问题
What are the advantages and disadvantages of using one instead of the other in C++?
回答1:
If you want to know the true answer, you should read What Every Computer Scientist Should Know About Floating-Point Arithmetic.
In short, although double allows for higher precision in its representation, for certain calculations it would produce larger errors. The "right" choice is: use as much precision as you need but not more and choose the right algorithm.
Many compilers do extended floating point math in "non-strict" mode anyway (i.e. use a wider floating point type available in hardware, e.g. 80-bits and 128-bits floating), this should be taken into account as well. In practice, you can hardly see any difference in speed -- they are natives to hardware anyway.
回答2:
Unless you have some specific reason to do otherwise, use double.
Perhaps surprisingly, it is double and not float that is the "normal" floating-point type in C (and C++). The standard math functions such as sin and log take doubles as arguments, and return doubles. A normal floating-point literal, as when you write 3.14 in your program, has the type double. Not float.
On typical modern computers, doubles can be just as fast as floats, or even faster, so performance is usually not a factor to consider, even for large calculations. (And those would have to be large calculations, or performance shouldn't even enter your mind. My new i7 desktop computer can do six billion multiplications of doubles in one second.)
回答3:
This question is impossible to answer since there is no context to the question. Here are some things that can affect the choice:
Compiler implementation of floats, doubles and long doubles. The C++ standard states:
There are three floating point types: float, double, and long double. The type double provides at least as much precision as float, and the type long double provides at least as much precision as double.
So, all three can be the same size in memory.
Presence of an FPU. Not all CPUs have FPUs and sometimes the floating point types are emulated and sometimes the floating point types are just not supported.
FPU Architecture. The IA32's FPU is 80bit internally - 32 bit and 64 bit floats are expanded to 80bit on load and reduced on store. There's also SIMD which can do four 32bit floats or two 64bit floats in parallel. Use of SIMD is not defined in the standard so it would require a compiler that does more complex analysis to determine if SIMD can be used, or requires the use of special functions (libraries or intrinsics). The upshot of the 80bit internal format is that you can get slightly different results depending on how often the data is saved to RAM (thus, losing precision). For this reason, compilers don't optimise floating point code particularly well.
Memory bandwidth. If a double requires more storage than a float, then it will take longer to read the data. That's the naive answer. On a modern IA32, it all depends on where the data is coming from. If it's in L1 cache, the load is negligible provided the data comes from a single cache line. If it spans more than one cache line there's a small overhead. If it's from L2, it takes a while longer, if it's in RAM then it's longer still and finally, if it's on disk it's a huge time. So the choice of float or double is less important than the way the data is used. If you want to do a small calculation on lots of sequential data, a small data type is preferable. Doing a lot of computation on a small data set would allow you to use bigger data types with any significant effect. If you're accessing the data very randomly, then the choice of data size is unimportant - data is loaded in pages / cache lines. So even if you only want a byte from RAM, you could get 32 bytes transferred (this is very dependant on the architecture of the system). On top of all of this, the CPU/FPU could be super-scalar (aka pipelined). So, even though a load may take several cycles, the CPU/FPU could be busy doing something else (a multiply for instance) that hides the load time to a degree.
The standard does not enforce any particular format for floating point values.
If you have a specification, then that will guide you to the optimal choice. Otherwise, it's down to experience as to what to use.
回答4:
Double is more precise but is coded on 8 bytes. float is only 4 bytes, so less room and less precision.
You should be very careful if you have double and float in your application. I had a bug due to that in the past. One part of the code was using float while the rest of the code was using double. Copying double to float and then float to double can cause precision error that can have big impact. In my case, it was a chemical factory... hopefully it didn't have dramatic consequences :)
I think that it is because of this kind of bug that the Ariane 6 rocket has exploded a few years ago!!!
Think carefully about the type to be used for a variable
回答5:
I personnaly go for double all the time until I see some bottlenecks. Then I consider moving to float or optimizing some other part
回答6:
This depends on how the compiler implements double. It's legal for double and float to be the same type (and it is on some systems).
That being said, if they are indeed different, the main issue is precision. A double has a much higher precision due to it's difference in size. If the numbers you are using will commonly exceed the value of a float, then use a double.
Several other people have mentioned performance isssues. That would be exactly last on my list of considerations. Correctness should be your #1 consideration.
回答7:
Use whichever precision is required to achieve the appropriate results. If you then find that your code isn't performing as well as you'd like (you used profiling correct?) take a look at:
- Intel 64 and IA-32 Architectures Optimization Reference Manual
- Software Optimization for the AMD64 Processor
回答8:
I think regardless of the differences (which as everyone points out, floats take up less space and are in general faster)... does anyone ever suffer performance issues using double? I say use double... and if later on you decide "wow, this is really slow"... find your performance bottleneck (which is probably not the fact you used double). THEN, if it's still too slow for you, see where you can sacrifice some precision and use float.
回答9:
The main difference between float and double is precision. Wikipedia has more info about Single precision (float) and Double precision.
回答10:
It depends highly on the CPU the most obvious trade-offs are between precision and memory. With GBs of RAM, memory is not much of an issue, so it's generally better to use doubles.
As for performance, it depends highly on the CPU. floats will usually get better performance than doubles on a 32 bit machine. On 64 bit, doubles are sometimes faster, since it is (usually) the native size. Still, what will matter much more than your choice of data types is whether or not you can take advantage of SIMD instructions on your processor.
回答11:
double has higher precision, whereas floats take up less memory and are faster. In general you should use float unless you have a case where it isn't accurate enough.
来源：https://stackoverflow.com/questions/1074474/should-i-use-double-or-float