1. 技术文章
  2. Running Code Analysis (FxCop > 10) on build agent without installing Visual Studio

Running Code Analysis (FxCop > 10) on build agent without installing Visual Studio

由 ぃ、小莉子 提交于 2019-12-17 07:01:43

问题


After FxCop 10 Microsoft stopped shipping a separate installer for FxCop. Officially one can currently only run code analysis (FxCop 12.0 / 14.0 / 15.0) after installing Visual Studio 2013 / 2015 / 2017. However, we are adamant about not installing Visual Studio on the build agents (the installation needs then to be kept in-sync with what we have got on the developer computers etc.).

So how would i go about getting FxCop 12.0 / 14.0 / 15.0 to work on a build agent, preferrably without installing anything else? I would accept adding a few binaries and msbuild files to source control, though. Otherwise: Is there a way to only install the FxCop stuff using Visual Studio 2013 / 2015 / 2017 installer?

Note: we are using Teamcity as build server.

Answers

As there are multiple valid answers for specific environments and FxCop versions, I've taken the liberty of linking them here for easier access:

  • FxCop 15.0 (Visual Studio 2017)
  • FxCop 14.0 (Visual Studio 2015)
  • FxCop 12.0 (Visual Studio 2013)
  • SonarQube

回答1:


For FxCop 14.0 / VS2015 see this answer

Run FxCop 12.0 without installing Visual Studio 2013

Okay, i've invested 6 hours and now it's working. I've added all necessary executables, dlls and msbuild targets to source control.

These are the files that i had to add to source control: (Please consider that this might violate some license agreements)

(source control)\dev\tools\FxCop
│
├[amd64]
│   │
│   └msdia120.dll
├[Engines]
│   │
│   ├IntrospectionAnalysisEngine.dll
│   └PhoenixAnalysisEngine.dll
├[Msbuild]
│   │
│   ├fxcoptask.dll
│   ├Microsoft.CodeAnalysis.Targets
│   ├Microsoft.VisualStudio.CodeAnalysis.dll
│   └Microsoft.VisualStudio.CodeAnalysis.Sdk.dll
├[Repository]
│   │
│   ├[Compatibility]
│   │   │
│   │   ├Desktop2.0.xml
│   │   ├Desktop2.0SP1.xml
│   │   ├Desktop2.0SP2.xml
│   │   ├Desktop3.0.xml
│   │   ├Desktop3.0SP1.xml
│   │   ├Desktop3.0SP2.xml
│   │   ├Desktop3.5.xml
│   │   └Desktop3.5SP1.xml
│   └system32.bin
├[Rules]
│   │
│   ├DataflowRules.dll
│   ├DesignRules.dll
│   ├GlobalizationRules.dll
│   ├InteroperabilityRules.dll
│   ├MaintainabilityRules.dll
│   ├MobilityRules.dll
│   ├NamingRules.dll
│   ├PerformanceRules.dll
│   ├PortabilityRules.dll
│   ├ReliabilityRules.dll
│   ├SecurityRules.dll
│   ├SecurityTransparencyRules.dll
│   └UsageRules.dll
├[Xml]
│   │
│   ├CodeAnalysisReport.xsl
│   ├FxCopReport.xsl
│   └VSConsoleOutput.xsl
├Architecture-msil.dll
├CodeAnalysis.dll
├CustomDictionary.xml
├FxCopCmd.exe
├FxCopCmd.exe.config
├FxCopCommon.dll
├FxCopSdk.dll
├Microsoft.Cci.dll
├Microsoft.VisualStudio.CodeAnalysis.Common.dll
├Microsoft.VisualStudio.CodeAnalysis.DataflowModels.dll
├Microsoft.VisualStudio.CodeAnalysis.dll
├Microsoft.VisualStudio.CodeAnalysis.Interop.dll
├Microsoft.VisualStudio.CodeAnalysis.Phoenix.dll
├Microsoft.VisualStudio.CodeAnalysis.Phoenix.xml
├msdia120.dll
├mssp7en.dll
├mssp7en.lex
├phx.dll
└Runtime-vccrt-win-msil.dll

Copy them as follows:

  • entire FxCop installation folder contents from

    %programfiles(x86)%\Microsoft Visual Studio 12.0\Team Tools\Static Analysis Tools\FxCop

  • from Visual Studio 2013 C++ redist, or any other place: (also see legal information) copy msdia120 x86 and x64 to:

    msdia120.dll (874 KiB)

    amd64\msdia120.dll (1.07 MiB)

  • from the Global Assembly Cache (C:\Windows\Microsoft.NET\assembly\GAC_MSIL\_NameOfTheAssembly_\) of a computer where VS2013 is installed, copy the following DLLs to: (Make sure the DLLs are version 12.0 !)

