application loader stuck at the stage of “Authenticating with the iTunes Store”

问题

I was about to upload an app to iTunes connect,but the application loader has been stuck at the stage of "Authenticating with the iTunes Store" and pending for almost an hour.Network is fine and I have never seen this before.Has anybody encountered this kind of issue? what is the solution?thanks in advance.

回答1:

I had this problem when behind a firewall.

I got around it by editing:

/Applications/Xcode.app/Contents/Applications/Application\ Loader.app/Contents/MacOS/itms/java/lib/net.properties 

If you do not find net.properties in above mentioned path then try, as it is changed now.

/Applications/Xcode.app/Contents/Applications/Application\ Loader.app/Contents/itms/java/lib/net.properties 

Change the line:

# https.proxyPort=443

To:

https.proxyPort=80

This enables the application to use the HTTP port for HTTPS. Worked straight away after this. Hope this helps.

回答2:

To be honest, this may not be an answer but it really worked for me.

1. I launched Application Loader and started submitting. While sumbitting was going on,
2. I launched Organiser and select Distribution over archiver in Xcode as well and started uploading concurrent.

They worked together and 2nd one completed the submission.

Just my experience.

回答3:

I tried many solutions like using port 80 for https connection but none of the solution worked for me.

https.proxyPort=443

to https.proxyPort=80

Whenever I face this issue, I upload application from two different instances of application loader and it works like a charm.

I have two different versions of application loader on my machine, one came with XCode4 and one came with XCode5. It always works if I upload application from two instances simultaneously.

回答4:

I was quite frustrated by this - not only by the problem itself but the uncertainty till when I need to wait to call it "It won't - try again." - at which point I will quit the Application Loader app, re-package my ipa file and try again. Probably with a port change to net.properties file. But it didn't always work the same way as it did last time. So I am writing it here, mostly for the sake of myself!

I was about to just call another day thrown when this worked, almost like a charm:

1) Open file. Applications > Xcode > Contents > Applications > Application Loader > Contents > MacOS > itms > java > lib - net.properties

2) Change the line:

# https.proxyPort=<whatever>

to

 https.proxyPort=80

Make sure that you do not uncomment # https.proxyHost= - just leave it as shown (commented).

3) Start Application Loader. Follow usual steps and start uploading your ipa using Send command.

4) If it seems to be getting past "“Authenticating with the iTunes Store” in reasonable time (say 10 minutes at which time my patience ran out) - you are lucky. Go sleep or hang out.

5) Launch Xcode Organizer. Select your archive and click Distribute button. It will show slanting progress lines for couple of minutes. If it doesn't stop, kill Xcode and retry.

6) After about 2 slant minutes, the blue solid progress will appear, and there flies your "Flappy Bird"...! (mine was neither Flappy nor Bird)

(Keep the Application Loader alive, just for the sake of having it around, I don't know if it's useful anymore, but I am just superstitious)

• Workarounds apart, this is something Apple must fix before releasing iOS 8 or iPhone 6. Seriously. If they don't, I am not wasting my $100 next year.

(Or - will this bug be still around to prevent those "Flappy" clones from flooding the app store, forever?)

回答5:

Tested with xCode 5: In my case nor organizer or application loader worked: they got stacked in “Authenticating with the iTunes Store”.

I solved it sending the app by application Loader, and when it got to the “Authenticating with the iTunes Store” I opened the organizer and upload the app: application Loader and organizer sending the app at the same time.

It seems that something is going in my router port configuration and my computer can not receive the answer from itunes store saying that authentication was successful. Maybe the process is this way:

1- Application loader request authentication.

2- Itunes store authentication is done but application loader never receives the answer. [But it is authenticated anyway!]

3- Organizer sends the app because it is already authenticated by application loader.

回答6:

I solved this problem by starting second instance of Application Loader while first instance saying "Authenticating with the App Store...". You can start second instance of Application Loader from Terminal using:

open -n -a "Application Loader"

回答7:

Try use another internet connection. I have the same problem when try upload app via Wi-Fi. Nothing helps me, but when I disable Wi-Fi and try do it via EDGE on my iPhone, everything is works!

回答8:

You may give a try to application uploader. Yesterday me too faced this problem and even application upload didn't work for me then I tried this:

For uploading it via XCode:

Step1: Firstly Validate your archive file by clicking on validation button of Organiser.

