问题
I need to know that before any attempt to do anything with such file.
回答1:
Not sure about locked directories (does Windows have that?)
But detecting if a file is being written to by another process is not difficult.
@echo off
2>nul (
>>test.txt echo off
) && (echo file is not locked) || (echo file is locked)
I use the following test script from another window to place a lock on the file.
(
>&2 pause
) >> test.txt
When I run the 2nd script from one window and then run the 1st script from a second window, I get my "locked" message. Once I press <Enter> in the 1st window, I get the "unlocked" message if I rerun the 1st script.
Explanation
Whenever the output of a command is redirected to a file, the file of course must be opened for write access. The Windows CMD session will attempt to open the file, even if the command does not produce any output.
The >> redirection operator opens the file in append mode.
So >>test.txt echo off will attempt to open the file, it writes nothing to the file (assuming echo is already off), and then it closes the file. The file is not modified in any way.
Most processes lock a file whenever they open a file for write access. (There are OS system calls that allow opening a file for writing in a shared mode, but that is not the default). So if another process already has "test.txt" locked for writing, then the redirection will fail with the following error message sent to stderr - "The process cannot access the file because it is being used by another process.". Also an error code will be generated upon redirection failure. If the command and the redirection succeed, then a success code is returned.
Simply adding 2>nul to the command will not prevent the error message because it redirects the error output for the command, not the redirection. That is why I enclose the command in parentheses and then redirect the error output to nul outside of the parens.
So the error message is effectively hidden, but the error code is still propagated outside of the parens. The standard Windows && and || operators are used to detect whether the command inside the parens was successful or failed. Presumably echo off will never fail, so the only possible reason for failure would be the redirection failed. Most likely it fails because of a locking issue, though technically there could be other reasons for failure.
It is a curious "feature" that Windows does not set the %ERRORLEVEL% dynamic variable to an error upon redirection failure unless the || operator is used. (See File redirection in Windows and %errorlevel%). So the || operator must read the returned error code at some low level, not via the %ERRORLEVEL% variable.
Using these techniques to detect redirection failure can be very useful in a batch context. It can be used to establish locks that allow serialization of multiple events in parallel processes. For example, it can enable multiple processes to safely write to the same log file at the "same" time. How do you have shared log files under Windows?
EDIT
Regarding locked folders. I'm not sure how Windows implements this, perhaps with a lock. But if a process has an active directory involving the folder, then the folder cannot be renamed. That can easily be detected using
2>nul ren folderName folderName && echo Folder is NOT locked || echo folder is LOCKED
EDIT
I have since learned that (call ) (with a space) is a very fast command without side effects that is guaranteed to succeed with ERRORLEVEL set to 0. And (call) (without a space) is a fast command without side effects that is guaranteed to fail with ERRORLEVEL 1.
So I now use the following to check if a file is locked:
2>nul (
>>test.txt (call )
) && (echo file is not locked) || (echo file is locked)
回答2:
In addition to great answer from dbenham, the following form finally help me understand used technique:
( type nul >> file.txt ) 2>nul || echo File is locked!
type nul command gives an empty output and does not affect the current echo setting like echo off command in orginal.
If you want to use if–then–else condition remember of correct order - success statement (&&) is going first and alternate statement (||) is going second:
command && (echo Command is successful) || (echo Command has failed)
回答3:
If you download and install the Windows Server 2003 Resource Kit Tools there is a utility called oh.exe that will list open file handles for a given file:
http://www.microsoft.com/en-us/download/details.aspx?id=17657
Once you install it, reboot your machine and you'll be able to use the utility. You can see all the options in the Help and Support center as well as by typing oh /? in the command prompt.
(Info from : http://windowsxp.mvps.org/processlock.htm )
回答4:
Note, the writing of a message stating the file status was less helpful than a batch command that set a return code. For example, return code 1 if file is locked.
@echo off
2>nul (
>>test.tmp echo off
) && (EXIT /B 0) || (EXIT /B 1)
回答5:
Incidentally, dbenham's solution also seems to be an effective way to find out if a process is running. It was the best solution I found for the following application:
start /b "job1.exe >> job1.out"
start /b /wait "job2.exe >> job2.out"
::wait for job1 to finish using dbenham's code to check if job1.out is in use
comparejobs.exe
回答6:
Just i want to share with you an example of my script based on @dbenham's trick
Description of this script : Check_Locked_Files.bat : This script can scan and check for locked files on a set of folders that can be modified into the script; for example, i have chosen those set of folders to be scanned :
Set Folders=^
^ "%ProgramData%\Microsoft\Windows\Start Menu\Programs\Startup"^
^ "%UserProfile%\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup"^
^ "%ProgramFiles%\Internet Explorer"^
^ "%ProgramFiles%\Skype"^
^ "%ProgramFiles%\TeamViewer"^
^ "%WinDir%\system32\drivers"^
^ "%Temp%"
The output result is in HTML format for more readability.
If the file is locked we show it in red color otherwise we show it in green color.