    Msbuild\Microsoft.VisualStudio.CodeAnalysis.dll

    Msbuild\Microsoft.VisualStudio.CodeAnalysis.Sdk.dll

  • All files from %programfiles(x86)%\MSBuild\Microsoft\VisualStudio\v12.0\CodeAnalysis to

    Msbuild\fxcoptask.dll

    Msbuild\Microsoft.CodeAnalysis.Targets

(Furthermore you need the appropriate Windows (7.1 / 8.1) SDK for building the .net 4.0 / 4.5 application installed on the build agent)

Additionally we had to adjust the project msbuild file as follows:

<!--Must import code analysis target before importing csharp targets, so that the correct code analysis targets gets imported. -->
<Import Project="$(ProjectBuildScriptDir)Custom.CodeAnalysis.targets"/>
<Import Project="$(MSBuildToolsPath)\Microsoft.CSharp.targets"/>

And this is what our Custom.CodeAnalysis.targets contains: 

  <PropertyGroup>
    <!-- Code analysis settings. -->
    <CodeAnalysisCulture>en-US</CodeAnalysisCulture>

    <!-- change this so it points to your ruleset or remove it entirely -->
    <CodeAnalysisRuleSet>$(SourcesDir)Custom.ruleset</CodeAnalysisRuleSet>

    <!-- this must refer to the source control directory where you copied FxCopCommand.exe (and the rest of the FxCop files and directories...) to -->
    <CodeAnalysisPath>$(ToolsDir)FxCop\</CodeAnalysisPath>

    <!-- this must refer to the source control directory where you copied fxcoptask.dll, Microsoft.CodeAnalysis.Targets, Microsoft.VisualStudio.CodeaAnalysis.dll and Microsoft.VisualStudio.CodeaAnalysis.Sdk.dll to -->
    <CodeAnalysisTargets>$(CodeAnalysisPath)Msbuild\Microsoft.CodeAnalysis.Targets</CodeAnalysisTargets>
  </PropertyGroup>
  <!-- configure this according to your wishes -->

  <PropertyGroup Condition="'$(Configuration)' == 'Release'">
    <CodeAnalysisTreatWarningsAsErrors>false</CodeAnalysisTreatWarningsAsErrors>
    <RunCodeAnalysis>true</RunCodeAnalysis>
  </PropertyGroup>

  <!-- Report code analysis results to TeamCity -->
  <Target Name="ReportCodeAnalysisResults" AfterTargets="RunCodeAnalysis" Condition="'$(RunCodeAnalysis)' == 'true' And '$(IsRunningOnTeamCity)' == 'true'">
    <Message Text="##teamcity[importData type='FxCop' path='$(CodeAnalysisLogFile)']" Importance="High" />
  </Target>

</Project>



回答2:


!! For FxCop 12.0 / VS2013 see this answer !!

Run FxCop 14.0 without installing Visual Studio 2015

Prerequisites:

  • MSBuild 14.0 --> Install Microsoft Build Tools 2015
  • Visual C++ Redistributable for Visual Studio 2015 x86 (the x86 version is always required, depending on the build x64 redist may be required as well. If it is missing the error message can be cryptic, for example System.IO.FileNotFoundException: Could not load file or assembly 'Microsoft.VisualStudio.CodeAnalysis.Interop.dll' or one of its dependencies. The specified module could not be found.). Instead of installing the entire redist you could also copy the necessary DLLs separately, but at this point i don't know which are needed. It's quite tricky and time consuming to find out which ones are exactly missing.

