问题
I am trying to get a UIImage from what is displayed in my EAGLView. Any suggestions on how to do this?
回答1:
EDIT: as demianturner notes below, you no longer need to render the layer, you can (and should) now use the higher-level [UIView drawViewHierarchyInRect:]. Other than that; this should work the same.
An EAGLView is just a kind of view, and its underlying CAEAGLLayer is just a kind of layer. That means, that the standard approach for converting a view/layer into a UIImage will work. (The fact that the linked question is UIWebview doesn't matter; that's just yet another kind of view.)
回答2:
Here is a cleaned up version of Quakeboy's code. I tested it on iPad, and works just fine. The improvements include:
- works with any size EAGLView
- works with retina display (point scale 2)
- replaced nested loop with memcpy
- cleaned up memory leaks
- saves the UIImage in the photoalbum as a bonus.
Use this as a method in your EAGLView:
-(void)snapUIImage
{
int s = 1;
UIScreen* screen = [ UIScreen mainScreen ];
if ( [ screen respondsToSelector:@selector(scale) ] )
s = (int) [ screen scale ];
const int w = self.frame.size.width;
const int h = self.frame.size.height;
const NSInteger myDataLength = w * h * 4 * s * s;
// allocate array and read pixels into it.
GLubyte *buffer = (GLubyte *) malloc(myDataLength);
glReadPixels(0, 0, w*s, h*s, GL_RGBA, GL_UNSIGNED_BYTE, buffer);
// gl renders "upside down" so swap top to bottom into new array.
// there's gotta be a better way, but this works.
GLubyte *buffer2 = (GLubyte *) malloc(myDataLength);
for(int y = 0; y < h*s; y++)
{
memcpy( buffer2 + (h*s - 1 - y) * w * 4 * s, buffer + (y * 4 * w * s), w * 4 * s );
}
free(buffer); // work with the flipped buffer, so get rid of the original one.
// make data provider with data.
CGDataProviderRef provider = CGDataProviderCreateWithData(NULL, buffer2, myDataLength, NULL);
// prep the ingredients
int bitsPerComponent = 8;
int bitsPerPixel = 32;
int bytesPerRow = 4 * w * s;
CGColorSpaceRef colorSpaceRef = CGColorSpaceCreateDeviceRGB();
CGBitmapInfo bitmapInfo = kCGBitmapByteOrderDefault;
CGColorRenderingIntent renderingIntent = kCGRenderingIntentDefault;
// make the cgimage
CGImageRef imageRef = CGImageCreate(w*s, h*s, bitsPerComponent, bitsPerPixel, bytesPerRow, colorSpaceRef, bitmapInfo, provider, NULL, NO, renderingIntent);
// then make the uiimage from that
UIImage *myImage = [ UIImage imageWithCGImage:imageRef scale:s orientation:UIImageOrientationUp ];
UIImageWriteToSavedPhotosAlbum( myImage, nil, nil, nil );
CGImageRelease( imageRef );
CGDataProviderRelease(provider);
CGColorSpaceRelease(colorSpaceRef);
free(buffer2);
}
回答3:
I was unable to get the other answers here to work correctly for me.
After a few days I finally got a working solution to this. There is code provided by Apple which produces a UIImage from a EAGLView. Then you simply need to flip the image vertically since UIkit is upside down.
Apple Provided Method - Modified to be inside the view you want to make into an image.
-(UIImage *) drawableToCGImage
{
GLint backingWidth2, backingHeight2;
//Bind the color renderbuffer used to render the OpenGL ES view
// If your application only creates a single color renderbuffer which is already bound at this point,
// this call is redundant, but it is needed if you're dealing with multiple renderbuffers.
// Note, replace "_colorRenderbuffer" with the actual name of the renderbuffer object defined in your class.
glBindRenderbufferOES(GL_RENDERBUFFER_OES, viewRenderbuffer);
// Get the size of the backing CAEAGLLayer
glGetRenderbufferParameterivOES(GL_RENDERBUFFER_OES, GL_RENDERBUFFER_WIDTH_OES, &backingWidth2);
glGetRenderbufferParameterivOES(GL_RENDERBUFFER_OES, GL_RENDERBUFFER_HEIGHT_OES, &backingHeight2);
NSInteger x = 0, y = 0, width2 = backingWidth2, height2 = backingHeight2;
NSInteger dataLength = width2 * height2 * 4;
GLubyte *data = (GLubyte*)malloc(dataLength * sizeof(GLubyte));
// Read pixel data from the framebuffer
glPixelStorei(GL_PACK_ALIGNMENT, 4);
glReadPixels(x, y, width2, height2, GL_RGBA, GL_UNSIGNED_BYTE, data);
// Create a CGImage with the pixel data
// If your OpenGL ES content is opaque, use kCGImageAlphaNoneSkipLast to ignore the alpha channel
// otherwise, use kCGImageAlphaPremultipliedLast
CGDataProviderRef ref = CGDataProviderCreateWithData(NULL, data, dataLength, NULL);
CGColorSpaceRef colorspace = CGColorSpaceCreateDeviceRGB();
CGImageRef iref = CGImageCreate(width2, height2, 8, 32, width2 * 4, colorspace, kCGBitmapByteOrder32Big | kCGImageAlphaPremultipliedLast,
ref, NULL, true, kCGRenderingIntentDefault);
// OpenGL ES measures data in PIXELS
// Create a graphics context with the target size measured in POINTS
NSInteger widthInPoints, heightInPoints;
if (NULL != UIGraphicsBeginImageContextWithOptions) {
// On iOS 4 and later, use UIGraphicsBeginImageContextWithOptions to take the scale into consideration