And the whole script is : Check_Locked_Files.bat
@echo off
Rem This source is inspired from here
Rem hxxps://stackoverflow.com/questions/
Rem 10518151/how-to-check-in-command-line-if-a-given-file-or-directory-is-locked-used-by-any?answertab=active#tab-top
Rem Thanks for dbenham for this nice trick ;)
Mode con cols=90 lines=5 & color 9E
Title Scan and Check for Locked Files by Hackoo 2017
set "LogFile=%~dp0%~n0.html"
(
echo ^<html^>
echo ^<title^> Scan and Check for locked files by Hackoo 2017^</title^>
echo ^<body bgcolor^=#ffdfb7^>
echo ^<center^>^<b^>Log Started on %Date% @ %Time% by the user : "%username%" on the computer : "%ComputerName%"^</b^>^</center^>
)> "%LogFile%"
echo(
echo --------------------------------------------------------------------------
echo Please Wait a while ....... Scanning for locked files is in progress
echo --------------------------------------------------------------------------
Rem We Play radio just for fun and in order to let the user be patient until the scan ended
Call :Play_DJ_Buzz_Radio
Timeout /T 3 /nobreak>nul
cls
Set Folders=^
^ "%ProgramData%\Microsoft\Windows\Start Menu\Programs\Startup"^
^ "%UserProfile%\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup"^
^ "%ProgramFiles%\Internet Explorer"^
^ "%ProgramFiles%\Skype"^
^ "%ProgramFiles%\TeamViewer"^
^ "%WinDir%\system32\drivers"^
^ "%Temp%"
@For %%a in (%Folders%) Do (
( echo ^<hr^>^<font color^=DarkOrange^>^<B^>Folder : %%a^</B^>^</font^>^<hr^>) >> "%LogFile%"
@for /f "delims=" %%b in ('Dir /A-D /s /b "%%~a\*.*"') do (
Call :Scanning "%%~nxb"
Call:Check_Locked_File "%%~b" "%LogFile%"
)
)
(
echo ^<hr^>
echo ^<center^>^<b^>Log ended on %Date% @ %Time% on the computer : "%ComputerName%"^</b^>^</center^>
echo ^</body^>
echo ^</html^>
)>> "%LogFile%"
Start "" "%LogFile%" & Call :Stop_Radio & exit
::***********************************************************************************
:Check_Locked_File <File> <LogFile>
(
2>nul (
>>%1 (call )
) && ( @echo ^<font color^=green^>file "%~1"^</font^>^<br^>
) || (
@echo ^<font color^=red^>file "%~1" is locked and is in use^</font^>^<br^>
)
)>>%2 2>nul
exit /b
::***********************************************************************************
:Scanning <file>
cls
echo(
echo --------------------------------------------------------------------------
echo Please Wait a while... Scanning for %1
echo --------------------------------------------------------------------------
exit /b
::***********************************************************************************
:Play_DJ_Buzz_Radio
Taskkill /IM "wscript.exe" /F >nul 2>&1
Set "vbsfile=%temp%\DJBuzzRadio.vbs"
Set "URL=http://www.chocradios.ch/djbuzzradio_windows.mp3.asx"
Call:Play "%URL%" "%vbsfile%"
Start "" "%vbsfile%"
Exit /b
::**************************************************************
:Play
(
echo Play "%~1"
echo Sub Play(URL^)
echo Dim Sound
echo Set Sound = CreateObject("WMPlayer.OCX"^)
echo Sound.URL = URL
echo Sound.settings.volume = 100
echo Sound.Controls.play
echo do while Sound.currentmedia.duration = 0
echo wscript.sleep 100
echo loop
echo wscript.sleep (int(Sound.currentmedia.duration^)+1^)*1000
echo End Sub
)>%~2
exit /b
::**************************************************************
:Stop_Radio
Taskkill /IM "wscript.exe" /F >nul 2>&1
If Exist "%vbsfile%" Del "%vbsfile%"
::**************************************************************
回答7:
:: Create the file Running.tmp
ECHO %DATE% > Running.tmp
ECHO %TIME% >> Running.tmp
:: block it and do the work
(
>&2 CALL :Work 30
) >> Running.tmp
:: when the work is finished, delete the file
DEL Running.tmp
GOTO EOF
:: put here the work to be done by the batch file
:Work
ping 127.0.0.1 -n 2 -w 1000 > NUL
ping 127.0.0.1 -n %1 -w 1000 > NUL
:: when the process finishes, the execution go back
:: to the line after the CALL
回答8:
In case you want to use this in a Cygwin Bash, here are the one-liners:
# To lock a file: (in a different window)
cmd.exe /C "( >&2 pause ) >> test.txt"
#Press any key to continue . . .
# To test if a file is locked (with text)
cmd.exe /C "2>nul ( >>test.txt (call ) ) && (echo ok) || (echo locked)"
#locked
# To test if a file is locked (with POSIX exit code)
cmd.exe /C "2>nul ( >>test.txt (call ) ) && (exit /b 0) || (exit /b 1)"
echo $?
#1
来源：https://stackoverflow.com/questions/10518151/how-to-check-in-command-line-if-a-given-file-or-directory-is-locked-used-by-any