问题
I seem to be having issues with integrating Xcode6 with jenkins, I currently have this setup and working with Xcode 5.
With xcode 6 running remotely via SSH the simulator time-out, when I run locally it succeeds.
Command
xcodebuild -workspace PROJECTNAME.xcworkspace -scheme BGO_Tests -destination 'platform=iOS Simulator,name=iPhone 5s' -derivedDataPath ./Build clean test
2014-08-19 10:46:36.591 xcodebuild[33966:381f] iPhoneSimulator: Timed out waiting 120 seconds for >simulator to boot, current state is 1.
Testing failed: Test target BGO_Tests encountered an error (Timed out waiting 120 seconds for simulator to boot, current state is 1
Tested with recent Xcode 6 beta 6
回答1:
Note: the device names changed in Xcode 7, so you no longer specify them using iPhone 5 (9.1 Simulator) but rather iPhone 5 (9.1).
Use xcrun instruments -s to get the current list of devices and then you can pre-launch it using:
xcrun instruments -w "iPhone 5 (9.1)" || echo "(Pre)Launched the simulator."
Prelaunching
I got to a point where what I proposed down there wasn't working anymore. In addition to making the changes mentioned here, you need to launch the simulator xcodebuild is expecting BEFORE xcodebuild is ran:
# First get the UDID you need
xcrun instruments -s
# Then launch it
open -a "iOS Simulator" --args -CurrentDeviceUDID <sim device UDID>
# and wait some time....
sleep 5
# Then launch your unit tests
xcodebuild [...] -destination 'platform=iOS Simulator,name=<device name matching the UDID>'
Old post
This bug is fixed in Xcode 6.3 and above. If you are experiencing similar problems in newer Xcode, it's likely another bug.
Apple follow up regarding Bug ID# 18001199:
The context provided by LaunchDaemons is not supported for running GUI applications. The SSH service, and the default setup for Jenkins, are both implemented as LaunchDaemons. In earlier versions of Xcode 5 xcodebuild could run tests on the iOS simulator in this context, but that was never a supported configuration, and as you have noted that is no longer working as of Xcode 6.
Unlike LaunchDaemons, LaunchAgents provide a context where you can run GUI applications - if the user is logged in at the time, with a window server / Aqua session. Converting your Jenkins configuration from being a LaunchDaemon to being a LaunchAgent would avoid the reported issue. You can also use launchd for running tests on the iOS simulator from a SSH session, either by crafting a LaunchAgent and manually loading / starting that, or by using "launchctl submit”.
Ok, after some more digging around the comments around here (many thanks to Opal), I found out that launching the slave via JNLP instead works.
As many people mentioned, it is not currently possible to run the unit test over SSH, so you might want to turn towards the JNLP agent for now until Apple fixes it.
If connecting with JNLP still does not solve it, try the solution mentioned in this comment.
i.e.: Run these on command line:
DevToolsSecurity -enable
sudo dscl . -append /Groups/_developer GroupMembership "user-that-runs-the-sim"
security authorizationdb write system.privilege.taskport is-developer
See References here and here.
I've recently found out that if you install a new version of Xcode and do not launch it. The simulator might start timing out again. To solve this, I've had to manually launch Xcode, and install the additional tools it requested.
回答2:
I ended up solving this on Xcode 5 by doing the steps here, essentially running:
sudo security authorizationdb write system.privilege.taskport allow
This will eliminate one class of these authentication popups. You’ll also need to run:
sudo DevToolsSecurity -enable
However, once I upgraded to Xcode 6, I now get an infinite hang when trying to run xcodebuild tests over SSH. They continue to run just fine as long as I'm logged into the console, and running them from the keyboard.
回答3:
I ran into the same issue. My working theory is that SSH on OSX is started as a LaunchDaemon, and LaunchDaemons are not allowed to present a UI; Reference.
I was able to work around the issue by using Java Web Start to launch the Jenkins slave. I then installed the Jenkins slave as a launchd service.
Unfortunately the Jenkins slave then installs itself as a -you've guessed it- LaunchDaemon, leading to the exact same problem of not being able to launch the tests; Reference.
I worked around that issue by moving the Jenkins Slave LaunchDaemon plist and jar files in /System/Library/LaunchDaemons into ~/Library/LaunchAgents, and updated the paths inside the plist file.
That finally allowed me to run XCode6 (Beta6) tests on an OSX jenkins slave.
回答4:
I finally managed to find a good simple solution. JNLP was causing numerous issues with our jenkins server.
Workaround for SSH timeout via https://corner.squareup.com/2015/07/ios-build-infrastructure.html
"Mavericks (10.9) and Yosemite (10.10) determine if a process can access accessibility hooks via the parentage of the accessing process. By putting launchd in the list of allowed processes, processes launched via SSH or Jenkins have access to the accessibility hooks across the system. To do this you can modify the TCC database, per this gist. A reboot is required to make the change take effect."
#!/bin/bash
# This will add lauchd to the list of allowed processes for accessibility access
sudo sqlite3 /Library/Application\ Support/com.apple.TCC/TCC.db "INSERT or REPLACE INTO access VALUES('kTCCServiceAccessibility','/sbin/launchd',1,1,1,NULL)"
# This outputs the rows in the TCC database
sudo sqlite3 /Library/Application\ Support/com.apple.TCC/TCC.db 'select * from access'
echo "Restart is required for these changes to take effect"
Update 8/02/2016 This is now fixed in Xcode 7.2.1 ("Command line tool ‘xcodebuild test’ will no longer time out waiting for Simulator.app to launch")
回答5:
I've seen this error before, one possibility is that since you probably downloaded the Xcode6 Beta from the internet (not the appstore as its not available yet), the machine you are trying to run it on will show a pop up asking you if you really want to open this app as its from the internet.
The same will happen when xcodebuild tries to launch the iPhone simulator app.
One thing you might want to try is to share screen with the machine and click "Open" in that pop up.
If that still doesn't work, I would try to:
- Reset the Content & Settings of the simulator
- Reboot the machine and make sure no simulator is running on start up (you can just choose not to re-open any app when restarting)
来源：https://stackoverflow.com/questions/25380365/timeout-when-running-xcodebuild-tests-under-xcode-6-via-ssh