Depending on what you want to build:

  • appropriate Windows SDK, for example Windows 10 SDK
  • appropriate .net SDK / targets (.NET Framework 4.6 SDK is included in Windows 10 SDK)

Files to Add to Source Control

These are the files that i had to add to source control: (Please consider that this might violate some license agreements)

(source control)\tools\FxCop14
│
├[Engines]
│   │
│   ├IntrospectionAnalysisEngine.dll
│   └PhoenixAnalysisEngine.dll
├[Msbuild]
│   │
│   ├fxcoptask.dll
│   ├Microsoft.CodeAnalysis.Targets
│   ├Microsoft.VisualStudio.CodeAnalysis.dll
│   └Microsoft.VisualStudio.CodeAnalysis.Sdk.dll
├[Repository]
│   │
│   ├[Compatibility]
│   │   │
│   │   ├Desktop2.0.xml
│   │   ├Desktop2.0SP1.xml
│   │   ├Desktop2.0SP2.xml
│   │   ├Desktop3.0.xml
│   │   ├Desktop3.0SP1.xml
│   │   ├Desktop3.0SP2.xml
│   │   ├Desktop3.5.xml
│   │   └Desktop3.5SP1.xml
│   └system32.bin
├[Rules]
│   │
│   ├DataflowRules.dll
│   ├DesignRules.dll
│   ├GlobalizationRules.dll
│   ├InteroperabilityRules.dll
│   ├MaintainabilityRules.dll
│   ├MobilityRules.dll
│   ├NamingRules.dll
│   ├PerformanceRules.dll
│   ├PortabilityRules.dll
│   ├ReliabilityRules.dll
│   ├SecurityRules.dll
│   ├SecurityTransparencyRules.dll
│   └UsageRules.dll
├[x64]
│   │
│   └msdia140.dll (1349 KB)
├[Xml]
│   │
│   ├CodeAnalysisReport.xsl
│   ├FxCopReport.xsl
│   └VSConsoleOutput.xsl
├Architecture-msil.dll
├CodeAnalysis.dll
├CustomDictionary.xml
├FxCopCmd.exe
├FxCopCmd.exe.config
├FxCopCommon.dll
├FxCopSdk.dll
├Microsoft.Cci.dll
├Microsoft.VisualStudio.CodeAnalysis.Common.dll
├Microsoft.VisualStudio.CodeAnalysis.DataflowModels.dll
├Microsoft.VisualStudio.CodeAnalysis.dll
├Microsoft.VisualStudio.CodeAnalysis.Interop.dll
├Microsoft.VisualStudio.CodeAnalysis.Phoenix.dll
├Microsoft.VisualStudio.CodeAnalysis.Phoenix.xml
├msdia140.dll (1057 KB)
├mssp7en.dll
├mssp7en.lex
├phx.dll
└Runtime-vccrt-win-msil.dll

Copy them as follows:

  • entire FxCop installation folder contents from

    %programfiles(x86)%\Microsoft Visual Studio 14.0\Team Tools\Static Analysis Tools\FxCop

  • from Visual Studio 2015 C++ redist, or any other place: (also see legal information) copy msdia140 x86 and x64 to:

    msdia140.dll (1057 KiB)

    amd64\msdia140.dll (1349 KiB)

  • from the Global Assembly Cache (C:\Windows\Microsoft.NET\assembly\GAC_MSIL\_NameOfTheAssembly_\) of a computer where VS2015 is installed, copy the following DLLs to: (Make sure the DLLs are version 14.0 !)

    Msbuild\Microsoft.VisualStudio.CodeAnalysis.dll

    Msbuild\Microsoft.VisualStudio.CodeAnalysis.Sdk.dll

  • All files from %programfiles(x86)%\MSBuild\Microsoft\VisualStudio\v14.0\CodeAnalysis to

    Msbuild\fxcoptask.dll

    Msbuild\Microsoft.CodeAnalysis.Targets

Additionally i adjusted the project msbuild file (*.csproj) as follows (Hint: i'm slightly deviating from the way i previously did it with VS2013. It's not because FxCop 14 works differently but rather because this way i can include fxcop by a nuget package and use standard nuget functionality for .targets file import to .csproj):

<!-- Microsoft.CSharp.targets import is contained in csproj by default. This just goes to show the sequence -->
<Import Project="$(MSBuildToolsPath)\Microsoft.CSharp.targets"/>

