问题
I'm getting this error...
The semaphore timeout period has expired.
On this line...
ThePorts.ActivePort1.Open();
...but I only get it from time to time. When it happens, it happens over and over again. Then the problem goes away, for hours or days, then it comes back.
The serial port is a USB with a BlueTooth connected.
I think this guy was having a very similar problem, but not in C#
Freeze on SerialPort.Open / DeviceIoControl / GetcommState with usbser.sys
As best I can estimate, I have read his entire problem, and the resulting comments, and the answer, but I really can't figure out which one fixed his problem, or if C# is significantly different from what he was experiencing.
Thanks for any help for the clueless. This is the actual code where it's happening.
public static void Open_ActivePortWeWillUse(String Drone_StringNameFromUser)
{
SerialPort TempSerialPort = new SerialPort(Drone_StringNameFromUser, (int) SerialPortSpeed);
ThePorts.ActivePort1 = TempSerialPort;
ThePorts.ActivePort1.DataBits = 8;
ThePorts.ActivePort1.Parity = Parity.None;
ThePorts.ActivePort1.StopBits = StopBits.One;
ThePorts.ActivePort1.DataReceived += new SerialDataReceivedEventHandler(OurBackGroundSerialPortReceiver);
ThePorts.ActivePort1.Open(); // "Sometimes" Error hits here
}
回答1:
This error could also appear if you are having network latency or internet or local network problems. Bridged connections that have a failing counterpart may be the culprit as well.
回答2:
Okay, I am now connecting without the semaphore timeout problem.
If anyone reading ever encounters the same thing, I hope that this procedure works for you; but no promises; hey, it's windows.
In my case this was Windows 7
I got a little hint from This page on eHow; not sure if that might help anyone or not.
So anyway, this was the simple twenty three step procedure that worked for me
Click on start button
Choose Control Panel
From Control Panel, choose Device Manger
From Device Manager, choose Universal Serial Bus Controllers
From Universal Serial Bus Controllers, click the little sideways triangle
I cannot predict what you'll see on your computer, but on mine I get a long drop-down list
Begin the investigation to figure out which one of these members of this list is the culprit...
On each member of the drop-down list, right-click on the name
A list will open, choose Properties
Guesswork time: using the various tabs near the top of the resulting window which opens, make a guess if this is the USB adapter driver which is choking your stuff with semaphore timeouts
Once you have made the proper guess, then close the USB Root Hub Properties window (but leave the Device Manager window open).
Physically disonnect anything and everything from that USB hub.
Unplug it.
Return your mouse pointer to that USB Root Hub in the list which you identified earlier.
Right click again
Choose Uninstall
Let Windows do its thing
Wait a little while
Power Down the whole computer if you have the time; some say this is required. I think I got away without it.
Plug the USB hub back into a USB connector on the PC
If the list in the device manager blinks and does a few flash-bulbs, it's okay.
Plug the BlueTooth connector back into the USB hub
Let windows do its thing some more
Within two minutes, I had a working COM port again, no semaphore timeouts.
Hope it works for anyone else who may be having a similar problem.
回答3:
I had this problem as well on two different Windows computers when communicating with a Arduino Leonardo. The reliable solution was:
- Find the COM port in device manager and open the device properties.
- Open the "Port Settings" tab, and click the advanced button.
- There, uncheck the box "Use FIFO buffers (required 16550 compatible UART), and press OK.
Unfortunately, I don't know what this feature does, or how it affects this issue. After several PC restarts and a dozen device connection cycles, this is the only thing that reliably fixed the issue.
回答4:
Too many big files all in one go. Windows barfs. Essentially the copying took too long because you asked too much of the computer and the file locking was locked too long and set a flag off, the flag is a semaphore error.
The computer stuffed itself and choked on it. I saw the RAM memory here get progressively filled with a Cache in RAM. Then when filled the subsystem ground to a halt with a semaphore error.
I have a workaround; copy or transfer fewer files not one humongous block. Break it down into sets of blocks and send across the files one at a time, maybe a few at a time, but not never the lot.
References:
https://appuals.com/how-to-fix-the-semaphore-timeout-period-has-expired-0x80070079/
https://www-01.ibm.com/support/docview.wss?uid=swg21094630
来源：https://stackoverflow.com/questions/13999439/the-semaphore-timeout-period-has-expired-error-for-usb-connection