// Set the scale parameter to your OpenGL ES view's contentScaleFactor
// so that you get a high-resolution snapshot when its value is greater than 1.0
CGFloat scale = self.contentScaleFactor;
widthInPoints = width2 / scale;
heightInPoints = height2 / scale;
UIGraphicsBeginImageContextWithOptions(CGSizeMake(widthInPoints, heightInPoints), NO, scale);
}
else {
// On iOS prior to 4, fall back to use UIGraphicsBeginImageContext
widthInPoints = width2;
heightInPoints = height2;
UIGraphicsBeginImageContext(CGSizeMake(widthInPoints, heightInPoints));
}
CGContextRef cgcontext = UIGraphicsGetCurrentContext();
// UIKit coordinate system is upside down to GL/Quartz coordinate system
// Flip the CGImage by rendering it to the flipped bitmap context
// The size of the destination area is measured in POINTS
CGContextSetBlendMode(cgcontext, kCGBlendModeCopy);
CGContextDrawImage(cgcontext, CGRectMake(0.0, 0.0, widthInPoints, heightInPoints), iref);
// Retrieve the UIImage from the current context
UIImage *image = UIGraphicsGetImageFromCurrentImageContext();
UIGraphicsEndImageContext();
// Clean up
free(data);
CFRelease(ref);
CFRelease(colorspace);
CGImageRelease(iref);
return image;
}
And heres a method to flip the image
- (UIImage *) flipImageVertically:(UIImage *)originalImage {
UIImageView *tempImageView = [[UIImageView alloc] initWithImage:originalImage];
UIGraphicsBeginImageContext(tempImageView.frame.size);
CGContextRef context = UIGraphicsGetCurrentContext();
CGAffineTransform flipVertical = CGAffineTransformMake(
1, 0, 0, -1, 0, tempImageView.frame.size.height
);
CGContextConcatCTM(context, flipVertical);
[tempImageView.layer renderInContext:context];
UIImage *flippedImage = UIGraphicsGetImageFromCurrentImageContext();
UIGraphicsEndImageContext();
//[tempImageView release];
return flippedImage;
}
And here's a link to the Apple dev page where I found the first method for reference. http://developer.apple.com/library/ios/#qa/qa1704/_index.html
回答4:
-(UIImage *) saveImageFromGLView
{
NSInteger myDataLength = 320 * 480 * 4;
// allocate array and read pixels into it.
GLubyte *buffer = (GLubyte *) malloc(myDataLength);
glReadPixels(0, 0, 320, 480, GL_RGBA, GL_UNSIGNED_BYTE, buffer);
// gl renders "upside down" so swap top to bottom into new array.
// there's gotta be a better way, but this works.
GLubyte *buffer2 = (GLubyte *) malloc(myDataLength);
for(int y = 0; y <480; y++)
{
for(int x = 0; x <320 * 4; x++)
{
buffer2[(479 - y) * 320 * 4 + x] = buffer[y * 4 * 320 + x];
}
}
// make data provider with data.
CGDataProviderRef provider = CGDataProviderCreateWithData(NULL, buffer2, myDataLength, NULL);
// prep the ingredients
int bitsPerComponent = 8;
int bitsPerPixel = 32;
int bytesPerRow = 4 * 320;
CGColorSpaceRef colorSpaceRef = CGColorSpaceCreateDeviceRGB();
CGBitmapInfo bitmapInfo = kCGBitmapByteOrderDefault;
CGColorRenderingIntent renderingIntent = kCGRenderingIntentDefault;
// make the cgimage
CGImageRef imageRef = CGImageCreate(320, 480, bitsPerComponent, bitsPerPixel, bytesPerRow, colorSpaceRef, bitmapInfo, provider, NULL, NO, renderingIntent);
// then make the uiimage from that
UIImage *myImage = [UIImage imageWithCGImage:imageRef];
CGImageRelease( imageRef );
CGDataProviderRelease(provider);
CGColorSpaceRelease(colorSpaceRef);
free(buffer2);
return myImage;
}
回答5:
CGDataProviderCreateWithData comes with a release callback to release the data, where you should do the release:
void releaseBufferData(void *info, const void *data, size_t size)
{
free((void*)data);
}
Then do this like other examples, but NOT to free data here:
GLubyte *bufferData = (GLubyte *) malloc(bufferDataSize);
CGDataProviderRef provider = CGDataProviderCreateWithData(NULL, bufferData, bufferDataSize, releaseBufferData);
....
CGDataProviderRelease(provider);
Or simply use CGDataProviderCreateWithCFData without release callback stuff instead:
GLubyte *bufferData = (GLubyte *) malloc(bufferDataSize);
NSData *data = [NSData dataWithBytes:bufferData length:bufferDataSize];
CGDataProviderRef provider = CGDataProviderCreateWithCFData((CFDataRef)data);
....
CGDataProviderRelease(provider);
free(bufferData); // Remember to free it
For more information, please check this discuss:
What's the right memory management pattern for buffer->CGImageRef->UIImage?
回答6:
With this above code of Brad Larson, you have to edit your EAGLView.m
- (id)initWithCoder:(NSCoder*)coder{
self = [super initWithCoder:coder];
if (self) {
CAEAGLLayer *eaglLayer = (CAEAGLLayer *)self.layer;
eaglLayer.opaque = TRUE;
eaglLayer.drawableProperties =
[NSDictionary dictionaryWithObjectsAndKeys:
[NSNumber numberWithBool:YES], kEAGLDrawablePropertyRetainedBacking,
kEAGLColorFormatRGBA8, kEAGLDrawablePropertyColorFormat, nil];
}
return self;
}
You have to change numberWithBool value YES
来源：https://stackoverflow.com/questions/1352864/how-to-get-uiimage-from-eaglview