<!-- now this must be added -->
<Import Project="$(ProjectBuildScriptDir)Custom.CodeAnalysis.targets"/>

And this is what our Custom.CodeAnalysis.targets contains:

<?xml version="1.0" encoding="utf-8"?>
<Project xmlns="http://schemas.microsoft.com/developer/msbuild/2003">

    <!-- Code analysis settings. -->
    <PropertyGroup>
        <!-- this must reference the path where you copied the FxCop stuff to -->
        <FxCopDir>..\FxCop14\</FxCopDir> 
        <CodeAnalysisCulture>en-US</CodeAnalysisCulture>
        <CodeAnalysisRuleSet>$(SolutionDir)FxCop.ruleset</CodeAnalysisRuleSet>
        <!-- you can and should use another condition here. Otherwise code analysis will be run on every build in VS as well. -->
        <!-- in my build setup i do something like Condition=IsRunningOnTeamCity => true -->
        <RunCodeAnalysis>true</RunCodeAnalysis> 
        <CodeAnalysisTreatWarningsAsErrors Condition="'$(IsRunningOnTeamCity)' != 'true'">true</CodeAnalysisTreatWarningsAsErrors>
    </PropertyGroup>

    <Import Project="$(FxCopDir)Msbuild\Microsoft.CodeAnalysis.Targets" />

    <Target Name="CodeAnalysisLogHeader" BeforeTargets="RunCodeAnalysis" Condition="$(RunCodeAnalysis) == 'true'">
        <Message Text="Text, Executing Code Analysis (FxCop) on $(MsBuildProjectName)" Importance="High" />
    </Target>

    <!-- Report code analysis results to TeamCity -->
    <Target Name="ReportCodeAnalysisResults" AfterTargets="RunCodeAnalysis" Condition="$(RunCodeAnalysis) == 'true' AND '$(IsRunningOnTeamCity)' == 'true'">
        <Message Text="##teamcity[importData type='FxCop' path='$(MSBuildProjectDirectory)\$(CodeAnalysisLogFile)']" Importance="High" />
    </Target>

</Project>



回答3:


Using FxCop for SonarQube analysis without installing Visual Studio

If you have any FxCop rules enabled in your SonarQube quality profile, SonarQube requires FxCop 14.0.

These steps are largely based on the outstanding answer by @BatteryBackupUnit:

  1. Install Microsoft Build Tools 2015 on the build machine.

  2. Install Microsoft Visual C++ 2015 Redistributable Update 3, both x86 and x64, on the build machine.

  3. Import the following registry file (update drive letter if not C:) on the build machine:


Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\WDExpress\14.0\Setup\EDev]
"StanDir"="C:\\Program Files (x86)\\Microsoft Visual Studio 14.0\\Team Tools\\Static Analysis Tools\\"
"FxCopDir"="C:\\Program Files (x86)\\Microsoft Visual Studio 14.0\\Team Tools\\Static Analysis Tools\\FxCop\\"

  1. Copy all of %programfiles(x86)%\Microsoft Visual Studio 12.0\Team Tools\Static Analysis Tools (not just the FxCop subdirectory) to the same place on the build machine.

  2. Copy %programfiles(x86)%\MSBuild\Microsoft\VisualStudio\v14.0\CodeAnalysis to the same place on the build machine.

  3. From the Global Assembly Cache (C:\Windows\Microsoft.NET\assembly\GAC_MSIL_NameOfTheAssembly_) of a computer where VS2015 is installed, copy Microsoft.VisualStudio.CodeAnalysis.dll and Microsoft.VisualStudio.CodeAnalysis.Sdk.dll (Make sure the DLLs are version 14.0!). Either copy to C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v14.0\CodeAnalysis on the build machine or install into the build machine's GAC.

If you see Phx.FatalError after all this - there's one last ritual... Copy vs_profiler_x64_enu.exe from Program Files (x86)\Microsoft Visual Studio 14.0\Team Tools\Performance Tools\Setups and install it on the build machine.