Step2: Then Upload it to App Store via Oraganiser. By clicking on distribute and then first option and so on.

it really worked for me

回答9:

If validation is successful while uploading through organiser then it must be network issue. Application loader uses some specific ports including port 443. If any of those ports are blocked by your internet service provider or on your local network then application loader can stuck. Certain applications also block these ports. If you are running Skype close it. If it does not work then this solution worked for me finally. Make modifications in net.properties file. You can access this file by going to Application folder via terminal.Then move into Xcode.app with cd Xcode.app next

Contents with cd Contents next

Application Loader.app with cd Application\ Loader.app next

Contents/MaxOS/itms/java/lib

Now you find net.properties.

Now write sudo pico net.properties and add following lines in the file

https.ProxyHost=

https.ProxyPort=

https.ProxyUser=

https.ProxyPassword=

Now launch application loader to upload you ipa file and it will work like a charm.

回答10:

Sometimes it is the network trick. Connecting to different network may solve this problem.

I tried both the two ways(Xcode/application uploader) at home, neither worked.

Then, I brought my macbook from home to library, it finished uploading within 3~5 minutes there(via application uploader).

回答11:

Contents/MaxOS/itms/java/lib

Now you find net.properties. Edit that with your favourite text editor. Add the below lines

https.ProxyHost=

https.ProxyPort=

https.ProxyUser=

https.ProxyPassword=

You may have problem uploading through app store via xcode if you have slow internet connection, but using Application loader you can achieve the submission.

回答12:

We tried lot of things which is giving in this and other posts, but it did not work.

Finally we gave the IPA file to the client to upload it via Application Loader from his end. And it worked.

So, I would strongly suggest that if your app validates fine and it still remains struck in Authentication, then rather than trying out anything, just try uploading it from totally different network in different geography.

That will save you lot of time and headaches.

回答13:

All i did was duplicate my Application Loader.app in /Applications and ran both Application loaders at the same time.

回答14:

Simple use this command in terminal it worked for me:

1. cd 
2. ~mv .itmstransporter/.old_itmstransporter/
3. "/Applications/Xcode.app/Contents/Applications/Application Loader.app/Contents/itms/bin/iTMSTransporter"

回答15:

I faced similar issue today while uploading .ipa via application loader which was opened directly from spotlight. Every time it was passing all the steps but getting stuck at Authentication. (AL Version 2.9)

After dozens of failed trials, I launched Xcode and opened application loader from Xcode (AL Version 2.8) and repeated earlier step. Interestingly it failed at first checking step itself! It said it had some issue with certificate .. so followed all the steps again to get new certificates in itunesconnect and on mac. (if some one wants.. here are good instructions with pics)

It got authenticated and the binary file uploaded fine.

回答16:

I tried many things including the suggestion provided here. Once I re-login in "Application Loader" to restart the delivery. The package passed the authentication stage and start uploading. Maybe "Application Loader" needs to revalidate your authentication but can't say it loud.

回答17:

This happened to me today. I shutdown my Mac and then tried the application loader after couple of hours.

It worked.

I guess it was a problem at iTunes Connect.

回答18:

I had the same issue. Trying all these answers may work sometimes, but usually it takes much time and may not work at the end like in my case.

I figured out a solution which will probably work for all.

• Create your .ipa file by: Product -> Arcive -> Disribute(Save for Enterprise or ...) -> Next and save .ipa at target

• Xcode -> Open Developer Tool -> Application Loader -> Deliver your app -> Pick your .ipa file

Withing few minutes your app will submit to iTunes. Good luck

回答19:

• Charles Proxy (or any other proxy) could have this effect.
• Review and accept any new terms in member center.

回答20:

Best and quickest fix I found is to copy 'Application Loader' from 'Applications' folder to desktop, run both 'Application Loaders' simultaneously.

Works like charm every time :)

回答21:

There is nothing wrong with server of any ports in my case. I have 9 MB of build. With good interenet speed it takes 5 minutes. I feel I got stucked. But after few minutes it uploaded successfully.

回答22:

I was missing the distribution signing entity. I created and it did work.

回答23:

After struggling for days with this problem the only working solution for me is to use the Application Loader with only the DAV protocol selected.

Application Loader -> Preferences -> Advanced -> Use only DAV.

The problem is due to my corporate network restrictions. DAV uses https so it's not blocked.

Solution found here: itunesconnect using application loader behind a firewall

回答24:

open terminal and run these commands

• cd ~
• mv .itmstransporter/ .old_itmstransporter/
• "/Applications/Xcode.app/Contents/Applications/Application Loader.app/Contents/itms/bin/iTMSTransporter" got it from here

回答25:

Hello Friends, Do not worry about it, Simply disable the bit code option in build Settings and make build and upload.

No need to do any extra work

Try this one

来源：https://stackoverflow.com/questions/18971710/application-loader-stuck-at-the-stage-of-authenticating-with-the-itunes-store