iPhone and WireShark [closed]

问题

Closed. This question needs to be more focused. It is not currently accepting answers.

---

Want to improve this question? Update the question so it focuses on one problem only by editing this post.

Closed last year.

How can I sniff packets from my iPhone on my network? can someone give me some instructions? I tried Googling, but nothing teaches how to sniff iPhone packets、

I am on windows.

回答1:

You can use Paros to sniff the network traffic from your iPhone. See this excellent step by step post for more information: http://blog.jerodsanto.net/2009/06/sniff-your-iphones-network-traffic/. Also, look in the comments for some advice for using other proxies to get the same job done.

One caveat is that Paras only sniffs HTTP GET/POST requests using the method above, so to sniff all network traffic, try the following:

1. Just turn on network sharing over WiFi and run a packet sniffer like Cocoa Packet Analyzer (in OSX).
2. Then connect to the new network from iPhone over WiFi. (SystemPreferences->Sharing->InternetSharing)

If you're after sniffing these packets on Windows, connect to the internet using Ethernet, share your internet connection, and use the Windows computer as your access point. Then, just run Wireshark as normal and intercept the packets flowing through, filtering by their startpoints. Alternatively, try using a network hub as Wireshark can trace all packets flowing through a network if they are using the same router endpoint address (as in a hub).

回答2:

This worked for me:

1. Connect your iOS device by USB

2. $ rvictl -s UDID where UDID is the UDID of your device (located in XCode under Devices, shortcut to with ⇧⌘2)

3. $ sudo launchctl list com.apple.rpmuxd

4. $ sudo tcpdump -n -t -i rvi0 -q tcp or $ sudo tcpdump -i rvi0 -n

If victl is not working install Xcode and the developer tools.

For more info see Remote Virtual Interface and for the original tutorial here's the Use Your Loaf blog post

回答3:

I have successfully captured HTTP traffic using Fiddler2 as a proxy, which can be installed on any Windows PC on your network.

1. In Fiddler, Tools -> Fiddler Options -> Connections -> [x] Allow remote computers to connect.
2. Make sure your windows firewall is disabled.
3. On the iphone/ipod, go to your wireless settings, use a manual proxy server, enter the fiddler machine's ip address and the same port (defaults to 8888).

回答4:

The following worked for iPhone 4S (iOS 5) and Macbook Pro (10.8.2)

1. On your Mac, go to System Preferences > Sharing > Internet Sharing

   

2. On your iPhone, go to Settings > Wifi and choose your Mac as the Wifi Access Point. Press the blue detail disclosure next to it to and note down the IP Address (192.168.2.2 in my case). At this point, the wifi icon on Mac's your taskbar should change to the following:

   

3. Open wireshark. Click on start capture, and use the new bridge interface that should now be available among the options.

   

4. ???

5. Profit!

As with all stuff networking related, you might have to restart wifi etc and repeat steps and invoke your favorite deity to get this incantation working :)

回答5:

I had to do something very similar to find out why my iPhone was bleeding cellular network data, eating 80% of my 500Mb allowance in a couple of days.

Unfortunately I had to packet sniff whilst on 3G/4G and couldn't rely on being on wireless. So if you need an "industrial" solution then this is how you sniff all traffic (not just http) on any network.

Basic recipe:

1. Install VPN server
2. Run packet sniffer on VPN server
3. Connect iPhone to VPN server and perform operations
4. Download .pcap from VPN server and use your favourite .pcap analyser on it.

Detailed'ish instructions:

1. Get yourself a linux server, I used Fedora 20 64bit from Digirtal Ocean on a $5/month box
2. Configure OpenVPN on it. OpenVPN has comprehensive instructions
3. Ensure you configure the Routing all traffic through the VPN section
4. Be aware the instructions for (3) are all iptables which has been superseded, at time of writing, by firewall-cmd. This website explains the firewall-cmd to use
5. Check that you can connect your iPhone to the VPN. I did this by downloading the free OpenVPN software. I then set up a OpenVPN certificate. You can embed your ca, crt & key files by opening up and embedding the --- BEGIN CERTIFACTE --- ---- END CERTIFICATE --- in < ca > < /ca > < crt >< /crt>< key > < /key > blocks. Note that I had to do this in Mac with text editor, when I used notepad.exe on Win it didn't work. I then emailed this to my iphone and picked installed it.
6. Check the iPhone connects to VPN and routes it's traffic through (google what's my IP should return the VPN server IP when you run it on iPhone)
7. Now that you can connect go to your linux server & install wireshark (yum install wireshark)
8. This installs tshark, which is a command line packet sniffer. Run this in the background with screen tshark -i tun0 -x -w capture.pcap -F pcap (assuming vpn device is tun0)
9. Now when you want to capture traffic simply start the VPN on your machine
10. When complete switch off the VPN
11. Download the .pcap file from your server, and run analysis as you normally would. It's been decrypted on the server when it arrives so the traffic is viewable in plain text (obviously https still encrypted)

Note that the above implementation is not security focussed it's simply about getting a detailed packet capture of all of your iPhone's traffic on 3G/4G/Wireless networks

回答6:

The tcpdump tool is available under gnu.

You can use it instead of wireshark.

回答7:

I recommend Charles Web Proxy

Charles is an HTTP proxy / HTTP monitor / Reverse Proxy that enables a developer to view all of the HTTP and SSL / HTTPS traffic between their machine and the Internet. This includes requests, responses and the HTTP headers (which contain the cookies and caching information).

• SSL Proxying – view SSL requests and responses in plain text
• Bandwidth Throttling to simulate slower Internet connections including latency
• AJAX debugging – view XML and JSON requests and responses as a tree or as text
• AMF – view the contents of Flash Remoting / Flex Remoting messages as a tree
• Repeat requests to test back-end changes, Edit requests to test different inputs
• Breakpoints to intercept and edit requests or responses
• Validate recorded HTML, CSS and RSS/atom responses using the W3C validator

It's cross-platform, written in JAVA, and pretty good. Not nearly as overwhelming as Wireshark, and does a lot of the annoying stuff like setting up the proxies, etc. for you. The only bad part is that it costs money, $50 at that. Not cheap, but a useful tool.

Read more about Charles's features.

回答8:

The easiest way of doing this will be to use wifi of course. You will need to determine if your wifi base acts as a hub or a switch. If it acts as a hub then just connect your windows pc to it and wireshark should be able to see all the traffic from the iPhone. If it is a switch then your easiest bet will be to buy a cheap hub and connect the wan side of your wifi base to the hub and then connect your windows pc running wireshark to the hub as well. At that point wireshark will be able to see all the traffic as it passes over the hub.

回答9:

I like to use Pirni (availble for free in Cydia on a jailbroken device), or there's also Pirni Pro now for a few bucks (http://en.wikipedia.org/wiki/Pirni). I've been using the pirni-derv script available for free on Google Code (http://code.google.com/p/pirni-derv/) mixed with Pirni and it's been working very well. I recommend it.

回答10:

You can proceed as follow:

1. Install Charles Web Proxy.
2. Disable SSL proxying (uncheck the flag in Proxy->Proxy Settings...->SSL
3. Connect your iDevice to the Charles proxy, as explained here
4. Sniff the packets via Wireshark or Charles

来源：https://stackoverflow.com/questions/1598407/iphone-and-wireshark