Deviations from @BatteryBackupUnit's instructions:

  1. The entire Static Analysis Tools directory is needed, not just the FxCop subdirectory.
  2. Instead of nesting a Msbuild subfolder under FxCop, you need to place it in the original location.
  3. Copying msdia120.dll and amd64\msdia140.dll files into the FxCop directory seems unnecessary so long as the Visual C++ 2015 Redistributable is installed.
  4. No FxCop-related modifications to the project file (*.csproj).
  5. No Custom.CodeAnalysis.targets file.



回答4:


Run FxCop 15.0 without installing Visual Studio 2017

Prerequisites:

  • MSBuild 15.0 --> Install Microsoft Build Tools 2017, you might also want to see here
  • Visual C++ Redistributable for Visual Studio 2017 x86 or here OR Visual Studio 2017 with C++. ---- Note: the x86 version is always required, depending on the build x64 redist may be required as well. If it is missing the error message can be cryptic, for example System.IO.FileNotFoundException: Could not load file or assembly 'Microsoft.VisualStudio.CodeAnalysis.Interop.dll' or one of its dependencies. The specified module could not be found.). Instead of installing the entire redist you could also copy the necessary DLLs separately, but at this point i don't know which are needed. It's quite tricky and time consuming to find out which ones are exactly missing.

Depending on what you want to build:

  • appropriate Windows SDK, for example Windows 10 SDK
  • appropriate .net SDK / targets (.NET Framework 4.6 SDK is included in Windows 10 SDK)

Files to Add to Source Control

These are the files that i had to add to source control: (Please consider that this might violate some license agreements)

(source control)\tools\FxCop15
│
├[Engines]
│   │
│   ├IntrospectionAnalysisEngine.dll
│   └PhoenixAnalysisEngine.dll
├[Msbuild]
│   │
│   ├fxcoptask.dll
│   ├Microsoft.CodeAnalysis.Targets
│   ├Microsoft.VisualStudio.CodeAnalysis.dll
│   └Microsoft.VisualStudio.CodeAnalysis.Sdk.dll
├[Repository]
│   │
│   ├[Compatibility]
│   │   │
│   │   ├Desktop2.0.xml
│   │   ├Desktop2.0SP1.xml
│   │   ├Desktop2.0SP2.xml
│   │   ├Desktop3.0.xml
│   │   ├Desktop3.0SP1.xml
│   │   ├Desktop3.0SP2.xml
│   │   ├Desktop3.5.xml
│   │   └Desktop3.5SP1.xml
│   └system32.bin
├[Rules]
│   │
│   ├DataflowRules.dll
│   ├DesignRules.dll
│   ├GlobalizationRules.dll
│   ├InteroperabilityRules.dll
│   ├MaintainabilityRules.dll
│   ├MobilityRules.dll
│   ├NamingRules.dll
│   ├PerformanceRules.dll
│   ├PortabilityRules.dll
│   ├ReliabilityRules.dll
│   ├SecurityRules.dll
│   ├SecurityTransparencyRules.dll
│   └UsageRules.dll
├[x64]
│   │
│   └msdia140.dll (1349 KB)
├[Xml]
│   │
│   ├CodeAnalysisReport.xsl
│   ├FxCopReport.xsl
│   └VSConsoleOutput.xsl
├Architecture-msil.dll
├CodeAnalysis.dll
├CustomDictionary.xml
├FxCopCmd.exe
├FxCopCmd.exe.config
├FxCopCommon.dll
├FxCopSdk.dll
├Microsoft.Cci.dll
├Microsoft.VisualStudio.CodeAnalysis.Common.dll
├Microsoft.VisualStudio.CodeAnalysis.DataflowModels.dll
├Microsoft.VisualStudio.CodeAnalysis.dll
├Microsoft.VisualStudio.CodeAnalysis.Interop.dll
├Microsoft.VisualStudio.CodeAnalysis.Phoenix.dll
├Microsoft.VisualStudio.CodeAnalysis.Phoenix.xml
├msdia140.dll (1057 KB)
├mssp7en.dll
├mssp7en.lex
├phx.dll
└Runtime-vccrt-win-msil.dll

Copy them as follows:

  • entire FxCop installation folder contents from

    %programfiles(x86)%\Microsoft Visual Studio\2017\ **INSERT EDITION HERE** \Team Tools\Static Analysis Tools\FxCop

