
{
e = libusb_bulk_transfer(handle, BULK_EP_OUT, my_string1, 64, &received, 0); //64: Max Packet Length
if(e == 0)
{
printf("\nReceived: ");
printf("%c", my_string1[i]); //Will read a string from LPC2148
sleep(1);
}
else
{
printf("\nError in read! e = %d and received = %d\n", e, received);
return -1;
}
}
e = libusb_release_interface(handle, 0);
libusb_close(handle);
libusb_exit(NULL);
printf("\n");
return 0;
}
来源：https://stackoverflow.com/questions/14772152/read-write-on-a-pen-drive-using-libusb-libusb-bulk-transfer