  • from Visual Studio 2017 C++ redist (or your Visual Studio 2017 Installation, if you've got VC++ workload installed: %ProgramFiles(x86)%\Microsoft Visual Studio\2017\\VC\Redist\MSVC\14.12.25810) or any other place: (also see legal information) copy msdia140 x86 and x64 (mine have the version 14.12.25810.0) to:

    msdia140.dll (1.12 MiB)

    amd64\msdia140.dll (1.42 MiB)

  • All files from %programfiles(x86)%\\Microsoft Visual Studio\2017\ **INSERT EDITION HERE** \MSBuild\Microsoft\VisualStudio\v15.0\CodeAnalysis to

    Msbuild\fxcoptask.dll

    Msbuild\Microsoft.CodeAnalysis.Targets

    Msbuild\Microsoft.VisualStudio.CodeAnalysis.dll

    Msbuild\Microsoft.VisualStudio.CodeAnalysis.Sdk.dll

Additionally i adjusted the project msbuild file (*.csproj) as follows:

<!-- Microsoft.CSharp.targets import is contained in csproj by default. This just goes to show the sequence -->
<Import Project="$(MSBuildToolsPath)\Microsoft.CSharp.targets"/>

<!-- now this must be added -->
<Import Project="$(ProjectBuildScriptDir)Custom.CodeAnalysis.targets"/>

And this is what our Custom.CodeAnalysis.targets contains:

<?xml version="1.0" encoding="utf-8"?>
<Project xmlns="http://schemas.microsoft.com/developer/msbuild/2003">

    <!-- Code analysis settings. -->
    <PropertyGroup>
        <!-- this must reference the path where you copied the FxCop stuff to -->
        <FxCopDir>..\FxCop15\</FxCopDir> 
        <CodeAnalysisCulture>en-US</CodeAnalysisCulture>
        <CodeAnalysisRuleSet>$(SolutionDir)FxCop.ruleset</CodeAnalysisRuleSet>
        <!-- you can and should use another condition here. Otherwise code analysis will be run on every build in VS as well. -->
        <!-- in my build setup i do something like Condition=IsRunningOnTeamCity => true -->
        <RunCodeAnalysis>true</RunCodeAnalysis> 
        <CodeAnalysisTreatWarningsAsErrors Condition="'$(IsRunningOnTeamCity)' != 'true'">true</CodeAnalysisTreatWarningsAsErrors>
    </PropertyGroup>

    <Import Project="$(FxCopDir)Msbuild\Microsoft.CodeAnalysis.Targets" />

    <Target Name="CodeAnalysisLogHeader" BeforeTargets="RunCodeAnalysis" Condition="$(RunCodeAnalysis) == 'true' OR $(RunCodeAnalysisOnce) == 'true'">
        <Message Text="Text, Executing Code Analysis (FxCop) on $(MsBuildProjectName)" Importance="High" />
    </Target>

</Project>

Notes for Visual Studio Paths:

The path to the visual studio installation is edition dependent. It includes Professional and Enterprise. AFAIR the community edition has a different path, but also does not support FxCop. Corrections welcome :-)




回答5:


There's a very simple way for TFS:

On the build machine, add an environment variable: FXCOPDIR, point it to: C:\Program Files (x86)\Microsoft Visual Studio 12.0\Team Tools\Static Analysis Tools\FxCop (just copy this folder from your dev machine).

In this directory there's a file called: FxCopCmd.exe and TFS Build will pick it up automatically, even if vs is not installed. You might need to re-boot the server once or twice, but the build will eventually work. You'll also need to ensure that two dlls are installed to the gac: Microsoft.VisualStudio.CodeAnalysis.dll and Microsoft.VisualStudio.CodeAnalysis.Sdk.dll The first one can be found in the path mentioned above, but the latter, the only way i got a hold of it is that i grabbed it from the gac on my dev machine. (you can disable the special gac folder view, by modifying the registry, just google it).



来源：https://stackoverflow.com/questions/21729066/running-code-analysis-fxcop-10-on-build-agent-without-installing-visual-stud

标签
.net
msbuild
continuous-integration
fxcop
build-server
易学教程内所有资源均来自网络或用户发布的内容，如有违反法律规定的内容欢迎反馈！
该文章没有解决你所遇到的问题?点击提问,说说你的问题,让更多的人一起探讨吧!